if you use bits like the ones i mentioned you can go to whatever size you want, no need for jumping from 1 to 1.5 to 2 to ...
and if any of yall are at that size that makes that annoying whistle, try to round the edges after you drill the hole out
The igo l and w have small chambers which are great for flavor but can be hard to do low builds in without getting hot hits. My igo w that I use for subohming has massive holes, 2 holes probably just over 3/16. if you go with a larger chamber like the patriot the hit does not feel quite as hot...
If you wire your pump power into the power button on your mod you could turn it into a cooling/auto-dripping system all in one lol. Instead of having the system loop back send the juice to your dripper. Mount a bottle of juice to your mod as the "reservoir", run that through the cooling system...
This whole dealio start out a while back when I decided to hollow out an old carto after switching to rebuildables. I wanted a tall wide bore tip but they were all around $30 when I was looking. I took the guts out with a set of small needle nose pliers, cut the top off the carto-condom to cover...
Dremel is perfect, that is what I use most of the time. the bits in the picture are diamond bur bits. go slow or the bits will get dull fast, also you can use water to keep the bits from getting hot. just put a couple drops on the hole you are drilling. you can get the bits at almost any...
The draw is way too tight from the factory, but when doing mouth hits it is a pretty fine line between too tight and too loose. drilling for lung hits is soo much easier if you go too big you can build lower ohm. next time you drill for mouth hits try using something like these
use one of the...
That is from the kf 3.1 on 101vape. picture doesn't really show the clear difference of the rust and the juice but its pretty nasty. threw a pmma chimney on it but feel like I should just toss this pos :mad: took apart the chamber in the base of it and looks like there is rust starting on the...
Pretty sure it is rust, the juice I have used in it is yellow
This is the afc screw that came in it and does not fit at all
I have been wanting to get some new screws for all my rda/rba gear just have not found them for a decent price yet. I have the cheap kfl from fasttech and I have not...
Have you had any other issues with rust on your KF3.1 from 101Vape? I just took mine apart after about a week of use and while cleaning it found TONS of rust in the chimney :facepalm:
Just sucks because the afc didn't work on it either. Base and screw had totally different thread patterns...
If you want cleaner twisted the way I do it is by putting the ends in the drill's chuck, and put a screwdriver threw the loop while twisting. that will keep the tension equal between the two strains and the will be equal lengths when you start.
The tip is actually a gutted carto. Just throw an o-ring on the bottom and it work perfectly as a dt, and you can put a dt on top too. the rda is an igo-w. I like warm and cool vapes, but i hate hot ones :-x my buddy bought a dt from ninja mods for like $30, it has an adjustable afc ring on the...
killer ideas! I will have to start posting all the random thing that pop in my head here, the squonk tube is one thing that I have been trying to wrap my mind around for some time now. awesome thread!
DAYUM thats a tru WIDE BORE! and I thought the 13mm tip I had was huge but ur tip looks like it would swallow mine wHOLE. this is one that I like using for super low ohm builds(alright mybe they aren't that low compared to what other ppl here build but...)
the little bit of xtra air in the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.