It is not really a dual mosfet . The drain and source pins are connected. To get the full amps and maximum heat dispersion all the pins should be used. To answer your question the AT42QT1010 touch sensor chip should be able to drive the gate of any mosfet you want to use.
Got some AT42QT1010 in...
Thats pretty much correct. It has more to do with power or watts. Amps are not the same at different voltages. 1 amp @ 12 volts has the same amount of watts as 2 amps @ 6 volts. For example: Right now i am vaping off this switching reg. I am powering it off 12 volts. The out put is regulated to...
Yeah best way to clean in my opinion. I use everclear / PGA to clean my atties. No need to even let them dry out since it is food grade alcohol it can be safely vaped.
1k ohms = 1000 ohms, so 0.200k is 200ohms. Your meter should have a reg ohm setting maybe that will read it as 200ohms. At least most meters do not sure what you got.
You need a adapter with at least two amps. Even then it is going to drop but would should be somewhere around 4.1 to 4.6 volts while vaping, depending on the ohms of your atomizer plus the ohms of the PT. If you can find a 5 volt 3amp wall adapter that would even be better, but a two amp should...
Something wrong with that for sure. I roll with regular ohm atomizers but push them close to 5 volts and i get a 2 to 3 months out of one. I couldn't afford to vape if i blew up a atty every day.
You really dont want to power a Passthrough off a expensive laptop. Buy you a 2 amp USB walladapter or a 2amp powered USB hub they are around 10 bucks so if something fries it is not that big a deal.
No i didnt make the switching power board. Tenergy used to make them, discontinued now days. Comes in handy for sure, i don't vape off it much anymore but i use it to power my bread board and test circuits. It was my first VV experience plug a straight Through PT into it and you got a VV PT.
Here is a double barrel silver bullet review on you tube. A 2 to 1 tip would be pretty easy to make. Someone posted about 6 months ago he was going to make one not sure if he ever worked it out or not.
Edit: almost forgot about this simple one i made for my passthrew last year...
Not really new been quite a few mods out that will run two atomizers at the same time. There was a double barrel and there is a screwdriver double that was out. A evercool circuit could handle the amps /power required for sure if it was powered by a couple 18650's japan made
Oh yeah , you got to watch out for those damn cinnamon bee's , they will sting you. Never tried atomic cinnacide I make my own blend and do keep it on the mellow side.
I never was a menthol smoker , but now that i vape it agrees with me. Funny thing too is is cinnamon and menthol never sounded...
here be the rules :
0 to 5 posts:
Members are restricted to posting in the New Members Forum only, can not use Private Messaging, and can not have a signature.
5 to 15 posts:
Members can post in other forums and use Private Messaging.
15 posts and above:
Members can post in all forums, and can...
How much they going to be $$$$$ Or is there a link to a buy me thread or something? Oh yeah i almost forgot to ask but how much of a discount would i get if i said i think your avatar was awesome :)
I am sitting here Drinking beer and vaping Some Fire and Ice ( cinnamon and menthol). I would have to say it tastes even better then it does while sober.:toast::banana:
The Linear reg could also be thermally regulating itself and cutting out at the high amps or it could be what you posted both are feasible.
Something is wrong on that video. Seen lots of IMR's tested and they don't preform that bad. My guess is he got a bad cell or maybe something to do with...
The AW IMR 14500 could for sure handle it. Unlike li ions they have a max amp output of 8*C which means 4.8 amps per a single cell. But yes even with a switching reg your going to taxing the TrustFires. They could very well work fineto vape but taxing them would cut their life span down alot.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.