Search results
-
Svoemesto Kayfun V5
I would suggest to take all o-rings down very carefully not to damage them by dismounting, inspect them, lube them in your hand then install them back if not damaged. Sometimes dry placed o-rings can twist a little and as much as you lube them after they will not do the job properly. If they are... -
Svoemesto Kayfun V5
When my K5 was leaking one of the reasons I read in the forums was that the liquid holes may be blocked with cotton. In my case it were the o-rings but the whole leaking messed up my wicking technique. When I checked the length of the wick it seemed it didn't touch the bottom by about 1/2 mm. So... -
Svoemesto Kayfun V5
thanks Exchaner! The problem was actually not entirely like yours but somehow in this area and what you said gave me an idea and I think I figured out the problem! Re-wicked today and so far so good! Fingers crossed to see next days if problem is really solved or it comes back! -
-
Svoemesto Kayfun V5
That's what I don't understand! wicks identical, coil heats from center outwards, tried several coils and the same result. SS and kathal acts the same! The darker part is actually with "kooked" e-liquid because if I put the wick under water it gets white so it is not burned. Before the o-rigs... -
Svoemesto Kayfun V5
I still have something I don't understand: When I check the cotton of the kayfun 5 on one side of the coil the de cotton is white on the other one is dark braun all the way down in the liquid holes. Checked air holes, liquid holes, everything. Nothing different between left and right. Did it... -
Svoemesto Kayfun V5
on the website steam-engine when you enter coil calculator, configure your coil and when playing with the watts up and down you see the heat flux. it even varies the colour blue - green - red which I guess is blue to cold, green ok and red too hot. Now you see why I wanted to use the mech mod... -
Svoemesto Kayfun V5
Thanks for the detailed answer! Regarding the batteries, I'm an electrical engineer and work in power supply field especially with UPS-es and their batteries so unless I get very drunk ... I should be safe. Also vapor giant mech mod is very well build and quite safe (idiot proof). Also it is... -
I like vaping much more then I did cigarettes and cigars
I like vaping much more then I did cigarettes and cigars- Hadrian21
- Profile post
-
Svoemesto Kayfun V5
the coil that works nice on mech is at 0,66 ohm measured with pico. Next build I will try at 0,7-0,75 ohm because it is now almost too much vapour. Now I need to learn when battery is empty so I won't discharge it too much with the mech. Dumb beginners question - how does actually a dripper... -
Svoemesto Kayfun V5
i have never done smaller coil then 2,5 mm because I'm afraid it will be too little cotton and the juice holes might not be covered properly - or at least not with my current skills! Thanks for steam-engine website hint! Didn't knew about it and it really answers a lot of my questions and now I... -
Svoemesto Kayfun V5
Good that I asked about the nautilus before spending money. Now back to kayfun 5 - I purchased with it also the vapor giant mod 2.5 - mechanical Vapour production not that good. I have ss and kanthal both at 28 ga - 0,23mm. The coils - not that big and spaced - 5-6 turns on 2,5mm. With ss it... -
Svoemesto Kayfun V5
I heard a lot of good stuff about nautilus and considering the low price I think I get one next week to play a little with it. I like that even it uses prebuilt coils it has a chimney which should make a difference. you say about money for coils - how much does in average a coil work? I heard... -
Svoemesto Kayfun V5
I searched the vaporizer you mentioned and serpent seems identical to melo. If you want a cheap tank from what I see now the coil is the hole deal. Juice comes from tank to coil and directly in your mouth. From what I see as an engineer but with no experience in this field the only properties of... -
Svoemesto Kayfun V5
ECML 0.75ohm Head - Eleaf electronic cigarette found link too! -
Svoemesto Kayfun V5
it was a special mtl coil build by eleaf. ECML 0,75 ohm. ML comes from mouth to lung. Wanted to send you the link but it seems they changed the products. Probably somebody tested it. The liquid holes are almost blocked. The new ones have round holes as aspire from what I have just seen on their... -
Svoemesto Kayfun V5
I didn't want to give up on melo so I just installed 10 min ago an 1,8 ohm aspire coil. Vapour production very good, taste very good, the only problem is that from time to time I get small e-liquid drops in my mouth. Mtl coils have a much smaller hole in the middle - 1/2 or even 1/3 diameter... -
Svoemesto Kayfun V5
thanks for the advice! Clones depend on luck - you can get a rubbish pcs or something that is like the original. As you have seen above I'm not very lucky about this stuff - I received even the original with some problems - so ... I have also purchased a melo 3 mini with my pico and purchased... -
Svoemesto Kayfun V5
as every "recent quit smoking" I'm still at MTL vaping so I use it with MTL kit. The alternative I wanted to purchase is squape x dream with the mtl base. Does anybody vape MTL and has both - Kayfun 5 and squape x to tell me which has better vapour and flavour in MTL style? As mods I have... -
Svoemesto Kayfun V5
Hi, let me share my detailed experience of Kayfun 5 LEAKING, GURGLING, FLOODING, SWEATING and how I totally solved it: 1,5 months ago I received my Kayfun 5 and entered in contact with the vaping experience and vaping world. I lubed the o-rings and started using it. Problems: - sweating a lot...