Search results

Welcome aboard! - If you have any questions, please don't be shy - ask away -that's what we're here for.

Were the batteries married (i.e., all the same type, bought at the same time, charged and used together)? If not, the more used batteries might have a lower mAh due to age and usage. Battery capacity decreases with use. Hope it helps and Happy Vaping!

The point is safety. Pushing a battery to its limit constantly is never a good idea. It's better and safer to leave some headroom. Also, as batteries age, their Amp limit decreases. So, if you are drawing 20 Amps from a new 20 Amp battery, sometime down the road, you will be drawing 20 Amps...

I don't own either, but from some research, I found out some details that may help. The Matrix is a starter mod, and usually comes with coils in the 2-ohm range. Many starter mods won't fire with coils that are less than one ohm in resistance, and I suspect this is true of the Matrix. The V12...

Ohms jumping is almost always a connection issue. If you are using a stock coil, you might change it out for another If you are using the rebuildable deck, check to see that the screws are tightly trapping your coil leads - they sometimes work loose Another thing to try is to clean both your...

Congratulations @jseah!

Hi Jim and welcome to ECF! From what you are describing, it looks like you have a pretty good start on things. You have your CE4 startup items to use for backups, a VERY nice combination with the Presa and the Nautilus, and something to grow with while learning to build coils. You are also...

According to my admittedly cheap calipers, this looks to be an 8mm OD by 1.5 mm thickness o-ring. You could try the following, and see if that does the trick: $0.80 Rubber O-Ring Seals for E-Cigarette (10-Pack) 10-pack - 8*4.9*1.5mm (OD*ID*T) at FastTech - Worldwide Free Shipping Hope it helps...

It's hard to say without seing pictures or being able to examine the device. That being said, if there is any chance that metal could flake off the threads when screwing your atty onto the device, there is some danger that the loose metal might cause a short - not something you want to happen...

IMHO, one of the best best batteries for mechanical mods is genuine Sony VTC4s purchased from a reputable vendor. Reliable sources for batteries: Batteries-Chargers-Flashlights-Only The Best Authentic AW Batteries - RTD Vapor Illumn.com - Flashlights, Batteries, Carry Gear, Intelligent LED...

@Katdarling - Tag two of your friends and tell us of your TC experiences. If you dont have any TC experience, just tell us of your vaping experience. That's all there is to the contest :)

@Racehorse @Katmar @drunkenbatman @Susan~S My first foray into the TC realm was a Snow Wolf 200 with the SubTank Mini and pre-made nickel coils. Once you find the settings for the juice you are vaping, it's a really nice setup. It might not be for everyone, though, as it's rather heavy. I'm...

With a fully-charged battery (4.2 volts), and the resistance of 1.7 ohms, you will be drawing 10.38 Amps from your battery. If the battery is new and rated to at least 20 Amps CDR (Continuous Discharge Rate), you should be fine. Always know (and use) the CDR rating of your batteries. For info...

Sometimes using too high of a percentage of flavoring can actually "dull" the flavor. Have you tried your mixes with a lower percentage of flavoring? Hope it Helps and Happy Vaping!

Sounds like you need to take the atty off the device, let it come to room temperature and put it back on the device to "reset" the resistance reading. Just a guess, though as I'm somewhat new to TC myself.

+1 to what jim said above. For many of us, the journey to not smoking was a process rather than turning a light switch off. Just remember to celebrate the ones you're not smoking rather than worry about the ones you are smoking. Hope it helps and Happy Vaping!

After the paint dries, a coat of "clear coat" might help to make it last longer. Most hobby stores will carry it.

Rinse under hot water and either air dry or use a hair dryer. If you're particular, you can swirl it around in a cup of hot water with a little dish soap first. Hope it helps and Happy Vaping!

+1 to what tmcase said above plus... For info on batteries Baditude has several excellent blog posts on the subject. His blogs on battery safety are a must read. http://www.e-cigarette-forum.com/for...ected-icr.html Reliable sources for batteries: Batteries-Chargers-Flashlights-Only The Best...

Also buy good batteries from reputable suppliers. For info on batteries Baditude has several excellent blog posts on the subject. His blogs on battery safety are a must read before you venture into the world of sub-ohm vaping. http://www.e-cigarette-forum.com/for...ected-icr.html Reliable...