Your battery threads are clean! :D
The water and vodka cleaned them for sure. The chrome plating is worn away and you see the tarnished metal behind it. This happens to most chrome battery connectors after a while. As long as your batteries still work, those threads are clean.
lol. My tube has been sanded, polished, drilled for the switch, pot and screw and put away. The only thing that really prevented me from finishing is that I couldn't find anything I wanted to use as a top cap.
That's why I mentioned the copper tape. A ring of copper at the battery end would make contact with the aluminum cap and help keep it a bit tighter.
As for keeping the batteries from pushing up, I put the circuit in a 6ml bottle with the top cut off (probably too small a diameter for your...
1. How thick is the tube? The madvapes chip tends to get pretty hot. Melting or yellowing of the tube is likely.
2. It's going to be a very tight squeeze getting the circuit and switch in there.
3. You'll need to run a wire or copper tape up through the battery section of the tube for the...
If you cut the mesh at a 45 degree angle, when you roll it up it will flex VERY easily. It wastes a little mesh but works like a charm. You can get pretty tight curves without any kinking.
Alcohol and silicone don't mix well.
I've had my SB going on 2 years and haven't had a problem yet.
IMO this isn't a SB problem but a design flaw in atty connectors. This can happen with almost any mod or e-cig battery out there. It's also one of the most common causes of shorting in eGo...
You can get an adapter to use 510 attys/cartos on your Kr808 batteries.
goodprophets probably has the lowest price but you can get them from most e-cig vendors.
The standard kr808 cartos are what the Boge's were modeled after. I think you'd find there isn't much difference if any between the...
I may be interested in a foot or two to test it out. If you want to sell some when you get it, let me know. I didn't even want to buy the minimum 10' just to try it. lol
I've not tried that juice.
From my experience and a lot of juice purchases, most juice's have very little to no odor at all in the vapor. I do have some tobacco's that leave a lingering cedar type of smell but most people don't even notice. Most juices that produce an odor smell like the...
When I see conflicting advice, I like to find out for myself.
What I would do in this situation is get 1 of the black AW's and 1 of the red IMR's. They will both work just fine and are really good batteries. THEN, after using them both, decide which way you want to go battery wise. You may...
If you're coming from delrin caps, you'll be very happy with these stainless ones. I'm debating whether to get aluminum now or another set of stainless. lol
I've had my Silver Bullet for almost 2 years now and I can't find one thing to complain about. Unless you're put off by the size.
The Silver Bullet is basically the mod that most other mods aspire to be. It's built like a tank (you could probably run it over with one) and simply works...
The mix of PG/VG has very little affect on flavor. The only real difference is the slightly sweeter taste of VG. Some mixes require a few days steeping time to get the full flavor. Some flavors simply require a higher percentage to get the taste you want. Different brands of flavoring vary as...
I'm guessing you tried the MAP tank that uses a CE2 carto since you mentioned poor wicking. I have 3 of those and I've mastered the CE2 problems but I still needed to try the next-gen tanks.
The new generation of tanks use the polyfilled cartos. They are available for the longer dual coils...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.