Search results

This was my solution, no wiring to worry about, remove an o ring to change my 18650 battery. http://www.e-cigarette-forum.com/forum/battery-mods/45125-switchless-copper-pipe-mod-4.html page 4 shows how I made my switch and keep it all together.

Have been using this with my 18650 battery for about 3 weeks now. works great and only cost about 5 bucks to make. My wife uses one just like it, but shorter with an 18500 battery. switch is working great, no problems.

I liked this idea and wanted to use my 18650 batteries, but didn't lie the idea of the battery having to move to connect. I also added the RCA mod on the atty end. I soldered a small spring to the atty end RCA center, then used the post screw with a couple nylon bushings from the hardware store...

But most don't have a master switch.... I have a couple magnum flashlight mods, but both are showing signs of the switch going out. Want something more simple, no wiring and this looks like a poor mans Steampunk Sparkplug kind of mod. I am going to work on building something close to it this...

great, thanks for the extra picture. How is it working? still going strong?

I looked at most of these and the current price is way above cignot.com. cignot.com is still 35... everyday and you don't have to wait for china

Can you detail your switch more so we can build one?

I agree, great review. I think the Steampunk Sparkplug is the best value for dollar going now. I can't understand all the negative and 'they copied' comments....

Wasn't the ST2 a limited production item? Suppose to sell for around $50 ? As far as a 'copy' , I think alot of great minds think alike and there is only so many ways to design a battery holder/switch with no soldering or wires. I think the object would be to keep price down, anyway you can.

That's right home built, straight and easy. Like the Chuck, the Sparkplug, etc. Much cheaper to start with a 1.00 piece of aluminum than starting with a 16.00 flashlight. All we really need or want is something easy to hold and durable and cheap, guess that is why the magnum mods are so...

If that is what you want to call them... Wondering if anyone has tried openening the two vents at the end of the flat sides on a 510 cartidge? seems this would let more air flow through to the mouth end, maybe an easier draw? more vapor? I just did sitting here at work, cut them both down just...

A couple comments: If you have ever carried the atomizer loose in a pocket or layed it on the sofa, etc, the 'chunks' could be dirt, etc. I carried one in my shirt pocket while at work one afternoon.... got home and went to clean, saw chunks, looked with magnifier glass like small...

But you are using a chinese atomizer with a chinese cartidge. The battery holder/switch is the easy almost foolproof part. I do believe anyone can compete, if we can take a $2.50 flashlight, a $1.29 switch, and a $4.00 atomizer/bat connector and build a 'magnum' mod in 15 minutes and sell it...

I just saw the ad today. It does look good though with lifetime warranty and a 30 day money back guarantee. Seems that would be nice as there are always so many PV's for sale after a week or two, like a lot of prodigy and SD for sale after only a couple weeks use. I still think they are all...

I have been using the PTB but like most of you, can't really see much difference between anything I have tried. Seems the trick is just to keep adding drops every now and then. I do get lot of gurgling with the PTB if not really careful, and most of the thinner fluids are the worst.

This one looks alot better than the mod with the hole in the bottom directly in line with the two holes which lead to your mouth.

ditto for what the others are saying Cignot and Nhaler. Two of the best I have dealt with. Terri and Drew are both great and comunication is tops.

Scott, please do, I am sure there are a lot of us that want to know.

Maybe that is it...or the missing part, smart and solid! think you are on to it. I believe there are so many mods floating around here now that have been bought and sold and then 'remodded' by who knows who.... could even be by one of those who start their post by " I have never soldered...

ok, I have rebuilt both I bought. running 18500 batteries, neither out perform the stock 510 battery. better vaper, throat hit from the stock 510 battery. I have tested both magnum mods, they get 4.2 to the atomizer fitting. Now when I test them with the atomizer screwed in they both get...