Search results

  1. Saintskinny51792

    Temp control advice

    When you lock your mods resistance, your effectively telling your mod right now the coil is at 70° and this is the resistance. If you lock your resistance after the mod has just been fired ( before the coil gets to room temperature) then it will think whatever temperature it's at when you lock...
  2. Saintskinny51792

    what are some mods that will fit a 25mm atty?

    What kind of range do you have to work with? There are a lot of devices now that will do 100+ wives and you can get them for under $40
  3. Saintskinny51792

    ISTICK LOVERS THREAD!

    What a nice looking family! Lol those Ccell coils have really peaked my interest! I haven't had a chance to try out any ceramic coils yet, but the he reviews look good from what I've seen. I'd like to find a deal like that on the melo 2, the issue is being able to afford it when I finally do! I...
  4. Saintskinny51792

    Eleaf iStick 100w TC

    I used a firmware editor to change a couple of the things on my TC120w and it was pretty easy! I changed TCR settings from M1, M2 and M3 to Roman numerals, I, II, and III. I also changed The stealth mode message from stealth mode on and stealth mode off to ninja mode and phat clouds. IDK the...
  5. Saintskinny51792

    what are some mods that will fit a 25mm atty?

    Istick tc200w is the Same size as the RX but the 510 is CENTERED! :shock:itSo basically any tank that may overhang even on the rx, will fit it. not sure of the dimensionsntho
  6. Saintskinny51792

    subohm stealth builds?

    It kinda depends on the device. Regulated, or mech? You may need to increase your resistance if your using a mechanical mod. What is your setup that gives you too much foggage? I have a TC40w I use in more conservative situations, you can find em for ~$25 online if that's an option. With TC you...
  7. Saintskinny51792

    ISTICK LOVERS THREAD!

    I got a mental image of you juggling rx200s whilst vaping each one simultaneously when I saw 'a few rx200s' lol I really like the pico, I would have one but I opted for the kanger drip box for my bi-weekly drives into Grand Rapids, I will prolly end up getting the kit in the next month or so...
  8. Saintskinny51792

    True Hybrid

    I used to have an aqua, always wondered why the 510 came off like it did... after I got the 3d I was unscrewing the 510 to put it on my nemmi and it hit me like a freight train... I bought it when I thought HYBRID meant no 510 pin...too bad It got lost in the move
  9. Saintskinny51792

    True Hybrid

    Just got a 3D for my Nemisis! love the concept of this lil bugger! Gonna build it tommorow and check out the squonky/plunger deal, It may be good for out and about. My first True hybrid setup is completed he he shinyitis Got me again. Any tips on building this guy?
  10. Saintskinny51792

    having trouble with my first TC Mod

    Awesomeness! How you liking the TC Vape? Just so ya know you may be able to use To in Ni200 mode, the temp will be off by a certain amount but some people simply start low and adjust the temp (*read by mod*) to suit there vape. I say it like that bc when set to, let's say 400, since its set for...
  11. Saintskinny51792

    ISTICK LOVERS THREAD!

    Thanks guys! Any experience w/ IMRBATTERIES.COM?
  12. Saintskinny51792

    ISTICK LOVERS THREAD!

    Ooh, that's no bueno! I'm about due for new battery's myself. Any sites suggested?
  13. Saintskinny51792

    What is this? 18350 ego/510 threaded

    Awesome, thanks Ninja! I think the B&M I bought it at had called it the Caravela, it was a clearance deal for $10-$12 or something. I like the lil guy tho, the firing button is much more dependable than my Sioux or Nemesis. I had a couple that had a 'sweet spot' you had to find to get it to...
  14. Saintskinny51792

    having trouble with my first TC Mod

    building with Ni200 is WAYY different than with kanthal'your ohms will be much lower than your used to so you may have to do extra wraps or increase inner diameter of your coil. To get to .8 with ni200 you would need 206 wraps with 2.5mm ID lol a 3.5 mm ID 6/7 wrap coil is about .03 ohms...
  15. Saintskinny51792

    having trouble with my first TC Mod

    I would try SS316 or TI. They have lower TCR but higher resistance. Do you know the specs of minimum resistance in TC for your mod? If you misread .08 as .8 it may seem fine but your mod may only fire to .1 in TC mode. .08 seems about right for dual ni200 build if memory serves... but I only...
  16. Saintskinny51792

    What is this? 18350 ego/510 threaded

    This is the inside of the button adjustment
  17. Saintskinny51792

    What is this? 18350 ego/510 threaded

  18. Saintskinny51792

    What is this? 18350 ego/510 threaded

    So when I got my mod stuff unpacked, I came across this lil guy. 18350 mech mod w/ ego threading ad well as 510. For the life of me I cant remember the name! I came across somebody asking if these exsisted but I didnt know the name so wasnt any reason to post saying "I have one but dont know the...
  19. Saintskinny51792

    Custom Vape Firmware for Evic VTC, Cuboid, RX200

    Can you use some of the preexisting setups on the Istick TC100w/ 120w? Or do I have to make my own?
  20. Saintskinny51792

    funny accessories/gimmicks

    We've all felt like giving the finger to someone for one reason or another, so i bought this so i dont wear out my knuckles
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu