Speaking from my experiences with the CE2 clearomizers from royalsmokers/microcig the standard ego cones do not fit, they can be ground down however if you are handy with a dremel or other such tools. Just remember if you chose the grinding down method they need to be larger than a tight fit...
When I was using my v2s I found myself charging them 3-4 times a day when using the standard size (I had 2 that I would rotate on and off the charger as they died). Replacing one of the standards with an XL kept that to around 2-3. I use an ego-T 650 now that easily lasts me all day on a...
I have been using this exact method, and I cannot recommend it enough. Do not worry if you are missing the middle ring however, its just a nice to have and assists in ensuring a tight seal. As you go through CE2s you will build up a stock pile. Always always always save your old seals, you...
I thought the battery had some additional protection circuity as well as additional colors on the LED to indicate charge. Is that not the case? I was thinking about picking up an eGo-C battery just for the charge indicator but if thats not standard I may change my mind on that purchase.
Most multimeters have a resistance/continuity measurement setting. With the probes, put one on each conductor (one on the metal of the inside post, one on the metal of the threaded part), and see if you are measuring the resistance you are expecting. The resistance should match what the...
+1 Agreed 100%. I am a EE by degree so I have a couple of these laying around anyway. I find myself regularly checking the resistance of new carts and the voltage on my batteries. Definitely useful for a sanity check, also identified some mis-labelled cartos this way.
I don't guarantee thats what killed your battery, but its a possibility based on my experience. The P-ain I-n T-he A-rse seal is in fact that inner seal you have to pry out.
I am an RSS news junky and probably follow about 50 a day in my feed aggregator ranging anywhere from tech news, sports news, news news, etc. Are there any good daily news sites for eCigs? So far the only one I have found is Steve K's Vaping World - e-Cigarette Reviews and e-cig News which has...
If you look at the bottom "screw in" part of the cart you will see the center post that has what looks like a flat head screw driver slot in it. If that touches the outside threaded part it can cause a short. From what I can see, the only thing holding it in is a rubber seal and it does have a...
Look at the bottom post, it is touching the outside conductor? I had this happen on one after cleaning it and inadvertently pushing that post out. My ego-T flashed as well, I assumed due to a short detection circuit.
I have to agree with this, I started with V2 on the pre-fills and eventually went to buying the juice. Their cartos really arent bad at all and are really easily filled, just be sure you don't smoke them down until they taste burnt.
I think the auto KR808 form factor was a big part of what made the transition "easy" for me to quit with the smoking. I started with V2cig at the recommendation of a work buddy who was using them to quit smoking as well. For the most part, it worked just like a cigarette -- I inhale and puff...
I was never a big clove smoker but would enjoy one from time to time. The only clove flavor I have tried thus far is the one from awesomevapor.com and I thought it was pretty good.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.