Search results

Their are 2 flavors in 11 mg, just asking if they had any plans to increase the ammount.

Ok thanks a ton, new question: If my device draws 12 volts at 800 ma, that means a 9200 mah battery would last around 9200/800 = 11.5 hours. Is this correct? Thanks so much for your help nico!

Thanks a ton nico, that charger so far is my first choice. I thought about putting it in the mod forum but this is not e-cig related so i put it here hoping i would get some input. I am making a battery pack capable of powering a vaporizer ( not our kind of vaporizer ;) ) The biggest...

Ok so i am making a custom battery pack for a 12 volt situation, my plan so far is to use 18650 3.7 volt 2400 mah protected li ions. Im going to put 4 in series, and then 4 packs in paralel This will give me a 14.8 volt 9200 MAH pack, ill then use a voltage regulator to drop the voltage to...

Do you have any plans to carry liquid in lower strengths then 18 mg?

I sent ya a pm, i and about 30 people i know would love to test it out.

to run a tube from your cano bags all you need to do is cut a small section of normal bag, maybe 3-4 inches. Put this on the valve like normal and then stick a peice of silicone tubing ( should be food / medical grade ) in the other side of the bag and zip tie the bag to the tubing.

Im getting close to running out of my cash menthol and am planning on buying my next batch soon, id like to buy some dura carts to put on my RN4075 along with hopefully a few flavors of liquid in small amounts. I dont have hardly any money at all so cheap and good is obviously key.

Visit this website for any and all info on herbal vaporizers www.****combustion.com ****= ... with correct spelling. For a portable unit that can be used w/o being hooked up to electricity limits your options, these are the ones i would suggest: The vaporgenie, this is a pipe looking...

Cool, thanks for the reply nico, hopefully tomorrow i will go to radioshack and pick up an on/off switch and some other stuff. I tried to put the LED in my SD today and was about to press fit my connector in again when the negative end of the LED fell out :( I was able to get it in their...

I just finished making my screwdriver clone and i had to take the back click switch out and ground the spring to the casing, i put another push button switch on the neck of the flashlight. Id like to put a master on/off switch in the back where the original switch was, can i just wire it by...

sorry bout that, replied.

haha to my understanding 15 days is pretty quick for dealextreme, i got impatient waiting for my stuff to come so i made a USB passthrough to use until i could build the screwdriver clone. The button has worn in and it activates much easier now, ive also over dripped / filled the cart and had...

Yeah deal extreme is great if you can afford to wait for the shipping, it only took me 15 days to receive my cree cr2s and charger.

shameless bump, can i just wire a master on/off switch in the back by buying an on / off switch at radio shack and making one prong touch the batt / spring and the other prong touch the flashlight casing? Hoping someone can help me out, thanks.

AnyVape EasyVape Vapesalot SpaceVape MagicVaper

Thanks, i already plan to get another black cree to try again, plan to use the LED and ive got a few other ideas. Does anyone know how i could rig up a master on / off switch in the back where the original switch was? I took that switch out and just grounded the spring to the case so i could...

Took me FOREVER. The button REALLY has to be pushed down to work, but i think its going to wear in with some time. Works great, produces great vapor and looks good. Sorry for the horrible pics haha, cam keeps running out of batts.

I took out the back switch and grounded the spring to the casing, i was then able to test my switches to see if they worked. After hours of messing around i broke one of the ends off of both of my switches so i gotta go back to radioshack and buy some more. I think i got this all figured out and...

Well i took out my switch and was able to get it working with the back switch, i found out that it only supplied power when the back switch was held all the way down. I tried it again holding down the back switch and it did not work. Then i tried it once more with a different switch and wasnt...