Search results

Oh and the 2014 version of the i4 will handled 26650 IMR batteries also.

Oh well I let you know if and when mine fail. I've been using one of two since I got the Clouper Mod 6/6/14 exclusively every day without a single problem running down to 1 ohm coils up to 1.8 ohms. I have been swapping batteries when a change is needed, usually for me in the 12 hour range of...

Removing the insulator is no problem with a loose post as is simply sits on the base and fits between the two posts with double C type cutouts. I was thinking just put an epoxy or some other type metal to metal glue that would conduct. I don't have the means at this time to silver solder it and...

Found my voltage meter (moving at the moment) and tested the posts. It turns out the one that came loose is the negative so would assume this one could be epoxied fairly easily. If you aren't familar with the Magma it has a plastic insulator between the two posts.

It is the Infinity Magma Clone which as I said has been great until I dropped it. The pin is a press fit with no screws and figure the only thing that might hold it tight is epoxy or solder perhaps. I think it would need to be a bit conductive but I'm not sure if that matters either. Since I...

Yes it just came out but no need to hammer as it simply goes in all the way and turns when tightening up the screw to install a coil. This is why I though perhaps an epoxy glue or some kind of metal glue would work. I have some epoxy glue I've used to hold metal to metal which works real well...

Is there an epoxy or glue weld type material that can be used to hold a press fit post back in that also conducts electrical current? If so what is the name of it, where to get it etc. Thanks for any assistance as this was a really good clone until it was dropped while the top was removed on a...

I'm using eFest purple 20A 3100 mAh imr 18650. I don't often go below 1 ohm when using these, they last me 10 - 12 hrs. depending on the amount of vaping I do in a day. Sent by Tapatalk HD on a Kindle HDX.

I actually prefer this for my 1.0 to 1.5 ohm devices. For .3 to .99 I prefer my mechanical mods. I rarely go below .3 regardless.

Here is a review on the Clouper 30 W and shows the differences between it, a real Hana Modz and another that is out there that I wasn't aware of it. I found it a pretty good review especially the really small things that show the differences from the 510 connection, inside, wiring etc. Cloupor...

I have noticed the difference in what it says and actually uses is a bit different based on the Ohm's Law calculator. For example right now I have a Kayfun on mine with at a measured ohm of 1.17 ohms using a couple of methods including a Volt/Ohm meter. Now on the Cloupor is shows as 1.1 ohm and...

Actually the Russian improved it as a few Chinese clones have done as well. There are a few 26650 mod clone and RDA/RBA that the originals companies never made but the Chinese did.

Yep it happens for sure. Kayfun and Russian are the same and the Russian is the clone.

It really depends on the RDA and how far the screws are apart. I know my IGO-M I changed the Allen to Phillips as it just has more room as well as better larger threads.

I actually have two favorite setups now. Kayfun Lite + on a Cloupor 30W mod and a Magna RDA on a Nemesis. For all day vape the Cloupor and for dripping the Nemesis.

Thanks I will order some and see if I can get it to tread. I've had no problems with the posts but the block has been the problem. I also have an IGO-M which seems to have copied the brass monkey deck design but actually made it with larger holes and stronger materials. I have both Allen head...

Sorry I took if for granted this group was for adults only. So suggest if anyone is interested the look up a Mutant 26650 Mod Review on You Tube then take your pick. Twisted's just happened to be the first I found.

Here is a Twisted 420 review of it (VIDEO REMOVED - LANGUAGE NOT APPROPRIATE FOR ECF)

I've gotten a couple of J-Wraps and never gotten a tracking number. They ship out the wraps via regular mail between two pieces of cardboard. I usually arrives with in 2 to 3 business days. Now there Mod holders and stands not only take about a month to get if you get the one shown below, the...

Thanks that would be appreciated. Once I have this size I will know what the next size up is and buy some allen heads as well as a tape for that size to fix it.