I've not used the rose but can vouch for the lemo. I have 5 kayfun 3.1 clones and two kebo russian 91%s. All work very well, but not near as well as the lemo....and for the price and performance of the lemo, imo it's definately the way to go for an RTA.
As a cotton user my view is skewed. Cotton IMO gives more flavor and vapor as it holds/wicks juice more efficiently than silica due to more air space between the fibers. Cotton will burn however, silica you can dry burn if you want with no ill effects.
I love mech mods for the simplicity. Having said that, I had already been rebuilding coils/set ups on russian 91s and kayfun 3.1 clones for awhile for use on vv/vw mods. I get the coils dialed into 1.2-1.4 ohm & slap it on a mech and I'm good to go. My stingray clone with a kebo russian 91 is...
I second a kayfun style tank. Great performers in both flavor and vapor. Hcigar kafun 3.1 can be found for about $35 I believe. Kanthal some rolled sterile cotton and some practice after watching rip trippers vid on microcoils/chimney coils. I tried the ehpro kayfun light plus with a bigger...
I have a nemi clone and a stingray clone. The stingray fire pin is much easier to work with than the nemi....mine came unscrewed in my pocket at work and was auto firing like mad. The lock ring works the same on both, though with my stingray I can set it upright without it firing. I have the...
From everything I've read (I'm only on page 104) glass allows the ultrasonic waves to pass through to the liquid contained there in much better. Can you? Sure, but it decreases the efficacy of the ultrasonic. And then there were questions of plastic breaking down.
I had one of the regular ephro kayfun lite plus tanks....awfully tight draw, drilling out the airflow didn't help, I ended giving it to a friend. I believe the larger airflow from eciggity solved this. God I hope.
Kayfun Lite Plus by EHPRO (Larger Airflow Hole) - Eciggity
I've heard good things about these. Mine's em route so I can't tell you how good the draw is. I believe vaping with twisted420 did a review on YouTube you could check out.
I recently have gotten into DIY. The ejuice me up calculator works great. And if you haven't checked out the thread on ultrasonic cleaner steeping in the DIY liquid subforum I definitely recommend it. Works like a charm!
I top fill a kebo russian 91% and 5 hcigar kayfun 3.1 toppers without leaks. Another thing that could be causing problems is that when one unscrews the top cap, the chimney also unscrews most of the time with it. You might make sure the chimney is screwed down snug after the top cap is off...
I've got an hcigar hades clone. Mine came with magnets but I had to switch them out with the spring. To get the plastic ring out I got my finger nail in a groove of the ring near the top and applied pressure to pull it out while turning the base to work it out...took a couple of minutes but I...
Depends on what your wrapping around. Here is a cool spread sheet I found digging through some threads awhile back.
https://docs.google.com/spreadsheet/lv?key=0AiaRSDxC1vG6dC1HZEtmY0pPYzBvdUw2blJHVjdkc1E&usp=sharing
The ohms will vary slightly depending on how tight you wrap but it's pretty...
The gauges I use most frequently are 28 and 30, but I'm usually aiming for 1.1 to 1.4 ohms depending on the mod I'm using it on. If the jewelry tool doesn't have wire cutters then toenail clippers work great for cutting wire and the wicks. Good luck with all those toppers. You're gonna be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.