Search results

  1. Dudeman

    How did YOU learn

    In most mechanical mods, the positive end of the battery is directly connected to the atty connector. The negative from the battery runs through the body (tube) of the mod via the bottom button making contact with the battery and the tube. If you look at the pics of the switch, you can get...
  2. Dudeman

    Newb Cartomizer Questions

    Answers in red above. I'd also suggest a couple of ~2 ohm 510 atomizers for dripping and tasting juices. It's much easier to switch flavors and just drip a few drops than possibly wasting a carto or tank full of juice that you don't like.
  3. Dudeman

    Thread compatibility

    510 and 306 yes. 808d-1 and 901 yes. 302 is the same thread as an 801. Almost everything is compatible with adapters. :vapor:
  4. Dudeman

    hybrid mini/genesis atty supplies needed......

    I'll second these. You're going to be hard pressed to find someone willing to part with theirs. Especially the mesh.
  5. Dudeman

    Destroyed the electronics in an ego-t - what to do with it now?

    You can get the same board from Goodprophets with MUCH lower shipping. I say, get a $2 aluminum AA cell phone charger on ebay and put the eGo connector on that. I've made a few using cheap tactile switches and they're holding up good. I have 3 of the circuit boards but haven't gotten around...
  6. Dudeman

    510 batt connector-insulator

    I second the carto insulators statement. Nice tip Rocketman!
  7. Dudeman

    Silver Bullet Atomizers / Carts

    Regular ~3ohm Boge carto's hit pretty hard at 6V. Just keep 'em wet. Otherwise I used standard resistance 901's and dripped like crazy. I used the carto's exclusively for almost a year on my Silver Bullet.
  8. Dudeman

    Interesting news for modders and a question

    I'd be very interested in something like this depending on final specs and price.
  9. Dudeman

    juice eating cartomizers/clearomizers

    Get yourself some 3ml syringes to use for tubes and that won't happen. ;-)
  10. Dudeman

    Custom screwdriver question

    The easy answer is that the IMR or "high drain" batteries maintain that "fresh charged" battery feel a lot longer where the others drop in power at a faster rate. The higher mah may give you an extra hour of vape time, but a less enjoyable vape.
  11. Dudeman

    New Member. A son looking for a e-cig for dad to transition into.

    I wouldn't too crazy buying things until you know he'll like it and use it. A good site to poke around on. Electronic Cigarette Supplies & Electronic Cigarette Refills for Name-Brand Electronic Cigarettes! E-Cigs from LiteCigUSA They have a good selection of kits and plenty of liquids...
  12. Dudeman

    Which mod to get....please help

    While you'll get "more kick" from a mod, it won't last. As you use it, the voltage drops. Your eGo batt's are regulated to maintain the lower voltage until drained. That said, go with one of the 18650 devices as you'll get better "kick" for a longer period of time. I'd suggest the Silver...
  13. Dudeman

    A Quick intro and a question

    You can drip with it the way it is but ideally you want to remove the spike plate. It just pulls out. The problem is grabbing it. :/
  14. Dudeman

    Bulli A2-T

    Be sure to post after you try it. And that's a LOT of wick.
  15. Dudeman

    Bulli A2-T

    Wait until you try it with a lower resistance coil. ;)
  16. Dudeman

    Prodigy V 3.1 Having issue with 510 adapter burning out dual cores and overheating batteries

    I didn't have that problem but I swear the battery tube on mine was at least 1mm short. I had to use an o-ring between the switch and battery tube or it would contsantly fire using the "suggested" batteries. And no, there were no more washers to remove. I've since sold it. The button lock...
  17. Dudeman

    my first ever mod !!

    Did you know... With some very slight trimming, a MAP tank will fit inside one of those battery cases with an 18650. If you trim the access off the bottom of the atty connector and epoxy it to the bottom, it leaves just enough room to screw the MAP tank in there. All that sicks out is the...
  18. Dudeman

    Anyone have any experience modding with the A20 LED?

    The way the LED section of that flashlight is press fit in, you'll have to destroy the "guts" to get them out. Serious pounding or drilling will be the only way. It apprears to be pressed in throught the battery end. I purchased an A20 with the intention of a VV mod but after putting 7.4v...
  19. Dudeman

    316 stainless steel Genisis, no lathe

    I purchased 2 of these but haven't gotten around to playing with them yet. Pill Case Custom Made Stainless Steel | eBay The middle section is closed off from the bottom creating 2 chambers. The wall is about 1/32".
  20. Dudeman

    Use a cartomizer on a bottomfeeder?

    Your question is a little confusing. If you meant to ask if a carto can be used instead of an atty on a bottom feeder, the simple answer is yes. If it will feed depends on the bottom feeder and carto combination used. If you go with a bottom feeder, I'd suggest getting an atomizer for...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu