Search results

  1. boathook

    Ana Box Mod Dna30

    Mine does this as well. Yours doesn't glow around the USB plug as shown in my picture? And to confirm, on mine the LED does shut off after the battery is fully charged.
  2. boathook

    Ana Box Mod Dna30

    I haven't been able to leave it plugged in long enough for the light to go out. I may have to try tonight. Back to MrWire's post: I do see the voltage increase on mine when the battery is anything other than fully charged. I have a 1.4 Ohm atomizer and I have it set at 18.5 Watts. When I...
  3. boathook

    Ana Box Mod Dna30

    Got my Ana Box today. Found this thread after I ordered, and got a little nervous. I didn't realize they were that new on the scene with this thing! LED for charging shows RED when plugged in, faintly. I can see basically a red dot on either side of the USB port. I haven't noticed a...
  4. boathook

    ISmoka Magoo... res/no res???

    The ismoka Magoo is a clone of the Ithaka, right? If that's the case then yes, it should at the very least have non-res wire on the hot side legs that run down the ceramic. Are you sure the res and non-res wires aren't just welded together?
  5. boathook

    Atomizer like "thingey" for taste testing

    Sounds like a 2-piece Joyetech atomizer and cartridge. (Where the term CARTO-MIZER comes from -- a combination of a cartridge and atomizer in one) Atomizer: Joyetech 510 Atomizer Cartridge: Joyetech 510 Empty Cartridge(5pcs) My advice: Throw the cartridges away, drip directly on top of the...
  6. boathook

    Fogger V3 - Just got it . . .

    Ok, so I actually got mine to function in the same manner. I loosened up the top cap, then slowly "unscrewed" the pyrex and the chimney started unscrewing. Once I saw there was a visible gap, I screwed the top cap back down tight onto the chimney threads and it started feeding more. Actually...
  7. boathook

    Vamo Shuts Off On It's Own & Poss Fixes

    I have another couple notes to add to the list of possible fixes. My fix for it was probably a little more extreme than what was necessary. Basically, on the V1 and V2, the Ego/510 connector is pressed into the top cap. The top cap is pressed into the control head portion. Ground has to be...
  8. boathook

    eVic setup and photos

    I got my CigNot order in today's vapemail! Got the black kit and a black flat top-cap, as well as a standard flat top-cap. It's amazing that something as simple as the shape of the top of this thing can make it feel (look) like a completely different mod. Silver With a Fogger V3: Black...
  9. boathook

    Anything I can do with broken evic heads?

    This looks like it may be pertinent to your situation:
  10. boathook

    Magneto???

    As far as I know, the Magneto is a mechanical mod produced by Shenzhen SMOK Technology CO., LTD (Smoktech) Smoktech Magneto Product Page It has some design cues from other mods out there, but I don't believe it is a "clone" of anything. That being said, I personally find it to be a...
  11. boathook

    Vamo

    I run microcoils on mine at either 6V or 15W, whatever will mathematically give me more amps to the coil. I'm sure that in reality though, I'm not getting 6 volts to a 1.2-Ohm coil, and that it's topping out at 15 Watts (~4.2 Volts) as I don't really notice a difference between the two modes on...
  12. boathook

    Good purchase? What do you think? (Mech)

    I've read tons of great reviews of the Rocket. I almost picked one of those up as well. (still might) The Pulse clone looks solid. It's a glass tank rebuildable. Shouldn't be too much they can eff up on that design. As for the K2, I know nothing about it. All-in-all, my Fasttech experience...
  13. boathook

    Fogger V3 - Just got it . . .

    Why not? No mod, or is something wrong with your Fogger?
  14. boathook

    Fogger V3 - Just got it . . .

    On mine, turning the pyrex does nothing but slide along the bottom o-ring, so I'm not sure what metamorpheus is meaning. I did find that if I set the chimney on a bit loose, it does allow for better wicking with a thicker wick in place. The tradeoff was that it flooded really easy. So I just...
  15. boathook

    noob simple question how many bottom coil RBA's are out there?

    Not necessarily a bottom-coil design, and it does require non-resistance wire, but this thing is the top performer for me in the "can I lay this down on its side and rebuild it and whatnot" category: Ithaka Clone It's got a tight draw to it, but it does work very well. I also have the Fogger...
  16. boathook

    Which VAMO

    As an owner of two Vamos, I'm considering a Sigelei Zmax as well. 101Vape has a V3 Flat-Top Telescopic for $42. 101Vape Zmax Perhaps the wallet will soon allow...
  17. boathook

    Which VAMO

    And now, I correct myself. The V4 is the same body as the V2 but with the V3 board that has OLED display. The V5 has the removable top cap, and that is exactly what I would go for.
  18. boathook

    Which VAMO

    I wouldn't worry about manufacturers as much as the "version". I own a V2, and the juice well around the ego threads is not technically removable. V3 and up has a top cap area that you can just unscrew. V4 and up also has a nicer-looking OLED screen versus the older-style blocky-number...
  19. boathook

    What are you waiting for in the mail?

    Here's my quick run-down for the week. Mod Holder for the car: Cup Vapes by CranieYums 3 Feet of XC-116: From RBASupplies Fogger V2: From VenerableVaping NicoTicket Liquid Order: 15ml Gravity, 15ml Betelgeuse and 30ml Custard's Last Stand Still waiting to hear if Fasttech is...
  20. boathook

    E liquids, Flmmable?

    Flammable? Yes. In the sense that if you get anything hot enough it will catch on fire. PBusardo doing a flavor burn on a stainless wick: A PBusardo Review - The AGA-T(s) - Part 2 - Assembly & Building Tutorial - YouTube It's all about the heat to liquid ratio. Unless you're applying...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu