Search results

  1. bloodless2010

    Best batteries for capacity?

    Currently looking for the best 18650 batteries in terms of capacity, preferably tested ones with confirmed mAh. I'm vaping on a 0.3 ohm build at around 50W so as-long as the batteries are 20A I should be good there, much appreciated everyone :)
  2. bloodless2010

    eliquid tasting stale

    A bit of an odd one here, I guess I'm not the only one here with multiple tanks, because hey, who doesn't? My ADV is a Goblin RTA, which works wonderfully, I have an iSub G which I use from time to time, I filled it up with some of my DIY skittles eliquid (vapours-r-us flavouring), and...
  3. bloodless2010

    *FIXED*Ohms increasing..

    Okay so I understand that with loose connections the ohm readings may be wrong or fluctuate a bit, but this is an odd problem I'm having, i'm using the iPV3 Li, with the goblin RTA, I have a dual coil in there that fires perfectly fine, but I'm having an odd problem, the resistance increases...
  4. bloodless2010

    [UK] Pioneer4You iPV 3 Li

    I'm looking for a place to get a iPV 3 Li, only problem is the prices I can't find a good reputable vendor and wanted to know where you guys got yours from or if you have seen it, would appreciate a few links if possible (for variation - the price seems to fluctuate a lot) Thanks!
  5. bloodless2010

    Just had one of those dumb moments

    I was refilling my goblin RTA and took it apart to clean it first, when I assembled most of it, I decided to fill the juice straight into the tank section (basically fully assembled but without the top part) because the bottom filling on the goblin RTA is a pain, the pressure from squeezing the...
  6. bloodless2010

    (NEW) Kanger NEBOX - Temperature Control, Single 18650, Ni200/SSOCC, All in one device

    Just found out about a new Kangertech product in pre-order, I'm not sure how I feel about this personally.. http://www.kangeronline.com/products/kanger-nebox-white-starter-kit There's quite a few selection of colours, personally I like the white one the most. What do you guys think? Here's a...
  7. bloodless2010

    Direct Contact Question

    So I know some mech mods use direct contact, so the atomizer is directly connecting to the battery. I have a question regarding my first mech mod I plan on buying: https://www.fasttech.com/product/3476800 (Yeah I'm buying a cheap clone - I don't know if I'm going to enjoy using a mechmod yet so...
  8. bloodless2010

    First mech mod

    Hey! I plan on jumping into the scene of mechanical mods. First time, I understand ohms law etc and a decent amount of battery safety. I plan on getting a Tugboat V2 (clone - I don't want to pay upwards of 100$ for something I might not even enjoy using) and I plan on getting some genuine Aspire...
  9. bloodless2010

    First mech mod

    So I saw the tugboat V2 and I wanted it. You guys probably know the feeling, shinyitis. I've been wanting a RDA and mechanical mod setup for a little while, mainly just because of simplicity, something that works nice and looks nice too. Well the tugboat V2 is just that, I noticed it was really...
  10. bloodless2010

    Nic-ups

    So yeah, I've done a bit of research into nicotine hicups, or as I like to call them Nic-ups. But the thing is, everyone is saying that these nic-ups are to do with nicotine OD early presymptoms or too much nicotine intake. Thing is I get these sometimes on my first drag on my vape, most of the...
  11. bloodless2010

    What should I upgrade to?

    I've finally decided to contemplate an upgrade. I've been using my current device for awhile and I'm craving more clouds (is that a thing?) I currently have a 20w iStick (Yeah I know!) I want something more powerful. I have a kangertech aerotank with a protank dual coil I built reading at 1.4...
  12. bloodless2010

    Wireless vape charging

    First of all, sorry if this is in the wrong section. Came across this XCSOURCE Universal QI Wireless Charging Receiver film for micro-USB Android Mobile BC318:Amazon.co.uk:Electronics on Amazon, basically you plug it into a micro usb connection and it allows you to use wireless charging Now I'm...
  13. bloodless2010

    Vapers Tongue

    So I'm beginning to suspect I have vapers tongue, me and my friends (2 other vapers) all puff on my own DIY ejuice (I'm so kind, right? :)) It's a really nice flavour, but on all 3 (Mine and my 2 friends) vapes, I couldn't taste my beautiful creation much :( The past week or so it has been...
  14. bloodless2010

    [Unreleased] Calculator I made :)

    So I'm a self-taught developer, and recently got into DIY ejuice, thought I'd put my developer skills and DIY knowledge to make a little tool, which I plan on releasing in future. It's currently in early development, I'm trying to be original as possible and avoiding looking at other calculators...
  15. bloodless2010

    Harsh throat hit

    So this morning I whipped up a batch of some skittles ejuice (tastes amazing) but I have a little problem, the throat hit is quite high.. I'm using 75% VG, 25% PG, so the PG isn't a problem (I think?), and I only used a target strength of 12mg. I only made a batch of 30ml, (I've made this...
  16. bloodless2010

    How many ml can I make?

    Okay, so I plan on making some eliquid, 75VG/25PG, 10% flavour, and 12mg nicotine. I plan on purchasing the following nicotine: 72mg/ml Liquid Nicotine in VG for use in E-Liquids & E-Liquid DIY - The Purest Available, UK Made I'm wondering how many ml this nicotine can make, assuming there is...
  17. bloodless2010

    So I built my first dual coil head..

    Okay so I wanted to get into rebuilding coil heads as I can't be bothered waiting for them to arrive.. Plus it's far cheaper and I can make loads with the amount of kanthal I have. I made a few single coils first of all to test it out, going pretty good, roughly 10/11 wraps of 30AWG Kanthal...
  18. bloodless2010

    Why is silica even used?

    So as we know silica wick is used for all standard coil heads/tanks that are on the market (Except some newer OCC coils that are being released) but this raised a question for me, why did we even used silica in the first place? As we all know silica is quite dangerous and I'm not 100% sure...
  19. bloodless2010

    Can I just add flavouring to this?

    Okay so when searching around for a nicotine base to add to my 0mg nicotine ejuice.. I came across this website.. Offers 50/50 (VG/PG) 100ml of 12mg nicotine eliquid, unflavoured, for only £5.40? Diamond Crystal VPG 12mg Am I reading this wrong or is that literally purely a base and all I need...
  20. bloodless2010

    Adding nicotine to 0mg eliquid

    So a few month ago I made a batch of Skittles ejuice, and it tastes really, really nice. The only problem is I don't really enjoy vaping 0mg ejuice, I enjoy my nicotine. I normally vape 11mg ejuice, I have 5 10ml bottles of this Skittles ejuice and I'm wondering if I can buy nicotine and add it...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu