Search results

C

Mine will have condensation using Clapton coils, since they take longer to cool down after a draw. The only way I've found to get around it is to keep drawing for about 1-2 seconds after I let off the fire button.

If you like Butter Rum,you might like this simple mix! Butter Rum (LA) 6% Marshmellow (Cap) 2% Egg Nog (Cap) 1% EM or Sweetner 1% Adjust to taste!

I rebuilt mine last night using 24ga 316L stainless. I made the coil 3mm,with 6 wraps = 0.30 ohms. Running it in temp control @ 400F and very little condensation,if any. My juice is (70vg/30pg) and wicks like a champ,plus great flavor. I think I have found the magic build for my SMM!:) My...

Mine will condense also reguardless of wick diamenter! I use fused clapton coils in it,and if I remember to keep drawing after letting off the fire button,everything is fine. I think a smaller coil (maybe ss spaced) might help relieve the problem,using temp control,as the fused clapton's do...

I've had mine for a week now. I'm using the supplied coils at 35W,and the flavor is great!:) I too had the "Wet Base" syndrome,but found by letting off the button,"before" I was done drawing solved that problem. The coil generates a lot of heat,and the juice is still being vaporized,after you...

Just got my Serpent Mini and used 24ga. SS to build a 2.5 ID 7 wrap contact coil. The coil reads 0.32 and vapes great!:) No dry hits,or leaking. I use it on my COV Mini Volt!

I built a 6 turn 3mm ID 24ga 316L coil for my avo24 and I'm using TC set @ 520F! Great flavor/vapor!

If Kanger would only make a different cap for the atty,it would come up a couple of notches on the scale.

After trying the supplied RDA with the 160,I rebuilt the RDA with 26ga.SS! The supplied Clapton coil,constantly spit and cracked hot juice everywhere.I used 7 wraps on a 3mm rod. It reads 0.28 and vapes well. With a different build in the RDA,it isn't quite as bad,infact it is about 100%...

I just received my 160 a few minutes ago. I put my Velocity Mini on it with a 0.20 SS build in it and it is producing great vapor/flavor. I set the temp at 450 degrees F. Nice smooth vapor! :)

Are any of you using temp control with your BF RDA's? I see a lot talking about SS builds,but not much, if any talk about using temp control with them?

So are you guy's happy with the new box? I have the orginal,and like it,but would like it even more if I could build a stainless BF RDA to use in Temp Control.

Have any of you closed the juice flow holes part way? I've noticed that with 40 PG/60 VG juice I need to close them half way to avoid flooding. I still never get a "Dry Hit" even when chain vaping.

I haven't tried a single coil yet! The air flow can be as loose,or tight as you want it. I sometimes use the 510 adapter to help ramp up the flavor. One thing I have noticed is it feeds juice much better than the Kanger BFRDA.'][/URL]

The Velocity Mini works very well! After having it on my box for the last few days,I think my quest for flavor/vapor production is over! :)

It is pretty short! The thing I like about it is,you can adjust the air flow,and drip tip to get the flavor/vapor you want.

I've had mine for 2 days now,and I don't really care for the included RDA,but it works,(just not great!) So I put a velocity mini BF on it with a .3 spaced 26ga.dual coil build. The flavor is over the top! :) '][/URL]'][/URL]

Just got the tank a few days back,and I'm liking it a lot! :) I built a set of Nickel coils (0.08) for it and it is sweet!