Tools required:
1 x Tweezers
1 x Nail clippers
1 x Philips screwdriver or needle nose pliers (Depending on whether you have nuts or the new v3 kit with screws)
1 x Blowtorch or Lighter
1 x Paperclip or Pin
1 x Spheroid fork or a pair of needle nose pliers
1 x Ruler
1 x Scissors
1 x 0.2 Kanthal...
This guide is based on building a Kanger head which are used in Protanks/Evods/Davides etc etc
Tools i use for making the coil:
1 x 2mm jewellers screwdriver
1 x Nail Clippers
1 x Flat nose tweezers
1 x Pin point tweezers
1 x Pliers
1 x 14 gauge Blunt Needle
1 x 0.25 Kanthal
1 x Blowtorch...
Tools required:
1 x 1mm flat head screwdriver ( i use this for making adjustments to the coil)
1 x Tweezers (for holding the wick when torching)
1 x Nail clippers (for cutting the wick)
1 x Blowtorch or Lighter (for torching the wick)
1 x Res/Non res wire of your chosen resistance
1 x 2mm...
Tools required:
1 x Tweezers (for coil)
1 x Nail clippers (for cutting wire and cotton)
1 x Scissors (for cutting the Jewel Filter to size)
1 x Ruler (for measuring the Juwel Filter)
1 x Philips screwdriver or needle nose pliers (Depending on whether you have nuts or the new v3 kit with screws)...
Tools required:
1 x Flat nose tweezers
1 x Nail clippers
1 x Philips screwdriver
1 x Blowtorch or Lighter
1 x Mandrel or a 2mm thick drill bit
1 x 14 Gauge needle
1 x 5ml syringe fitted with a 18G Green Luer Lock taper tip or you can use a 20ml Oval Luer Lock bottle, cap & tip
1 x 0.25 Kanthal...
Been using this method since yesterday and it's working great:
Tools required:
1 x Tweezers (for coil)
1 x Nail clippers (for cutting wire and cotton)
1 x Scissors (for cutting the Jewel Filter to size)
1 x Ruler (for measuring the Juwel Filter)
1 x Philips screwdriver or needle nose...
Will do, i do like trying all different versions what others do, also looking into doing a microcoil/cotton build.....was thinking of wrapping the cotton legs around some non res wire for stability so the cotton does not droop down.
Loads of guides out there but i thought share this guide i made up:
Tools required:
1 x Tweezers
1 x Nail clippers
1 x Philips screwdriver or needle nose pliers (Depending on whether you have nuts or the new v3 kit with screws)
1 x Blowtorch or Lighter
1 x Paperclip or Pin
1 x...
Just something i made up, it's not microcoil/cotton or anything just a very basic guide that works for me, anyway here it goes fingers crossed the pictures come out ok.
Hope it helps some out there.......
Tools required:
1 x 1mm flat head screwdriver ( i use this for making adjustments...
Ignore the above post, finally found it from billie's post:
"We made a 0,2mm gap for the NR wire to fit on the center pole.That's the room we could spare"
Quick question as i cannot seem to find it, what maximum non res wire can the Sophia take in size/thickness without having problems with pushing the ceramic down?
This may sound silly but i do love Brushed steel finish and was wondering if i was to use Micromesh (I use this on a lot of my stuff) on the Sophia to give it that Brushed steel look would it effect any leakage as i am taking the plating off, also would it remove the logo?
I use Grade 2400...
Thought i would give another heads up to my problems i had before, think the reason for the VG was because i used 100% VG base and did not dilute it (was that the cause i don't know, more than likely was)
But what i do know is that if i use 50/50 with diluted vg it is fine so i can still vape...
Was vaping Red Astaire by T-Juice (Very popular juice in the UK), i had two versions, one in 70pg/30vg and one in 50pg/50vg, when using the 70pg/30vg version i have no problems at all, when using the 50pg/50vg after about 30mins i could feel myself getting breathless and it lasted for hours...
Forgot to add, re-coiled it with my own made zapped res/non res wires making a Microcoil/Cotton and OMG, somebody would have to kill me to get this Sophia prized from my hands, it's working fantasic:vapor:
Gotta feeling another Sophia is gonna be added to basket soon:D
Thanks for the tips Jojobo:toast:, i can confirm though that my breathlessness was due to the high amount of VG i was using, normally use 70pg/30vg but tried 50/50 so no more 50/50 for me anymore, gonna stick with 70pg/30vg:)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.