Search results

  1. Uno mas

    [CLOSED]

    There's a few ways peeps have done this with the IGO-S... 1.) Press out the center pin and cut a slot up to the wire hole with a small cut-off wheel. 2.) Drill the center pin thru, use the existing wire hole as the feed hole and secure the positive leg between the screw head and post top. 3.)...
  2. Uno mas

    The REO Lounge - Part IV

    Good mornin' Reo wielders :) Sent one of my precious woodies in to Ron for a look-over, didn't notice the signature required, hope it won't be an issue, failed attempt to deliver yesterday :(
  3. Uno mas

    The REO Lounge - Part IV

    I use 28awg in all my RDAs really a good compromise :)
  4. Uno mas

    e-smokeguru official thread

    Nothing on my tracking since Monday, really odd :(
  5. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    Yeah I need to finish polishing the IGO-S cap, didn't want to go too far till I got a chance to vape it after I converted it to a bottom feeder, hits almost as nice as my VA Cyclone(s) :) Funny thing is all my pictures have been taken with my old iPhone 4 :facepalm: So you are going to offer...
  6. Uno mas

    [CLOSED]

    Wow that's a classic! :D
  7. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    Amber tip topping a IGO-S on my Woodvil :)
  8. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    Checking the stock RH Nano tube (no rings) it measures .515 (13.081mm) long, hope this is what you are needing :)
  9. Uno mas

    The REO Lounge - Part IV

    Sometimes I actually put some thought into my greeting ;)
  10. Uno mas

    The REO Lounge - Part IV

    Happy TGIF Reo wielders :)
  11. Uno mas

    The REO Lounge - Part IV

    Can't help ya with the KFL, I do a vertical in mine, 28awg 10 wraps on a 16ga needle tip 1.3Ω :)
  12. Uno mas

    [CLOSED]

    Think I drilled thru the center post with a #55 (.052) and used a #0 combination drill & countersink for the feed holes, had to angle these to clear the lip and get below the wire hole...
  13. Uno mas

    The REO Lounge - Part IV

    So far I'm likin' 1.2Ω to 1.4Ω on mine, seems to be about perfect :) The only sub ohm I do is with my Patriots, same coils I build for my Reo's just 2 of them ;)
  14. Uno mas

    [CLOSED]

    For the Reo wielders on the thread :) A little surgery on a IGO-S, purdy tight gettin' the feed holes in there, this $12 atty with a wee bit of work is hittin' nicely... Just sumpthin' I wanted to play with ;)
  15. Uno mas

    The REO Lounge - Part IV

    A little surgery on a IGO-S, purdy tight gettin' the feed holes in there...
  16. Uno mas

    The REO Lounge - Part IV

    Good mornin' Reo wielders :) Moddin' a couple IGO-S's for backups this mornin' at work...
  17. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    Guess I ought to get ya a pic of your amber tip toppin' the VA Cyclone on my Woodvil :)
  18. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    I'm already at the smallest I am realistically able to push 50/50 juice thru :(
  19. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    Bottom feeding this thing has turned into a serious test of patience, gave up the last 2 times and top filled, seems the gap between the chimney tube and the inside step of the ring is so small that my needle tip will not fit far enough in to keep the juice from blowing back out the fill hole...
  20. Uno mas

    Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

    As promised... The texture of the rings are off a little, really needed to be finer media but as a favor/freebie I wasn't going to ask them to change it out. Still looks purdy decent though :) Havin' a couple issues of my own to work through with this set-up...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu