Search results

  1. Moxienator

    Printed Mechanical Bottom Feeder Mod

    replace the connector. mine eventually snapped. See above post for site name and part number ( I think its a mouser part)
  2. Moxienator

    Printed Mechanical Bottom Feeder Mod

    RGLP(Peko)4Lyfe - I think they do volume discounts if you contact them. I got a bit off when I bought 3 at once...
  3. Moxienator

    Pictorial: *The VAPER V4* : a slim & sexy hybrid

    Took my v4 along with my 2 pekos down to S.Carolina for a weeks r&r. It was used heavily when I was around others (nonvapers) as I didn't want to put them off or showcase poor vapetiquette. It really shined with my 70vg30pg unflavored ( chosen so I don't have to re wick or dry burn often - or...
  4. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Finally! They weren't before I asked Justin. Awesome! Sent from my iPad using Tapatalk
  5. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Try contacting live wire directly. That's what I did. I don' need no steeeking kits...
  6. Moxienator

    Printed Mechanical Bottom Feeder Mod

    About to order 3 peko+ shells... My two 18650's have been running daily, but one is having some issues. I think its the shell. It's been dropped so many times it's not even funny. Both have been converted to full wire. The "upset" one is still going strong, but needs a tweak here and there.
  7. Moxienator

    Closed/Sold (CA) - Selling - Vaper v4 by Petar K (plus 6 batteries)

    Convo started Sent from my iPad using Tapatalk
  8. Moxienator

    Printed Mechanical Bottom Feeder Mod

    For the Adventurous, .015" brass seems to be a good starting point to cut one piece switch tabs out of. Sent from my iPad using Tapatalk
  9. Moxienator

    Gdeal Bottom Feeders (Tutorials/Parts List/Pictures) - Please take questions to the spec thread

    If anyone figures out the "light" switch spring part number before I do, please share it!
  10. Moxienator

    Gdeal Bottom Feeders (Tutorials/Parts List/Pictures) - Please take questions to the spec thread

    Some of the parts lists' links seem to be broken or obsolete. These are the actual part numbers with the exception of the "light" switch spring. GDeal Squonkers Complete Parts List 2x Stainless M2 Screws (GDNA) Mcmaster-Carr # 93395A141 2x M2 Brass Press Fit Inserts (GDNA)...
  11. Moxienator

    Curious how much juice other sub ohm vapers go through?

    I go through about 5-10ml a day (depending on the length of the day) on a derringer with dual tensioned 29's for 0.6 - 0.7R. I'm no flavor wizard, so I buy Nicoticket and cut it 50/50 with my own UFNB (1.2% nic, 7% Distilled Water, 91.8% VG). Two 60ml bottles + 120mls UFNB = about 6 or so weeks...
  12. Moxienator

    Vape Bunker

    Insane. I wholeheartedly support it.
  13. Moxienator

    Closed/Sold (CA) - Selling - Vaper v4 by Petar K (plus 6 batteries)

    Nothing specific. That's a great shot of a pristine deck. I'd really like to pull the trigger on this one, but timing is off. Grrr.....
  14. Moxienator

    Pictorial: *The VAPER V4* : a slim & sexy hybrid

    The original screw's surface area would be less than 19.6mm2 because of the slot and the chamfered edge of the head. Sorry! oh yeah, and that's a clip from a cheap screwdriver.... Sent from my iPad using Tapatalk
  15. Moxienator

    Pictorial: *The VAPER V4* : a slim & sexy hybrid

    Thanks Q! I'll be honest, this one sat on the sidelines for a bit while I vaped on my Peko's. I've been running two Derringers, each with dual tensioned 29ga 6/7 wraps, with 50% Nicoticket, 50% UFNB (1.2% nic, 91.8% vg, 7% h2o) for about 6 months solid. I decided I wanted to have some "lighter...
  16. Moxienator

    Closed/Sold (CA) - Selling - Vaper v4 by Petar K (plus 6 batteries)

    Can you post some pics of the deck?
  17. Moxienator

    Pictorial: *The VAPER V4* : a slim & sexy hybrid

    Just FYI: For those of you that would like to replace the small screw that connects the button together, it is an M3 thread. For those of you that would like a button with more surface area, a cut-down positive pin from a Fat Daddy Vapes' 510 "classic" works WONDERS. Pics will follow once I...
  18. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Wow. I'm shocked.
  19. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Agreed! That's crazy! Sent from my iPad using Tapatalk
  20. Moxienator

    Printed Mechanical Bottom Feeder Mod

    Curiously, after my last string of posts, the uneven wick drying has continued. I've tried everything. In my full mech peko, I replaced the 510 jack and vented screw (Threaded into the delrin this time!!!), steel wooled all three solder tabs and brass parts, scrubbed the threaded rod with a wire...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu