Search results

  1. Commie

    RM2 Wick & Coil Setups

    Besides satisfying curiosity? None that I noticed :)
  2. Commie

    RM2 Wick & Coil Setups

    Not at all, Bodkin. Not any harder than horizontal, assuming that you roll your coil on a solid object (syringe needle/toothpick/etc), and install it with the said object in place. Vertical coil will likely leave you with longer leads to the coil, but it shouldn't be a problem -- that shouldn't...
  3. Commie

    An Affordable RBA 2.0

    Don't send it to him no matter what. The things Jack does to atomizers are illegal in most states.
  4. Commie

    I've got VapeMail!

    Very nice! I'm contemplating one myself, just wish they moved the feeding hole lower, to make it harder to flood
  5. Commie

    Micro Coil for the RBA on your REO

    That is a sexy coil. Hard to believe it's your first attempt.
  6. Commie

    Another Nextel and Ecowool impression

    Yeah, the melting kind of scared me. I'll have to try it with the gas stove next. The blow torch might be too hot. That's the same blow torch that heats up stainless steel atomizers to glowing red in matter of seconds.
  7. Commie

    An Affordable RBA 2.0

    Strange. Mine doesn't fray. Did you heat it up before use?
  8. Commie

    Another Nextel and Ecowool impression

    I got a small chunk of both Nextel and Ecowool, and decided that there hasn't been a new thread about it in over 20 minutes :) I followed the advice of torching them, and I think I may have went a bit overboard with that. Propane blowtorch seems like overkill. Nextel did turn red from torching...
  9. Commie

    An Affordable RBA 2.0

    I always prefer bras with remote controls. Having just tried both ecowool and nextel, I'm fairly impressed. Still no idea how they will hold up, but, from what I understand, Russ, the point is to not have to replace the wick quite as often. I made my coils by sticking a syringe needle through...
  10. Commie

    Guess what came in the mail today

    Dirty lies!!! Where are the pictures? And congrats! :)
  11. Commie

    1st Day Using Nextel XC-116 (1/32") Ceramic Rope

    They measure it in a silly way. 1/32" is the internal diameter rather than external. Its original purpose is to serve as insulation for wires, so they mean that you can put a 1/32" thick wire through it.
  12. Commie

    Hello, beginner with some question about the Reomizer

    Not exactly, though I think I may have accidentally confused the issue. Here's what I was talking about: When creating an unoxidized SS wick, you wrap your fresh rolled untorched mesh into a shape of a wick, wrap your coil around it, and start pulsing your battery. It creates a very hot spot...
  13. Commie

    Bottom Feed for a noob?

    I can't speak about bogger boxes from personal experience (I use Reos), but I heard they're very well built. Learning curve -- yes, there is one. In the beginning, I found it extremely frustrating to use atomizers. I either flooded or dry hit them, so I used cartos. Cartos taste better on a...
  14. Commie

    Liquid feed for an old dripper?

    bogger box site has some modding parts for making one, such as pre-wired unsealed connectors, and feeding tubes.
  15. Commie

    Short stop and Panasonic battery

    Aaah, I'm having flashbacks to the '86 meltdown in Chernobyl
  16. Commie

    MODDING THE MOD- REO "re-do" (goosebox gets new feathers)

    I relinquish my mcgyvering crown! Very nice job! My AGA is not so bad, except it wants to stand upright, or it leaks. And the tank doesn't last long enough. But the vape itself is ok.
  17. Commie

    Which RBA for a Reo Grand

    Two reasons: 1. Some people (incuding myself) want to try new and freaky things. This gives them the right size extention to use on their Reos, at their own risk 2. Rob performs repairs on his mods. If you voided the warranty, Rob gets paid for this work :) And yep, 357 will work wonderfully...
  18. Commie

    Let's talk about the Vmod! Calling all Vmodders and those interested in the Vmod!

    RTDVapor sells 14500 battery carriers that fit 2 or 4 batteries. I found it very useful to throw a 4 battery holder in my pocket, with 2 batteries, bottle of juice, and spare carto/atty. They were under 2 bucks last I looked.
  19. Commie

    RM2 Wick & Coil Setups

    I twisted one side, and then, after coiling, twisted the other. Soldering would work at least as well, but I didn't have the patience for it :)
  20. Commie

    1st Day Using Nextel XC-116 (1/32") Ceramic Rope

    I got both ecowool and nextel from KidneyPuncher. It's a bit more expensive per foot than from the manufacturer, but you can buy smaller amounts, and don't have to wait for it to be shipped.