Search results

  1. b0bl0blaw

    Mike n Tibs DNA Mods!

    Here's mine - 1st attempt on the right. 1590a with panasonic PF 2900mah. I screwed up with the dremel and took a gash out of the black coating on the lid. Now brushed aluminum with a belt sander :). 2nd on the left - 1590B with dual LG HE2's. The first board had an issue and I didn't realize it...
  2. b0bl0blaw

    Best iron for the money

    By far the best for the money is below. Several people that I know have this and I've used. Hakko 936 clone... Soldering Station with Adjustable Heat Range (USA Warehouse)
  3. b0bl0blaw

    hcigar kayfun 3.1.... Problems.

    I filled the fill hole with hot glue as it was all I had around. It leaked out the hole the first time I filled it. Now it works great and I just fill from the top. I found a video which described flushing out the fill hole to make it hold on a r91. The hcigar hole would never seal like it did...
  4. b0bl0blaw

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Mamu, thanks for posting this! I built mine and got it mostly together. I used a hammond project box, 1590bsbk. Pretty large box but what I needed to fit my Orion 90c 4000mah lipo :). It actually fits pretty well in my hands. I used Lexan for the front case similar to your Milo mod. The ports...
  5. b0bl0blaw

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Hey Mamu! Any specific specs for the 220 ohm and 7.5K ohm resisters? Can you link to an example on mouser or digikey? Thanks!
  6. b0bl0blaw

    DNA 30D by Breaktru

    can you link us to an example of the fishing line or weed wacker material? Thanks!
  7. b0bl0blaw

    Yah it rocks! After having the ehpro kayfun 3.1 for a day, I immediately went and ordered an...

    Yah it rocks! After having the ehpro kayfun 3.1 for a day, I immediately went and ordered an aqua clone from congrevape.com. BTW you seen that site yet? Group buys for pretty good prices. I also joined a few facebook groups - 1.1 Group buys and vape trading, and Vape Trading and Group Buys. I...
  8. b0bl0blaw

    What up! BTW if you haven't tried a Kayfun style atomizer, holy crap!!!

    What up! BTW if you haven't tried a Kayfun style atomizer, holy crap!!!
  9. b0bl0blaw

    Dna 20

    I believe House of Vapor has them in stock. I just bought 2 more earlier this week.
  10. b0bl0blaw

    My DNA20 box mod project build

    on my standard milo's mod I was planning on using a similar switch and it didn't fit with a similar(single) battery box as you are using. I ended up using three of the small metal tactiles and was unhappy with it at the time, but love those switches now. For the next build I bought the 1590BS -...
  11. b0bl0blaw

    Chi Clone replacement pin

    meaning the brass pin in the switch? Go check out a hobby store and look at RC Car axle pins - I think something like these might work but may need to be cut down. Team Associated Factory Team Axle Pins (4) [ASC1654] | RC Cars & Trucks - A Main Hobbies
  12. b0bl0blaw

    I just used a panasonic pf 2900mah 18650 and moved the screen a bit. It was like $70 in parts...

    I just used a panasonic pf 2900mah 18650 and moved the screen a bit. It was like $70 in parts, but a pain in the .... Took me 6 hours to build it. http://www.e-cigarette-forum.com/forum/battery-mods/366666-milo-dna20d-mod-step-step-how.html
  13. b0bl0blaw

    sweet! I haven't tried it with the steel mesh yet - I ordered mesh off ebay from your link. With...

    sweet! I haven't tried it with the steel mesh yet - I ordered mesh off ebay from your link. With cotton for whatever reason it doesn't taste as good as either dripper, but I like that it holds so much juice :) I built a DNA 20d a couple days ago - milo's mod. It freakin' rocks!!!!!
  14. b0bl0blaw

    Shopping List For Rebuildable RSST This Weekend

    I get 1.9-2.2 ohms with 9/10 wraps of 30g around a 1/16th drill bit. I'm using the RSST as an autodripper with cotton, only partially going into the tank through the wick hole and also through the fill hole. I lost my fill hole cap the 2nd day :). I also drilled out my air hole to 3/32" i...
  15. b0bl0blaw

    Thanks! Same to you!! You went all baller with a provari??

    Thanks! Same to you!! You went all baller with a provari??
  16. b0bl0blaw

    Best beginner dripping RBA?

    I have a scar and an igo-w. I've drilled out both a bit (1/16th). The scar has thumbscrews and holes, but draws air in through a single side hole in the base so the draw is fairly tight if you like that. The Igo-w has two holes on either side which were very simple to drill out. Both are very...
  17. b0bl0blaw

    Backups... backups... backups...

    LOL! Sounds like me after a few weeks :)
  18. b0bl0blaw

    Miniprotank microcoil question

    yup, completely normal! If it helps at all I've been more consistent building horizontal coils then vertical. The vertical coils seem to be way more hit or miss and are really picky with how much cotton you stuff in.
  19. b0bl0blaw

    First mod Evic or zmax v5

    The evic amp output and watt limit is restricting if you get into rebuilding coils on a RBA or something similar. I almost bought the zmax v5 but ended up going with a vamo v5 based on cost
  20. b0bl0blaw

    Kanger Protank II Coil rebuild

    Torching helps a bunch to get the coil tight. I've rebuilt 10 or so coils and have had a good experience with all of them. I bought a cheap cigar lighter on amazon which works great for $5.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu