Search results

I just bought an authentic Hades and have over a dozen Rda s and I use many with it. The problem I'm having is the Hades 26650 battery is really loose in the mod when everything is locked down. When I use my Cerberus rda in hybrid the Cerberus pin doesn't come close to reaching the battery...

I have a new auth Hades mod and Cerberus RDA. My center post was spinning, figured out If I tighten down the parts near the bottom contact pin on the rda it stays in place. The problem is when I do this my Hades mod won't make contact with the cerberus because the battery doesn't come close...

I only use mechanicals and RDAs. Just got my Mephisto RDA in the mail. I've heard reviewers talk about how much "22g wire" it can fit. I have used everything from 22g-32g kanthal wire. 28g is what I use the most. I most often use dual/triple strand 28g wire dual coil builds. It heats up fast...

MNKE 3500maH falt top Maximum Continuous Discharging Current: 20 A Maximum Pulse Discharging Current: 60 A I ordered a bunch fo the MNKEs 26650s (the sonys are impossible to find)), What is pulse discharging current? How do i know when I am vaping on the pulse discharge current and not the...

I have 3 helios devices. 1 authentic, 2 clones (EHPRO and HCIGAR). The EHPRO and HCIGAR have center positive posts that rotate side to side but are still functional. I'm trying to figure out a way to get these posts secured to stop twisting. I've been looking at different adhesives, and want...

I owned an authentic helios that I accidentally fired for a few minutes, fried the insulator around the center positive post. Bought an EHPRO and an HCIGAR Helios clones as replacements. Nothing but problems... The EHPRO helios doesn't have an adjustable contact pin, but the insulators are in...

I have an innovapes silencer pyrex drip tip. The bottom is brass, and a pyrex piece fits onto the brass. Innovape Silencer Pyrex Drip Tip Mine has come apart, the pyrex top came off the bottom brass piece. I can still fit it into the brass and it wiggles but its usable, just unsteady and comes...

I have a dual coil running in a helios and the coils have seen about 2 weeks of use right now. I just sat on my mod and it fired for about a minute and a half straight, ate through the cotton, needed to be rewicked, some new orings, but the insulator looks fine. Now it seems my coils heat up...

I understand atomizer and battery safety very well. I understand ohms law very well. I apply this knowledge to my builds. I have gotten into sub ohm vaping with my authentic Helios/Stingray combination. I use Sony VTC4/VTC5 batteries, some of the best batteries you can buy for high amp...

Lost my aqua 510 pin. I only need that part. Can anybody help me on this one? thanks

I bought a fairly decent multimeter, a Mastech AC/DC Auto/Manual Range Digital Multimeter. http://www.amazon.com/gp/product/B000JQ4O2U/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1 When I test the resistance on any of my atomizers (RBAs, RDAs) the ohm reading fluctuates up and down by a significant...

I recently purchased a Stingray and the very bottom cap that you press to fire the mod jiggles side to side. Is this how all of these Stingrays are made? Is there a fix for this? Holding the mod upright I can jiggle the bottom cap and there is a lot of movement going on...

I bought an authentic helios recently. Love the device, only problem is trying to get the top cap off. It is impossible to remove with my hands. What is the best method to get it off? I would consider threading it into my device and then pulling hard on the top cap, but am worried that will...

Went to my local vape shop and there is a guy who works there that is experienced at making killer coils. I purchased an authentic Helios and asked him to throw a quad coil build on there. From above it looks like two coils, one on each side, but I believe he used two strands of kanthal per...

I have an aqua right now and only bought it because it runs hybrid with my aqua. I have a few kayfuns and a Helios as well. I'm not happy with the origin and want to replace it with something sturdier and less finicky. What mech clone should I pick up that is well made and all around a good...

I lost the white bottom Origin mod delrin cap. Is it essential to have this part in the device? Does anyone have any idea where I can buy a replacement for just this part? I've looked a little bit and I've only found origin mods for sale not any individual parts or part kits

I have an origin mech with a top piece that has 510 threading and a non adjustable pin that reaches up towards the internal 510 threading. I just bought a gold helios authentic RDA that is not making contact with the mech mod. It will screw down fully, but no contact is being made between the...

I'm using a mech Origin mod and it is a 21mm device. I want to buy an RDA (clone), and want to see what the hype is all about with drippers as far as vapor clouds and taste. I have an Aqua RBA that has been drilled and it works excellent, I like an airy draw and wan't an RDA that I wouldn't have...

This thing hits like a dripper with dual coil sub ohm builds. Huge clouds of vapor and fantastic flavor, very satisfying. Using it in hybrid on an Origin mech. BEFORE AFTER Side air holes..... BEFORE AFTER And finally widened insulator grooves

I purchased an EHpro Kayfun 3.1 about 5 months ago from this website: EHPro Kayfun 3.1 I always ran it with the airflow control screw removed from the device leaving airflow wide open. I had best results with this. I just ordered a KFL+ ehpro clone from eciggity.com that advertises a larger air...