Search results

  1. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Sounds about right, tj - give it a shot, it's not like you don't have plenty of material to re-wick with if it's not correct... :laugh:
  2. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Y'all are welcome... I saw it linked from here on ECF a while back and saved it... Here's an excel spreadsheet that will give amps/watts for coils on a Provari - set up to where, if it's above the amp or watt limit, it won't return a reading. Atomizer ohms is a dropdown menu ranging from 0.3...
  3. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    8 wraps will give you 1.9 ohms, 9 gives 2.1 ohms...
  4. M

    The Erlkönigin : PICTORIAL

    The list *did* say "Similar quality devices".... :p (yes, fogger fans...that's a *joke*)
  5. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    You want to trim at an angle - if you look at the wick when it's sticking straight out from the coil, you want to cut where it comes to a point as it hits the deck. Bad paint pic attached:
  6. M

    The Erlkönigin : PICTORIAL

    Brand new....don't expect it to drop soon...
  7. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    That *does* sound tasty
  8. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    In the signature.... Boba's...King of the coil-gunkers!
  9. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    The one I just changed out was pretty black inside the coil... more evidence I was using too much, if I remember correctly from earlier in the thread.
  10. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I'm running higher watts with the rayon, as well.
  11. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Still fighting to find the right amount and setup... but it's certainly no worse than I was getting on my R91. Opening up the airflow seems to have helped some with the gunking, and I think I was feeding too *much* liquid...the hiss/gurgle was deeper/muted.
  12. M

    The Erlkönigin : PICTORIAL

    Trying this now with thinning the tails even more, was getting gunking and reduced flavor with a rayon wick.
  13. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I'm using a 3/32 coil at 1.6 ohms on a Provari, running about 12.5 watts. Airflow is pretty open, had to install the spacer under the screw of the Erkonigin to get some room to bring the airflow out a bit more.
  14. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Ok, rewick time... coil was (again) fairly gunked up. Was still getting vapor, but had lost flavor and only getting the sweet of the VG. Wicked with ~1.5x coil diameter (stretched), not as tight as before but still seemed to fill the coil, *really* thinned out tails for juice wells in the...
  15. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I regret nothing!! :p
  16. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Adds that bit of 'je ne sais quoi', though... :tongue:
  17. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Thanks - I'll give the 'step down' wicking density a try.
  18. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I don't think it's sorted, yet....let me go through how I do it. I cut off a piece of CC, separate out a section and then lightly smooth it with my fingertips, like we used to smooth out a slightly crunched/crooked cig - too much 'pull' at this point pulls the fibers apart in the middle of the...
  19. M

    protovapor xpv

    I'm 889, so that gets my notice somewhere around the week of the 4th... gonna have to change my shipping addy, I think, with the delays in getting stuff to military mail, I think I'll be in the States when it actually ships.
  20. M

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Thanks - my wick isn't see though, I'm using about 2.5x the diameter of the coil and I'm not twisting it any more than necessary to get it through the coil. It *is* tight enough that I have to hold a finger against the Provari or it'll fall over as I pull the wick through, so maybe I'm using...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu