I would recommend the ego one and subtank nano or similar 18mm tank. It is much smaller than an 18650 mod, fits entirely in the palm of my hand. It also puts out a ton of vapor and simple to use, and the whole setup can be had for around $60. Pic below shows size comparison.
Give the ego-one a shot, they are simple, cheap and work great with the nano. I pretty much stuck to vv/vw devices before because I liked the adjustability. But I tried this as a cheap setup to take to work, and it has been working so well I haven't even touched my other devices. Now I have 3...
Thanks!
And upon closer inspection you are correct, and I tore another one apart to confirm. There appears to be 43mm of resistance wire and 18mm of non resistance wire on each end. It measures as 0.0130" diameter wire which is 28ga. Assuming the NR wire is N200, that would put the resistance...
The stock coil is around 3mm or slightly under, the legs total around 18 mm. If you wrap 28ga kanthal around a 7/64" drill bit with 5 wraps it should get you very close to the stock 1.2ohm build.
Or you could put this same coil in the rda base and vape away. Always check with a meter or a VV...
I have never smoked, and started vaping about 9 months ago and it has been a very enjoyable experience. I wanted to try it to see if I got a calming effect out of it and was also thinking if I learned more about it I could help advise smokers on the switch as there is so much information out...
Anybody know what wire kanger uses? I have been trying to duplicate the 0.5ohm build and with kanthal I can't seem to get there.
When I pulled the stock coil apart it was 5 wraps with around 80mm of wire from positive to negative. To get that resistance at that length with kanthal would be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.