Search results

  1. ismokeinbinary

    What happened to the cotton?

    About 8 months ago I got my first RTA, a Lemo, and I ordered $5 worth of "Koh Gen Do" OJC and I received 10 "sheets" of some very thick and fluffy OJC. Fast forward to a few weeks ago, I ordered another 5 sheets from the same vendor and I received noticeably smaller and thinner sheets similar to...
  2. ismokeinbinary

    Sub Ohm Tanks!

    Just let it go Ninja, just let it go..
  3. ismokeinbinary

    inokin subtank?

    No. That doesn't sound normal, maybe turn it off and on again?
  4. ismokeinbinary

    inokin subtank?

    But if it's open more you can get a hit, right? Also be careful, sometimes closing airflow off too much can flood your coils.
  5. ismokeinbinary

    inokin subtank?

    Uh, if the airflow is completely closed off there is no air running through the tank to deliver you the precious vapor inside.
  6. ismokeinbinary

    Sub Ohm Tanks!

    You can lead a horse to water..
  7. ismokeinbinary

    Sub Ohm Tanks!

    You can make rebuildable coils out of all the available wire types FYI. K, Ti, Ni, NiFE, SS, etc. Any wire you can get in a prebuilt head and more. And you can do quad coils and all sort of special wire builds in an RTA, more options than are available in a prebuilt. Honestly, considering how...
  8. ismokeinbinary

    Negative - I Am a Meat Popsicle

    Welcome. I actually saw Coheed live in Florida, also if I remember correctly you quoted the fifth element, which is an awesome movie.
  9. ismokeinbinary

    Coffee Flavor E Juices???

    They recommend adding their whipped cream flavor to the top of the morning flavor to get a coffee and cream taste. Sounds like it would be good to me, haven't tried it though.
  10. ismokeinbinary

    Aromamizer RDTA by Steam Crave

    I would just force it out and see what the deal is, but that's just me... Seems like a post screw backed out a bit and is preventing you from removing the deck.
  11. ismokeinbinary

    My pen

    Looks to me like I can still see threading that isn't fully screwed in from the top half to the bottom half. I started out on Kanger mini protank 2s and never had a problem with leaking. The biggest problem most people have is not screwing the coils in tight enough. Good luck.
  12. ismokeinbinary

    Coffee Flavor E Juices???

    It's a strong coffee flavor, too strong for my liking. I usually go with fraps or caps. If you order from VW normally you can request it as your free sample.
  13. ismokeinbinary

    Coffee Flavor E Juices???

    Vapewild has a few good coffee flavors. The Vapor Chef has an awesome pumpkin spice latte called "I can't even".
  14. ismokeinbinary

    Aromamizer RDTA by Steam Crave

    Oh, just pull it out, there is only an oring holing it in the chamber. If I'm understanding you correctly, the deck came unscrewed from the base and is stuck in the chamber? If so you just pull it out, it wont harm anything.
  15. ismokeinbinary

    Aromamizer RDTA by Steam Crave

    The negative post is one piece with the deck, so you can apply force to that one post.
  16. ismokeinbinary

    Aromamizer RDTA by Steam Crave

    Is this your first one?
  17. ismokeinbinary

    New Youde RTA the Bellus

    Thicker orings?
  18. ismokeinbinary

    Sub Ohm Tanks!

    When people say "bottom airflow" it's referring to the deck, where the airflow outlets/holes are located below the coil. I used correct terminology.
  19. ismokeinbinary

    Sub Ohm Tanks!

    The Bellus is an RDTA, so the airflow comes from the sides unlike the Zephyrus which is a traditional bottom airflow tank. I personally feel that RDTAs are the future of the RTA game.
  20. ismokeinbinary

    Sub Ohm Tanks!

    All I'll say is: I bought a $5 pack of OJC and a $5 spool of wire 8 months ago and I still have enough for another 8 months. And the Aromamizer, Crius, MT, and Bellus are the current "top of the line" RTAs and they do not leak if wicked properly. Also I'd be willing to bet my Aromamizer puts out...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu