Search results

  1. ZombieJuice

    What a fight

    Gotta understand that everyone is different. Seems like these days the majority of people are into direct lung, low resistance cloud chuckers. Odds are that vape shop sells more 6mg that 12mg or 18mg. When I started vaping in 2013 the majority of vapers were MTL (mouth to lung) or maybe that...
  2. ZombieJuice

    Digiflavor Siren GTA

    Any word on what might be different with V2? I really hope they add a smaller air hole as the smallest hole currently is too open for MTL. The top cap threading could be improved upon a little too, it's a little sticky and hard to catch at times. Great RTA btw, I haven't had a single leaking...
  3. ZombieJuice

    Build help needed - coils heating outside in, legs melting

    Watch this video about 5 min in you see the pulse and squeeze. Here is the link for product support, select Evic VT and see what they have to say. Technical Support - Joyetech Sent from my Nexus 7 using Tapatalk
  4. ZombieJuice

    Build help needed - coils heating outside in, legs melting

    With 5-10 wraps on a 2.5 mm / 2 mm that would put you roughly around 0.8 to 1.8 (give or take a little). You DEFINITELY do not need 25-30 watts to dry burn your coil. Take it down to around 10-15 watts especially if your above 1 ohm. I usually pulse at 11 watts for my 1.2 ohm builds. The...
  5. ZombieJuice

    Kayfun? Not so much

    I have an authentic K4 and have zero issues with it, if you understand how to build and wick a Kayfun type device you will find they are all about the same. Now please don't take offense as none is intended but it seems you may just need a little more experience with it and you will be fine...
  6. ZombieJuice

    Coil Builds

    Resistance doesn't matter (well maybe a tad) when using regulated devices. The whole reason "sub ohm" became a thing was because people were using mech mods that could only put out around 4 volts, you had to build low to get the watts necessary for "cloud vaping." People still seem to think...
  7. ZombieJuice

    LET'S TALK VELOCITY :D

    50amps on a 20 amp battery... That can't be good for the battery let alone safe. Does battery get hot at all? Why not get a dual cell mech? Sent from my Nexus 7 using Tapatalk
  8. ZombieJuice

    WLS KV5 18650 2800mAh IMR Rechargeable High Drain Batteries

    From what I understand it takes A LOT of money to research, develop and manufacture your own cells. The only companies that can afford to do it are the big electronic companies like Sony, Samsung, LG etc... 99% of the smaller companies that sell batteries are buying B-class batteries from the...
  9. ZombieJuice

    Best new Tank for Provari 2?

    You can get authentic Russians 91% for 39.99 and authentic Russian 2.0 for 59.99. They are great RTAs, I wouldn't go with any dual coil RTAs as they are more catered towards lung hitters. Everything seems to be about low ohms and huge lung hits nowadays. I'm a mouth to lung vaper and used...
  10. ZombieJuice

    Help me solve this leak in my Russian 91%

    I made sure to tilt it when I blew to clear the flood (so the juice wasn't feeding) but anyways. Unbelievably the o-ring I put below the chimney has totally solved my leaking. Don't ask me why it works but I'm glad I found a fix. Thanks for all the input guys. Sent from my Nexus 7 using...
  11. ZombieJuice

    Help me solve this leak in my Russian 91%

    Wow I just noticed something, there was an o-ring in the "extras" bag that comes with it that was an odd size. It was smaller than the tank o-rings. It fits perfectly around where the chimney screws on. It sits right below the chimney where the juice channels are. I put this on and filled...
  12. ZombieJuice

    Help me solve this leak in my Russian 91%

    If you need to see some specific let me know, all seals look good although still getting seepage from the center pin screw in bottom. Although I don't see how that would cause my leaking... Sent from my Nexus 7 using Tapatalk
  13. ZombieJuice

    Help me solve this leak in my Russian 91%

    I'm about to head into work I will post some pics when I get home. Sent from my Nexus 7 using Tapatalk
  14. ZombieJuice

    Help me solve this leak in my Russian 91%

    I have the Russian 91% (the real one not a clone) and have been experiencing leaking that is driving me mad, I can't figure out the cause. I'm experienced with RBAs and have totally taken apart my Russian trying to figure out why its leaking but I'm coming up short with a solution. The...
  15. ZombieJuice

    What's your day job?

    I love the complex names people give their simple jobs. I am a fiber optic HSI service technician, also known as the person you call when your internet goes out. Sent from my Nexus 7 using Tapatalk
  16. ZombieJuice

    Can anyone tell me what delivery system this is?

    It's a 19mm not a 22mm. The top of the Provari tapers down from 22mm to 19mm on the top. Sent from my Nexus 7 using Tapatalk
  17. ZombieJuice

    My Very First Rebuild....

    I've gotten some funky tastes from unboiled organic cotton. All organic means is its grown organically. I have got some that had latex in it. CVS has sterile rolled cotton that is 100% latex free, that may be a better choice if you have trouble finding organic cotton that tastes good right...
  18. ZombieJuice

    Update of my setup

    I see you're rocking some Santita's tortilla chips, I was about to hate on your pic because you can't read the green captions but then I saw you like my favorite kinda tortilla chips... Sent from my Nexus 7 using Tapatalk
  19. ZombieJuice

    Best Dripping Atomizer?

    Check out RipTrippers YouTube videos he is all about some drippers and has great reviews on them. I know he has a couple favorites that he talks about a lot. You will definitely find something if you check out his channel. Sent from my Nexus 7 using Tapatalk
  20. ZombieJuice

    Full size russian

    Turn upside down and completely unscrew the adjustable center pin, the center pin screw will come out completely along with a small black o-ring. Look inside the hole and you should see a silver screw with a flathead slot. Hold you positive block into the position you want then tighten that...