Search results

  1. warp1900

    After the vapor cleared, I can now tell all

    It has been days since we have seen the situation evolve form the cold heat soldering iron, to the Weller that Hangtime modded and posted a video for. I was disappointed to find out that Hangtime had to mod the BP860MP because the RCA jack type connector turned out to be bigger than a standard...
  2. warp1900

    Another one for the ladies.

    This is the second one for the vape and vibe series, http://www.e-cigarette-forum.com/forum/modders-forum/29748-results-another-conversation-vape-vibe.html, this time a pink enclosure. Great thing about this box is it allows for 2 X 14500 with a regulator at 5v or a 2 X 14500 in parallel to...
  3. warp1900

    Following the trends, my take on the laser penstyle

    Since this have become the craze, I had to do my take on it. Credit goes to Cisco (a.k.a.the mini PV mod god), for his never ending stream of handsome looking mods. This was a personal challenge to find out if I could make any small mods. Anyway this is a "one of a kind" for me since, I'm...
  4. warp1900

    hELi-VapeR take 2, a mod that can "swing"

    After the HELI-VAPER, the obvious thing was to make the mini heli-vaper. No, not hell a' vapor..., HELI-VAPER. For those that never saw the original hELi-VapeR, here is a video... http://www.e-cigarette-forum.com/forum/modders-forum/28026-my-new-mod-video-heli-vaper.html This one runs on...
  5. warp1900

    The needle that can save you a lot of work/headaches.

    I will add this to the PVMA thread later for more reference. For those making their own adapters,(regular or RCA) this will come handy and will make them much more reliable because you will not need to use soldering or wires. sports ball inflation needle. It fits tight in the...
  6. warp1900

    The frother mod project.

    In my never ending search for battery cases/holders I found this $2.99 Milk/Coffee frother and I thought it might make a cool mod. It is made out of some kind of rubberized plastic that feels great and provides a good grip. BTW the thing really works great for what it was designed, believe it...
  7. warp1900

    I found this website with amazing stuff, but...

    Unfortunately the sizes are not workable for us, Does anyone know of a place that does the same but is smaller size? All these seem to be 2 inches OD (diameter), and we need something around 1/2 to 1 inch, they have caps, reducers, converters and they even come with pre-drilled switch...
  8. warp1900

    Tiny 510-901 battery

    I normally vape at home out of my 4.5v wall wart and pass-through or one of my many battery mods, but when I go out I prefer to keep it a little more "discreet", and using the factory batteries for 901 and 510 is just silly because they last me about 20-30 minutes at most. So I build myself an...
  9. warp1900

    Who has a GOOD Battery charger?

    My charger has been putting around 5.45 to 5.7 volts into my batteries and the charges are lasting less than they used to, I mean about half the working time. This is the one I got from DX, works great, but maybe not so great after all? DealExtreme: $8.81 TrustFire All-in-One Charger (for...
  10. warp1900

    Mod of a mod??

    This are 2 of my mods of a mod. I have purchased several commercial mods and in general they turned out to be pretty reliable and/or well designed. This is NOT a review, but i need to explain the reasons why they don't work. In this case, i had 2 pass-throughs sitting in a box for a while and...
    • warp1900
    • Thread
    • brand commercial pass pass-through rca
    • Replies: 12
    • Forum: Battery Mods
  11. warp1900

    NEXT challenge to master the "sweet spot"

    I know i saw something about this long ago in the forum, i can't find it anymore for some reason. potentiometers I already did a few attempts at this but since i was basically shooting in the dark. So...Has anyone tried to use a potentiometer to regulate the power fed to the atomizer? Is it...
  12. warp1900

    Very Quick and easy adjustable draw mod for 901

    Here is an idea inspired by forcedfuel's video i just watched about the adjustable draw for 801 on his super T. I just used one of the covers that come with 901 cartridges, cut the end off it with an x-acto knife and punched a hole in it. Slide the ring on the 901 atomizer and voila! You can...
  13. warp1900

    MYTHS and FACTS about Batteries + mods

    MYTHS and FACTS about Batteries + mods OK, i have been a reader in this forum and obviously will never be able to put up with so many threads, but i have in 3-4 months gone through pretty much each one of them only in the modders forum which obviously is my favorite. I have also...
  14. warp1900

    A challenge for the mod experts ;)

    So here is a challenge for the mod "experts"... I purchased this little 4.5V wall wart from Radio Sharks and did my usual mod to it, so i cut off the cable and added an RCA connector to it so it would be compatible with my pass-through mods. So the setup is wall wart to my RCA pass-through...
  15. warp1900

    Results of another conversation...Vape and Vibe!

    Since we talked about this option in another thread... http://www.e-cigarette-forum.com/forum/modders-forum/29189-how-about-510-mod-women.html Here is my take on it and it just took me a couple of minutes to do it thanks to the RCA PVMA system of connectors i am using. Vape and Vibe! :evil...
  16. warp1900

    Nice looking box MOD

    Although i payed $23 for this USB power pack/ LED Torch, all i really wanted was the box, perfect size, fits one 18650 2,500 mAh battery, so i gutted it and that is what i did. I still have to add a cover to the front so it just shows only the hole where the atty fits in. I used my RCA system to...
    • warp1900
    • Thread
    • 18650 box mod long lasting power supply rca usb
    • Replies: 22
    • Forum: Battery Mods
  17. warp1900

    HOW-TO BIG battery in a box? the bubblegum MOD

    So here i am standing in line at the grocery store and i keep looking at those nice altoids boxes. Always wanted to do a mod on a box but using a 18650 battery, the biggest of all for us vapers. The big altoids box is not a good fit for the hand, so i keep looking. This is the result... The...
  18. warp1900

    MY NEW MOD + video - The hELi-vaPer !!

    This one is dedicated to all modders in this forum, for all the hundreds of ideas and the support. This is my most polished design yet thanks to all of you. I have no idea why the video shows under my avatar lol.
  19. warp1900

    Dual atomizer monster with many options

    By now , i know some here are already sick of me going over this a million times. More goodies and options for the RCA PVMA system First pics are with a pass through, the others with a nickostick running on one 18500 battery, all plugged on RCA audio jacks and connectors. I can also run this...
  20. warp1900

    Easiest way to remove 901 battery connectors

    This is my method of destruction so to speak: I have extracted battery connectors form 801, 901, 401 and also what think it is a 104? I have read many threads and comments about how hard it is, i guess i have been lucky, not that it is easy, but i have pulled those suckers out without having to...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu