Search results

  1. OperationMove

    What is your ADV that you have made and made again?

    I am with the guys talking variety, I have probably 20-30 different flavors in 10ml's in their testing phase. I do, however, have at least 60 ml of these two simple recipes at any given time: 15% OSDIY Blue Slush 4% TFA Pineapple 1d/5ml TFA sweetner 1d/5ml TFA EM 10% 20/80VG, 7mg 5% TFA Red...
  2. OperationMove

    DIY'ing and questions about certain flavors/recipes at Sub ohms (25+ watts)

    Does anyone here vape sub ohms regularly? I'm sure they do that's a rhetorical question. Regardless, I am a 25-40 watt vaper normally (about 0.63Ω at work and Ω0.4 at home ) and I normally use around 6mg nic and mix around 20/80VG so I know it's not the high PG giving it a hard kick. Now to my...
  3. OperationMove

    Aga t-2 is not firing

    Back when I had my AGA-T2 I had the exact same problem. When you put the 3 nuts on over and over again on the center post (Or accidently assemble it wrong) the center post isn't sticking out past the 510 connection threads, so until that makes a connection it will not fire. I know this has...
  4. OperationMove

    Kraken RBA - SHOW ME YOUR BUILDS!!

    I have had a great experience so far with my kraken. I have ran both duals, single, and wicks of mesh, eko/cable, and cotton. I gotta say at the end of the day I use it at .95 Ω single coil on cotton as my daily driver for my favorite cinnamon vape. I ran duals on it for a while and that...
  5. OperationMove

    Buying My First Mod (List Inside)

    Plus I was a much heavier smoker, since he said he'll be using the vamo at home mostly, I recommended switching and going with 350's, that'll help cut the size down some since he'll be near a charger.
  6. OperationMove

    Buying My First Mod (List Inside)

    I am said friend that OP mentioned, and usually a mech user in 18500 mode. I totally understand what you're saying, but almost any VV mod (SVD, tesla, Zmax) are all monster sized in 650 mode with a tank type atty on them. It's the nature of the beast I guess. Compared to a T-3 tank and a...
  7. OperationMove

    Vaping obsession

    That would be me! Vape on Tom. I know soon enough you'll be sitting at the desk staring at a couple nemesis, kraken, ac9, and a patriot like me right now! LOL! Cheers. :toast:
  8. OperationMove

    That worked! What to do when it's not that good...

    I mixed MBV vanilla custard and some vanilla tobacco and it also ended up quite tasty. It can never hurt to try right?
  9. OperationMove

    Check out my Nano "dragon" Coil build

    Is anyone else besides me running high amount of wraps on a build like this? Most of the ones I've seen throughout the thread have been lower. I'm talking wraps not resistance/wire gauge. I just finished building a dual coil dragon, tight twisted 30 gauge, 12 wrap per side, around an atty hex...
  10. OperationMove

    22mm RDA's

    Nimbus is 20mm from what I remember. It will NOT fit perfect on your nexus. Obseve here. Also the Omega is another 22mm option. Just figured I'd answer this for ya since alot of others didn't. All I did was type "Nemesis Nimbus" in google search and it gave me that. Try that next time!
  11. OperationMove

    NEW *AW Battery Importers & Exporters of America* (Shipping Worldwide)

    I will be sending payment shortly for the following, Thanks for the great prices on IMRs: 2x 18650 1600 mah, unprotected, button top, AW IMR (9.50 x 2 = $19.00) 2x 18500 unprotected (Button or flat I dont care) AW IMR (8.50 x2 = $17.00) Standard Shipping = + $4 $40 Total will be sent to your...
  12. OperationMove

    Nemesis Magnet Upgrade

    I too saw this and wanted to order them instantly from the site... I could even use a longer contact set as well but not at that kind of shipping costs
  13. OperationMove

    Blackened Coil & Wick inside a week?

    I've only been playing around with rebuildables for a few months now, but I'll still take a guess at the problem. This was happening to me on my octopus rebuildables as well as clearos when I first started rebuilding. No matter how many times I rebuilt them they always tasted burnt within a...
  14. OperationMove

    Genesis style noob has questions about wicking.

    Definitely want to get it firing good and even first before you add any juice. I made this mistake when I first got into gennys and I had the same problem you did. I've heard 100% VG should be broken down a little with water to make it crawl up the wick right, otherwise most 100% VG users seem...
  15. OperationMove

    1st RSST Build w/Photos

    Would I be right to assume that 10 wraps @ 1.3 ohm would take alot longer to heat up completely compared to 3 wraps at 1.3 ohm? I like to hit the button and get a good vape straight away, which is why I lean towards lesser wraps.
  16. OperationMove

    RBAs that do NOT leak?

    Obviously Genesis systems are not the best for a leak-proof system, but I regularly take my RSST and AGA-T2 to work with me and throw it in my side cargo pocket. I do use a near solid wick that's rolled pretty tight and fills most of the wick hole, so perhaps that's why I don't have too much...
  17. OperationMove

    Upgrade to RBA

    Yes, if you want to get the most out of an RSST you will need a mechanical Mod to use, but on the Evic you will need to know everything mentioned already, but also you might as well read up on rebuildables in general. You will also need to learn to meter the coils you build correctly, to...
  18. OperationMove

    Questions about drip rba

    I know you said price is irrelevant to you, but you can pick up a Smok octopus for like 9 bucks online or an I-go L (also cheap), grab some 28-32 ga. wire, wick, etc. and see if you even enjoy drippers. It's a much different experience altogether that can require alot of effort on the buyers...
  19. OperationMove

    1st RSST Build w/Photos

    For that being your first rebuildable, the coil looks pretty nicely built! Glad to hear it's working well for you. Oh, and totally agree with the last poster, you will definitely be able to achieve 1.5 with 30 gauge although the way I wrapped my 30 ga. I ended up with 5/4ish wrap before I got...
  20. OperationMove

    Had a good experience with a non-vaper today :)

    It's suprising how uncommon it still is in alot of places. I live in a suburb of Cleveland, Ohio, and most of the time people out here think you are doing drugs or something outrageous until you explain yourself to them and even then they give you one of those looks :blink:. I suppose a black...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu