Search results

  1. Moxienator

    Closed/Sold (US) WTB Chels Ministick and D23mm Stick Extender

    Good ole fashioned bump Fortune favors the Bottom Feeders.
  2. Moxienator

    Anybody Using A Kabuki?

    Thanks Enaud! My kabuki is the only atomizer I have on a regulated device (ZNA). For the past 14 months, I've been mech only baby. Pekos and a REO mini 2.1 most of the time. In the beginning, I was so paranoid about running my batteries low, I was changing them constantly. It was once I...
  3. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Not "just to keep it working". To keep it running the way it should. I have been using Pekos for a while now. This is how I roll. I think what you're missing is that some people wanted less maintenance, so they asked for some advice on how. Hench the plethora of posts. Running as I do with...
  4. Moxienator

    Anybody Using A Kabuki?

    It's something you probably didn't pay attention to before, but you can tell when a wick is running dry. It's about how the vape changes that will be the biggest factor here. It will be hard to describe. If you are a mech user, try usin g the kabuki on a regulated mod. When you start to feel a...
  5. Moxienator

    Catfish Atty Mods the next Chapter

    Wow. That is Slick!!! Fortune favors the Bottom Feeders.
  6. Moxienator

    Printed Mechanical Bottom Feeder Mod

    I salute you! On my current ADV peko, after the first 4 months or so, I had to do a full overhaul. It was a mech, and I had only cleaned exposed parts as well. It just had no "oohmph" anymore. I couldn't seem to get it back without spending a night cleaning EVERY nook and cranny. I run that...
  7. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Wow. I'm still on 12mg, but switching to mostly unflavored when my CC comes in. Been rockin these Pekos with CAM Derringers at 0.7 with 12mg 50:50 nicoticket for quite some time. I plan to one day lower the nic again, but I'm not sure about Zero... Fortune favors the Bottom Feeders.
  8. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Using wires means less of this ^ on tiny parts. I clean once a month. I don't usually have the time to break down a mech peko and clean every little nut, tab, and bolt. For me, it just takes way too long. Doing the wire mod minimizes cleaning points, minimizes loosening of parts for those that...
  9. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Pekos in various states of undress. Fortune favors the Bottom Feeders.
  10. Moxienator

    Printed Mechanical Bottom Feeder Mod

    If you want 3 contacts, ditch the large tab and solder directly to the 510 brass lug. As far as I can tell, this will be the fewest moveable contact points you can make it with and still be able to take it apart. Don't forget: either way, the lug needs to be cleaned as well. Making a solid...
  11. Moxienator

    BF Mods by Custom-Classic

    I often wondered when something like this would come out. It's an interesting concept. Fortune favors the Bottom Feeders.
  12. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Oh, folks, don't forget to use LEAD-FREE solder and plenty of flux when doing these modifications. Also, be aware that overheating the battery contact spring while its attached to the sled may scorch or melt the sled. Fortune favors the Bottom Feeders.
  13. Moxienator

    Printed Mechanical Bottom Feeder Mod

    As a side note, if you set up all future Pekos this way, you can buy shell kits and source your own hardware as there are far fewer parts and vendors. Fortune favors the Bottom Feeders.
  14. Moxienator

    Printed Mechanical Bottom Feeder Mod

    If you wire it up in this way, it will have 3 basic sections. The positive wire and tab, which will stay attached to the sled because of the battery contact. The 510 assembly, which can be completely removed. The negative wire with a tab on one side and battery contact screw on the other...
  15. Moxienator

    Printed Mechanical Bottom Feeder Mod

    You could use either, but the smaller one's shape makes it easy to fit through the slot once it's all together and soldered. It also looks better because after it has been cut down and re-drilled, the tab's arm is roughly the same width as the wire, so it looks like it is supposed to be there...
  16. Moxienator

    Shortest practical Kayfun.

    The SOV cap mates up with the chamber barrel, eliminating the chimney piece. Nice piece of kit. I used one on my full size kfl+ by filing down the chimney for a slightly shorter, much lighter full size tank. Fortune favors the Bottom Feeders.
  17. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Yup. It was FORMERLY part of the switch. Now it's the positive contact. These guys are going from full mech to wired. Might as well cannibalize some parts, no? Fortune favors the Bottom Feeders.
  18. Moxienator

    BF Mods by Custom-Classic

    :mad: OH YEAH THANKS ROSSUM. :-x
  19. Moxienator

    BF Mods by Custom-Classic

    I'm with Ya, just thinkin' ahead my friend.
  20. Moxienator

    BF Mods by Custom-Classic

    STILL!?! ARGH!?! Fortune favors the Bottom Feeders.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu