Search results

  1. gadgetkeith

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    have you tried a 6mm id coil all i can say is WOW Did this just for kicks and giggles but it vaped fantastic . i modded an atty for science for single coils and it works great . just had to try out a super massive coil and it was fun vaped 6ml of juice in a couple of mins . it works...
  2. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    if you read the first post in this thread its all explained there are a couple of ways to remove the post you do this at your own risk 1st is to use a 3mm drill bit use the blunt end and remove the 510 center screw from atty and use the drill bit placed in the hole and gently tap and the pin...
  3. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    Two posts on one side i only put the 3.5 mm coil in it because it was on the shelf ready and waiting . with it set-up like this i like a 4.5mm id coil but the 3.5 was there so in it went . I do like dual coils but i find with fresh coils a single will flavor up quicker than duals.
  4. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    i used to be exactly the same love them dual vert clappys but i am realy liking this single vert clappy its a 3.5mm id 26-32 awg 8 wrap vert 1.3 Ohm and great @ around 30-35 watts
  5. gadgetkeith

    Can I clapton at 30 watts?

    i have an Aromamizer that ran with dual 26/32 clappys and it vapes fine at 30 watts the first couple of pulls are average but claptons hold their heat so once you get them running they vape very well and lots of vapor and flavor dual claptons 26-32 awg 5 wrap 3mm id 0.36 Ohms run @ 30 watts...
  6. gadgetkeith

    Velocity Coil Build Recommendations?

    a good easy build for lots of cloud and flavor is a parallel build take a small length of your 26 awg around 8 inches of wire fold it in half and squeeze the fold with pliers and then add 2 or 3 tight twists at that end then wrap the wire around your drill bit or coil rod . while wrapping the...
  7. gadgetkeith

    First coil build photos: help needed

    its a great atty and yes it will vape 100 percent VG when wicked correctly i also do not understand when some say its not got great flavor as it has great flavor
  8. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    am still running this mod and i love it great vapor production and good on juice works real well in single coil mode rewicked or rebuilt and rewicked quick due to just one coil half the fun of vaping is modding stuff to your liking
  9. gadgetkeith

    RTA Price Range $40.00 - Opinions Please!

    get an Aromamizer and mod it to do single coil like this its vapes realy well and good on juice depending on coil size and power used if you still want lots of clouds and guzzle juice it can still be done like this if used sensibly with coils upto 4 and 4.5mm its a very nice vape and does...
  10. gadgetkeith

    Aromamizer RDTA by Steam Crave

    sorry for the bad pic here is one of my velocity RDA's as you can see in the pic i leave the insulator bush in place and just rotate the post as the base is milled and the bush sits in a recess , so if you rotate both bush and post when you snug the center pin screw up it wants to pull the bush...
  11. gadgetkeith

    Aromamizer RDTA by Steam Crave

    I See a lot of ideas for single coil setups in this RDTA . here is my take on it if anyone is interested i have posted a thread detailing what to do. its very easy and you can mod it if you want to like i did but not needed if you run a smaller coil and lower watts. not sure it this is how to...
  12. gadgetkeith

    Vaping VS Chicken and Tomato soup.

    so when the BOSS says you not got time for both lunch and a vape its one or the other. take ya pick just tell em you gonna go vape ya lunch LMAO
  13. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    ok email sent would be nice to test some new stuff out
  14. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    Well if ya wanna chuck it in this direction im good with that LOL It would be great to try stuff out before release i am all for that and posting tips and tricks to help each other out is what its all about on these forums. I did have 2 of the originals but a friend kinda stole my spare so i...
  15. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    I dont think they realy interested as they get lots of people mail them with ideas etc . All they would need to do is add the extra juice hole and a blanking shim to the kit and it would be so much more versatile for dual and single coils . I have been vaping mine for a while now in this...
  16. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    I thought this would have had a lot more response as i read so many posts with users looking for single coil options on RTA's & RDA's and this also works with the velocity RDA and some others with velocity style decks. maybe one of the mods could move this thread to the RTA section or rebuild...
  17. gadgetkeith

    Anyone know what happened to AndriaD?

    sorry i just dont get the frying pan thing you can do lots more damage with a cast iron skillet and it will not bend or break so re-usable again and again
  18. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    when i first tried it without blocking off the almost covered juice holes under the post . i had the 6mm id vertical coil in it and the wick was sucking the juice up so fast i could almost count the draws it took to drain the first tank it was basicaly flooding and the wick was almost keeping...
  19. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    Thank You all Just wanted to share my findings big coils and thick wicks are pretty cool and loads of vapor etc. I realy just wanted share the single coil aspect of this type of deck , i have built between the posts horizontal and vertical but you are limited to the gap between the posts ...
  20. gadgetkeith

    Aromamizer Single Coil Set-up With a TWIST

    forgot to add this pic to show the new airflow directions