Search results
-
3-Stage Variable eGo with LED screen & Super kits Exclusive to GV 3 Stage Variable EGO(2 batts),Cone,5 TC Clearomizers IN STOCK NOW!!
Most lithium cells give 4.2V for a very short time when fully charged. Thy quickly drop to around 3.7V for most of the charge lifetime. -
Is there a 4.2v
Something close: http://www.e-cigarette-forum.com/forum/gotvapes/210370-its-variable-its-ego-has-lcd-battery-indicator-screen-has-dropped-exlcusively-gotvapes-com-3-stage-variable-ego.html Not very good at holding the voltages, but a good attempt.- pmos69
- Post #4
- Forum: General Vaping Discussion
-
V-Drop on VV eGo on partial Discharge
... and an OFF setting. ... and a better button. -
V-Drop on VV eGo on partial Discharge
Would have to agree with that. And the actual usage experience is very good. -
V-Drop on VV eGo on partial Discharge
Here are some unloaded and loaded measurements made by my friend ITA: Atty resistance: 3 Ohms Vu - Voltage unloaded VL - Voltage under load Fully charged - 5 led bars: Vu: red: 3.03-3.3V; purple: 3.70-3.8V ; blue: 4.2V VL: red: 2.80-3.1V; purple: 3.46-3.6V ; blue: 3.9V... -
GotVapes - Introducing the eGo Variable Voltage 3 Stage 510 battery Kit! USA DEBUT!
Works fine with an eGo charger. -
GotVapes - Introducing the eGo Variable Voltage 3 Stage 510 battery Kit! USA DEBUT!
Just fine. And terrific with a cisco 1.5 Ohm 306 at 4.2V -
3-Stage Variable eGo with LED screen & Super kits Exclusive to GV 3 Stage Variable EGO(2 batts),Cone,5 TC Clearomizers IN STOCK NOW!!
Unfortunately, not at this time. haven't got suitable gear where I am. Sorry. There has to be a booster in there, or else it would have to have 2 cells. (3.9V at mid charge is quite a lot) If it's a single cell in there, I would guess the regulator has to be some sort of hibrid (switching +... -
3-Stage Variable eGo with LED screen & Super kits Exclusive to GV 3 Stage Variable EGO(2 batts),Cone,5 TC Clearomizers IN STOCK NOW!!
Voltages measured without load: (Charged battery) - low: 3.15V - medium: 3.77V - high: 4.18V (Half charged battery) - low: 2.9V - medium: 3.5V - high: 3.9V (discharged + 1 minute charge) - low: 2.7V - medium: 3.2V - high: 3.6V -
A PBusardo Review - The Smoov E Cig
Nah. it should be a LiPo, like the Bloog/Volt/Jacvapour/Halo G6/...- pmos69
- Post #13
- Forum: E-Cigarette Video Reviews
-
Sorry please ignore
Newme just doesn't want others to reach "the knowledge". Ignore her (she likes it -> She's the master of the ignore-me thread). -
-
A PBusardo Review - The Smoov E Cig
If I didn't like your work, I wouldn't bother to comment. Near perfect is good enough ;)- pmos69
- Post #6
- Forum: E-Cigarette Video Reviews
-
A PBusardo Review - The Smoov E Cig
One correction: The Bloog and Volt PCCs are the same as the smooooooooov ;) and will fit a 78mm battery. You might have seen the previous version of the PCC (the drop-in version) from any of these suppliers, but they were also the first ones to carry the new (screw-in) version of this PCC.- pmos69
- Post #4
- Forum: E-Cigarette Video Reviews
-
Customer service appreciation
Just saying thanks for the great customer service, again. Had received a mini PCC with a defective battery. Reported that and on my next order there they were: Not one but two PCC replacement batteries. Now that's good service. -
Bloog MaXX Fusion Video Reviews
Here's another Portuguese review. This time in English: -
Bloog RY4 Fusion Liquid vs Prefilled RY4 Carts
A little boost on the "nutty" side of the 555 bottled juice would also be nice... -
MaxxFusion V2 -- are there any real worl difference?
They seem to handle 4.2V just fine, but I usually don't see the need to go above 3.7V.