Search results

  1. Sonar505

    A simple mod for a Phoenix Rebuiklable

    Here is a mod to adjust the draw and the hole alignment without having to worry about mystery metals leeching to juice. Very easy to make with off the shelf equipment. 1 a phoenix clone and a esco E1 clearomizer tank and screw on driptip holder. Do not even need a drill just hold bit in hand and...
  2. Sonar505

    How to build a 3.7v wood mod.

    A FF Knox class my first, out of San Diego never made it to Norfolk but brother was on a boomer out of there.
  3. Sonar505

    How to build a 3.7v wood mod.

    Skimmer who liked to find bubbleheads.
  4. Sonar505

    A Tutorial for a DIY VV Dual 18650 Wood Mod

    Here is the way I wired the pot ---- center pin of 200 ohm pot----one leg of 200 ohm resistor------other leg of 200 ohm resistor ----- to pin 5 of regulator. Side leg of 200 ohm pot to neg/ground connections. Should adjust between 3.3v to 6.5 approximately not sure whats different on...
  5. Sonar505

    How to build a 3.7v wood mod.

    Not to long ago I attempted a similar thing it seemed to work pretty well. A couple of things different tho more of my tank showing outside of the box so you might try addiing a 510 to 510 short extentder. and I was using a 5mm fast changing LED. Here is what I was getting in normal room light...
  6. Sonar505

    Too Ugly to let live or Too Cute to kill?

    I made this a few days ago from extra parts I had lying around. Works great. But I really can't decide If I like the way it looks or not. So I need your help based on the title which way do you prefer. Here it is. Some additional info It's VV using a OKR-T 3 amp, tac switch with...
  7. Sonar505

    A Tutorial for a DIY VV Dual 18650 Wood Mod

    A Tutorial for a DIY VV Dual 18650 Wood Mod As promised. Here is a tutorial for building a VV wood mod. Using a OKR-T 6 amp switching regulator, Voltage display and dual 18650 batteries. This one is highlighting the differences from the other tutorial I posted before. So If you have not read it...
  8. Sonar505

    How to build a 3.7v wood mod.

    Love the changes you made nice recessed tank. Yea the green one isn't very bright but you might try the 3mm bright blue one it's a lot brighter. Great job. Thanks for posting.
  9. Sonar505

    My Latest A V V Dual 18650 Wood Mod

    Hey thanks for your answer. Luckily for me when I got the 6 amp I also picked up a 3 amp for another mod I am currently building so can test first hand.
  10. Sonar505

    My Latest A V V Dual 18650 Wood Mod

    Thank you very much coming from you a High compliment indeed!
  11. Sonar505

    My Latest A V V Dual 18650 Wood Mod

    Here is one I finished yesterday. Tested for 24 Hours works fantastically. Used a OKR-T 6A regulator (Thank you to bstedh for a nice diagram and great thread he posted) My first Switching Reg. Which reminds me I have a question for anyone. I have another dual 18650 mod using MadVapes Regulator...
  12. Sonar505

    My first VV mod

    Great job! Very nice for a first mod, most first mods look like spaghetti inside but not yours very clean looking. Also pretty smart to recess your tank a lot more pocket friendly. If you don't mind me asking where did you get your PTN04050c from, buy it or sample from TI - if sample when and...
  13. Sonar505

    The Little Beast: Vivi Nova, raidy style, cotton over wick marriage made in heaven

    Yes please by all means post a how to. Looks great.
  14. Sonar505

    How to build a 3.7v wood mod.

    Thank you. The only wood working experience I have is trial and error for the last 4 months. I love the way wood mods look but my pocketbook kept saying no go. So I jumped in with both feet researched ecf and made (2) wood mods. A gigantic one with as many bells and whistles as I could afford...
  15. Sonar505

    Can you still order free samples from TI?

    TI = Texas Instruments apparently they have a program where you can order part samples before you buy (except now for certain parts) the chips I was trying to order are for VV mods.
  16. Sonar505

    How to build a 3.7v wood mod.

    yes you can use those but it will be a little bit harder to position and glue them down so that the positive button lines up with the positive button on the battery and the negative spring sits in the middle of negative side of the battery also make sure they are secure or even braced below so...
  17. Sonar505

    Can you still order free samples from TI?

    As I stated in the first post I have never before ordered a sample from TI so I don't see how I could be taking advantage of It.
  18. Sonar505

    Any Interest in a photo Tutorial on how to build a easy and cheap wood mod?

    For those of you who haven't seen it here is a link to the first tutorial. http://www.e-cigarette-forum.com/forum/modding-forum/341949-how-build-3-7v-wood-mod.html
  19. Sonar505

    How to build a 3.7v wood mod.

    wow that came out great! Love the look of your switch makes me wish I hadn't gotten rid of my old PC's. glad to here how you re purposed parts from many sources it reminded me of my first mod which still works great and that I should keep looking around the house for my own parts so thanks...
  20. Sonar505

    How to build a 3.7v wood mod.

    Wow! Thanks but i think I will stick with Sonar505 for now.;)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu