Search results

  1. phee

    Mile High Vapefest - May 24th

    sounds great!
  2. phee

    Check out my Nano "dragon" Coil build

    alright here's my first ever attempt (also my first venture into cotton) 1.Oohm the cotton doesn't wick well at all, i'ma try and build a sub-ohm one on my igoW
  3. phee

    Check out my Nano "dragon" Coil build

    I've been building for a good year but haven't ventured into micro/nano coils with cotton but will have to try it out tonight.
  4. phee

    Sigelei Mechnical Mods

    I actually do own two DMMs, an analog voltage meter and built and several ohm readers (I work with a lot of circuitry in my spare time) Anyhow, I what i meant by "where is the question" is where the heck the short is, the meters aren't picking up any readings - I figured I'd post to see if...
  5. phee

    MKB-TS Mechanical Mod (GGTS Clone)

    Thanks for info! I searched all around town to find a place that carried these brass sheets, finally found a place that carries them: HobbyTown USA sells'em for about $4. Made myself a shim and the switch is significantly cooler, not hot but still gets warm - at least the mod is usable now...
  6. phee

    MKB-TS Mechanical Mod (GGTS Clone)

    I've been fiddling with my MKB-TS for a week now and the button still gets got has hell. I've made sure everything's clean, sanded all connections down, made sure the switch assembly is nice and tight but nothing's worked. Running it w/o a kick with an IGO-W at .8 dual ribbon. I'm using stormy's...
  7. phee

    Sigelei Mechnical Mods

    yes, agreed. where is the question…
  8. phee

    Sigelei Mechnical Mods

    I've got a sigelei 8D, fired a few times when I first got it and suddenly the damn thing stopped firing - can't figure out for the life of me what the hell's going on. I must have taken the thing apart a 2 dozen times and sanded every possible connection and still nothing. anyone have any ideas?
  9. phee

    Mod Stands

    Also, if you're looking for cheap stands go to cosmetic supply shops and look for acrylic stands - they're nearly perfect for vape stations.
  10. phee

    Mod Stands

    It's not a mod stand but I find this to be a bit more versatile I know it's a little excessive but I think it looks cool - lol anyone interested here's the box and here's the insert and here's a quick gallery
  11. phee

    The Next Big thing.... Porous Ceramic Wicks

    "oh snap!" after about two tanks this thing wicks like a dream =] on a similar note, i'm very out of the loop on this birdhouse dealy - can someone explain it's function?
  12. phee

    The Next Big thing.... Porous Ceramic Wicks

    I've put a 4/5 wrap with some .5x.2 ribbon and it's working out quite well but I find it's not wicking all the way up to the top and I'm having to drip on it.
  13. phee

    The Next Big thing.... Porous Ceramic Wicks

    I was attempting a micro-coil with 28G they're extra tight on that last picture; resistance came out to be 2.3 which was way to high so I started to take away wraps until it hit about 1.0 - I'm still not completely satisfied with the build, I may start again and throw some low-res ribbon on it...
  14. phee

    The Next Big thing.... Porous Ceramic Wicks

    Being impatient and using the regular discs taught me a good lesson; ground down two entire discs and then had to resort to a hacksaw to get that tiny chunk off! I'll pick up some diamond discs down the road off of amazon when my budget lets me.
  15. phee

    The Next Big thing.... Porous Ceramic Wicks

    Here's my quick journey
  16. phee

    Post pictures of your working wick and coil setup

    AGA-T+ with Provari Ribbon (2.9ohm) RSST with K100+ (1ohm) I did a microcoil on my PHOENIX4 but didn't take a picture.
  17. phee

    Vape Meet: August 17 at 6pm at The Fowl Line

    i'm curious as to what the age ranges are at these meets
  18. phee

    SS mesh wick help

    I figured out my issue's got to be oxidization. Sometimes under, sometimes over - I've recently switched to SS cable and was still getting .9ohms on a 5/6 wrap, it shorts somewhere. I've ditched the SS wrap over the SS cable and have gone with using a SC116 diaper and that solved all of my...
  19. phee

    Wire Rope for Wick?

    I've been messing with the rope with my AGA-T2 for a few days now with 500mesh (single wrapped) and .05x4 ribbon kanthal on a provari - i'm getting 1.5ohms but it seems to move up and down, my voltage is at 4.0 but I still get dry hits every other hit; i think they're actually hot-leg burns...
  20. phee

    SS mesh wick help

    I have been messing with my AGA-T on and off for months and the wick has always been a problem for me. I can get the coils right quite easily, even glow with almost no effort but getting the mesh to wick juice is my issue. I've tried every method out there: nail, paperclip, rolling-paper; little...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu