Search results
-
M
iatty problem
Ebay is a great source for Crimp Beads I recommend a 1mm crimp bead or a 1.5mm but anything else is too big you will also need a micro crimp tool... I would go to a company called Twisted Jewels they sell on ebay but also have their own website if you order from the website and spend over 20... -
M
iatty problem
where is the wire melting at the top near the cone or the bottom near the base??? either way for the NR wire to melt it is making contact with the cone or tank body causing a SHORT circuit.... when installing a coil try to make sure the NR wire is securely tucked under your plastics and no... -
M
Kanthal A-1
Also try Amazon.com I found the 36g burns hotter faster produces more TH and if you like a cooler vape the 34g or 32g makes quite a difference... I also recommend that 36g be used for HV and that 34g & 32g is best used for LV coils... -
M
What I have and what I want. Need Info Please
From what I have seen in video and can tell from Imeo that the Odysseus will connect to your GGTS or any mod much like that of the iAtty... so you should be able to use the same set up you currently use to connect your iAtty to the GGTS... and depending on which mode youll be using rebuildable... -
M
Odysseus official
A wise man once said.... Don't sweat the petty things just pet the sweaty things!!! -
M
UFS, Finally, But not working
It will also unscrew the Atty if the top cap is screwed down to tight also making it hard to adjust juice control loosen the top cap a bit and things should move much smoother.... the top cap being the smallest piece at the top that the Atty goes through..... -
M
Odysseus official
Just to chime in Bruce @ COV has the tank upper body extensions available now for both UFS V1 & V2.... -
M
Got A GGTS! But the juice leaks from the UFS center post
Why we like fresh meat its yummy goes good with a nice Kiante....... -
M
Got A GGTS! But the juice leaks from the UFS center post
That is the only size Harbor Freight does not have in those kits I have mentioned before your best bet is to try a true value hardware store or even a Napa auto parts as they may carry such a small size... the o-ring kits from Harbor Freight are great for any other size you may need except the... -
M
Got A GGTS! But the juice leaks from the UFS center post
Have you checked the o-rings that are around the center post there are 3 of them and to do this requires taking the center post apart.... this would be the piece that contact the battery and is the base piece to your collection tank/air control.... -
M
UFS Atty's that fit?
What silent said ..... the new UFSv2 it don't need no stinking atty adapters man.... it shrinks to fit.... -
M
Iatty supply suggestions
Glad you got it my Droid is messing with me tonight I lost the whole paragraph and you clipped it good man now I don't need to retype it..... -
M
Iatty supply suggestions
Fright try using same gage silver wire but using half hard instead of dead soft.... its much sturdier than dead soft but doesn't like to twist with Kanthal and is best used with crimp beads.... I tend to twist the Kanthal around the silver wire then use a crimp bead and trim the excess.... -
M
Iatty supply suggestions
You can use all kinds of stuff but I prefer sterling or pure silver wire for NR at 30 to 34 gage dead soft... as for Resistance wire its 36 gage Kanthal A1 all the way.... be sure to buy A1-Kanthal.... all of which can be found on eBay or amazon... I also like using 1mm sterling silver crimp... -
M
SS O-Ring Question
Harbor Freight has some great o-ring kits for 7 bucks each I bought both the standard and metric kits and always have a spare o-ring when needed..... -
M
I Got A Short - HOT BUTTON & BATTERY!
AW IMR is safe chemistry so no spring needed but always check with a multimeter before use if they are giving more than 4.2v after a fresh charge they have gone bad..... -
M
I Got A Short - HOT BUTTON & BATTERY!
I run my GG without the spring but I only use AW IMR Batts the Energy LifePO4 will also be OK without a spring but no matter what you use always check your batteries with a multimeter before use and you won't lose any fingers....