Shapeways mounts arrived and passed all tests! All mounts are now out of beta everywhere :)
Fitting hints and tips:
I recommend Size0 1.5mm thread self tapping stainless screws of approx 6-7mm length for mounting the board - there will be no issues with screw head overhang with...
I used this fire switch
- I wanted something that looked a little bit posher - but when you go down to smaller diameter push buttons it's hard to get nice posh looking switches at the smaller diameters - I settled for this for the time being.. just drilled out the cana hole and burred it with...
yup it's a spring loaded OCd from stealth vapes - lovely connector but long
yes a MSW1201 will fit - you'll have to offset the mount hole just a little bit downwards and cut off some of the solder tails to accommodate the OCD - it's a little tight but it will go in there :)
Okelly Dokelly!
Got this tester mod finished: -
used a custom switch for the fire button - not the exact one I wanted but it will suffice - wanted something with space in the enclosure.
Used silicone wire for the wattage adjustments and fire button. little bit thicker on the insulation-but a...
excellent news - so you think I can take the shapeways one out of beta? - Still haven't received mine from them yet after they fudged up the first print run :(
well they may "look" poor - but if you take the time you can make them look tidy and neat - either way it's going to look a helluva lot better than the hot glued setups that currently abound ;)
If you use 0.25mm silicone wire then you will have lots of flexibility and there's plenty of room in...
I've got a few questions regarding the screen fixing - The cradle was designed so that the base would be fitted against the body of the mod and there would be a slot to accommodate the screen.
With regards to the Hana style enclosure - it's not that simple - and the kit comes with a piece of...
The size recommended by Evolv - M1.6mm
the screen slides into a slot on the underside - it is not held securely in place by the cradle - it is designed to be held in place against the body of the mod - However with the Hana style enclosure kit and usually with most modders a small piece of...
Success! - Sculpteo mount arrived this morning and it's a perfect fit - impressed with the print quality and tolerances from Sculpteo. They are the cheaper option for shipping for anyone in the UK or Europe. This design will be coming out of Beta this evening.
Here is preliminary testing of...
Let me put it like this - I love my rebuildables - would never be without one - but I ordered one of these for the missus as soon as Joyetech UK had them.
I was that impressed with it - I ordered one for myself the very next day.
It is now my vape device of choice whenever I Leave the...
Let me put it like this - I love my rebuildables - would never be without one - but I ordered one of these for the missus as soon as Joyetech UK had them.
I was that impressed with it - I ordered one for myself the very next day.
It is now my vape device of choice whenever I Leave the house -...
I've just uploaded a design for a DNA 40 chip mount to Sculpteo and Shapeways - I haven't received one myself yet to test fit it - just giving you guys a heads up on its existence for the moment...
It's designed primarily for a C/Hana styled enclosure but could be used in any suitable enclosure...
aside from the one who seems to think I have devious underhand motives - the responses are making interesting reading..
Like some have pointed out I'm just trying to determine IF there is a link between vaping and weight gain IF there is no other obvious cause INCLUDING having had tests and...
Hi all
I'm conducting this research on various forums I'd like input if you have noticed the following..
If you have experienced unexplained weight gain that is NOT the result of bad eating habits or lack of exercise - i.e. the only thing that changed in your lifestyle is that you quit...
cheers for finding that fuse in stock - I will have to think long and hard on whether I will get them though as Digikey also have a flat rate of shipping policy of £12 GBP which means two fuses will set me back £16 / $28 dollars roughly -
factored into the total cost - it's not an...
well that's going to hold me up and possibly write off this project for me - I've looked everywhere and aside from mouser can't find these fuses anywhere but there - and they are not expecting them in until the end of October..
Plus with their set rate of £12.000 GBP for shipping - just two of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.