Search results

  1. g.dampfer

    Coils for Protank 3

    The Kanger AFC Adapters work with single or dual coils. It is the tank that requires single or dual coils. You can use the AFC with a PT2 and use single coils or with a PT3 and use single or dual coils. I love the PT mini with the Aerotank Mini AFC.
  2. g.dampfer

    vamo v2 burning through coils super fast?

    If you tighten the airflow on the aerotank, you will force more liquid into the wick and this should help. You also can try to add a few drops of water per tank or remove one of the flavour wicks on the single coil.
  3. g.dampfer

    vamo v2 burning through coils super fast?

    RMS = mode 2, that's ok. Does your problem persist if you use brand new coils?
  4. g.dampfer

    vamo v2 burning through coils super fast?

    Are you running the Vamo in RMS or Mean mode? The Mean mode results in false voltage output and can easily burn a 2ohm coil!
  5. g.dampfer

    That Feel when

    Yeah! You got it - grats :hubba: ... your first time?
  6. g.dampfer

    Pg/ag mix %?

    If you are talking about PG/VG percentage: more PG: more TH, less vapor, less sweetness more VG: less TH, more vapor, more sweetness A 80/20 PG/VG mix should be ok, the sweetness may come from your flavouring, have you tried your mix without flavouring?
  7. g.dampfer

    Word Association Game - Part 2

    Edison (or Ford, couldn't decide) *** warning endless loop detected ***
  8. g.dampfer

    Word Association Game - Part 2

    Edison (or Ford, couldn't decide)
  9. g.dampfer

    SVD w/ patriot clone...so confused??

    Try to change your battery later. Even the red light is no traffic light! You can even vape on until the SVD shuts off. Maybe this keeps you vaping through your day. btw. your wattage setting decides how much you drain your battery. So lower resistance may help.
  10. g.dampfer

    aspire coil issues

    Maybe you got fake coils, see this thread: http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/557273-fake-aspire-bdc-coil-heads.html
  11. g.dampfer

    Protank 3 issue...

    IMO the insulator can only be squeezed by the positive contact pin, so you can tighten the head firmly to the base. As soon as you screw the battery on, the positive connector sqeezes the insulator thus eventually blocking the airflow. This is clearly Kanger's foulty design and was relieved with...
  12. g.dampfer

    want to buy the thing that the liquid goes in

    Still a CE4 - right? Unscrew the Battery, gently blow into the mouthpiece. Do NOT turn it upside down. A few drops of liquid will come off, so use a papertowel. Reassemble everything and you are ready to vape again. btw. the attys usually are worn out after a while. If you feel a strange or...
  13. g.dampfer

    Nemesis Help

    The magnets will only replace the spring inside the switch. The outer dimensions of the switch remain unchanged, so your battery will still rattle.
  14. g.dampfer

    Nemesis Help

    I still think, that ring below the topcap should be removable.
  15. g.dampfer

    Nemesis Help

    I think your pic shows one. Maybe it sticks to the topcap. It may be hard to remove, so take care not to damage it.
  16. g.dampfer

    Nemesis Help

    Maybe there is a thin ring on the tube (about 5mm for protected batteries). Remove this and your unprotected VTC4 will fit. Good luck ;)
  17. g.dampfer

    Is there a way to check ohms on hybrids?

    Sure you can, just use an oldfashioned ohm meter and measure between the center post and the outer threading... youre done.
  18. g.dampfer

    Random number game ends 2/7/14

    0030 ......
  19. g.dampfer

    Random number game ends 2/7/14

    0029 .. .. ..
  20. g.dampfer

    Random number game ends 2/7/14

    0028 ......
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu