Search results

I managed to order 2 of the nuts from esmokeguru for the original Odysseus and they fit perfect and look like they're made from a better material so it's sorted lol

Sorry to bomb the thread, just wondering the little knurled positive nut that traps the positive wire under the ceramic housing has stripped on my term after only 2 months. Does anyone know of anything I can replace it with without having to buy the whole ceramic assembly? Like a ss nut size or...

So I've had my v2 for a few months now and the tiny knurled nut that you trap the positive wire with under the ceramic assembly has stripped. Anyone know where I can get a replacement without buying the whole cup assembly? Or even better the size and inner diameter so I could buy a more hard...

I'm in the UK, placed an order with j wraps, paid standard shipping and my order was at my door in 7 days. Couldn't believe it.

From the pictures the guy put up it looks frosted matte not brushed, don't know if I can post a link to pov forum but if you search Google for vaporbreak Russian it's one of the first results :-)

Also found out non of these manufacturers are responsible for the brass, it was another manufacturer doing a clone of a clone of a clone and cutting corners lol

Vape for me every time! Just spoken to some guys at pov who have the one from vb and they scratched the hell out of the positive post and no brass so all is good. I like the eh pros, rainbow heaven are also right up there quality wise. I love their terminator v2 oddy clone, vapes like a charm...

Apparently the fasttech one isn't tobeco they're just using tobeco picture according to the forums. I hope eh pro aren't the manufacturers parading coated brass as ss. I should've just saved and bought the real thing lol

I've ordered this and was wondering the same. Also I'd like to know which manufacturer it is as fasttech has had problems with their clones saying that are solid ss but they have chrome plated brass positive posts which I'm not going to be using if that's the case

The pro.tank and evod heads do not fit the aro but the t3s ones do, the collar is smaller on the t3s heads, I've been using authentic t3s heads in my aros for months

I've done 3 as micro coils on an 18 gauge needle with cotton wick and cotton on top, 1 horizontal micro coil and padded round it with cotton but this seems too much trouble and the regular micros work really well. Also done one with a 1.5mm machine screw coil with cotton and cotton on top and...

Crazy, I've got 4 all recoiled with cotton and haven't had a single leak on any, even with the stock heads. I bought a load for my mates and zero leaks with theirs either. Is it the heads or the actual tank that leaks?

I personally have had no problems with the Pyrex aro, most people on here SRate them well from what I've seen. What problems have you encountered?

So I got a dbox puritank from ft today. Cleaned it out stuck a head in primed, filled waited vaped. Horrible burnt rubbery taste, so I removed the flavour wicks, same problem. Put 3 different protank and t3s heads in that I'm currently using on other tanks, same horrible taste. Put in heads that...

If you want Pyrex in the form of the t3s the smok aro Pyrex is the one. Also takes t3s heads :-)

I've told this to my gf several times lol she's learning now though. They're great little clearos, I rebuild with micro coil and cotton when the heads are spent and they are fantastic. I don't buy anything unless it's glass anymore :-)

Just a shot in the dark, are you using a kanger clearomizer or tank or any bottom coil. If so check the atomizer head near the rubber grommet to make sure no wire from the legs are sticking out. If so push it back under the rubber or clip it off. This usually causes a short as the wire makes...

Is the coil too tight around the ekowool?make sure your not strangling the wick as it's hollow, it should be able to move through the coil snugly. Also are the wraps on your coil close together and evenly spaced this was my biggest problem when I started making coils. Also have you tried using...

They look like the gs h2's that have been around for a while. Only thing that puts me off with these things is plastic. I only buy glass clearos and tanks now as the flavour seems better for me at least :-)

Yeah like you say, if you saturate the wick before firing then you won't have any problems. Some people like to dry fire the coil before wetting to make sure the coil glows evenly and this is where the grommet burns if you don't use no resistance legs or double the legs over and twist.