Search results

  1. Angus337

    IPV V3-Mini 30W AUTO-SQUONK

    Not having any luck with this device. 1st unit returned after the TC failed, so was operating without any regulation. Just received a replacment and it's not squonking. I can hear the pump, but getting no liquid to the RDA. Think I'll just give up on this and get my money back.
  2. Angus337

    IPV V3-Mini 30W AUTO-SQUONK

    Definitely seems to be a TC issue. Vapes the same at max and minimum temp settings. No sign of any regulation at all. Will have to send it back I suppose and hope I can get a replacement.
  3. Angus337

    IPV V3-Mini 30W AUTO-SQUONK

    Really enjoyed mine for the first couple of days then just lost flavour burnt out the coil. Tried 3 new coils since and they have lasted less than a day before burning out. Liquid feed is working but temp control seems to have stopped working all together.
  4. Angus337

    Innokin Zenith MTL tank--Phil Busardo

    I haven’t tried an MTL tank for a couple of years, recently been rotating between the horizontech falcon and Smok prince tanks. However yesterday I bought a Joyetech AIO ECO starter kit for my wife, but ended up using it myself today. Really supprised how good thie little AIO kit is for the...
  5. Angus337

    Vandy vape maze "RDA"

    Picked one of these up a couple of days along with the rigmod RSQ squonk mod. Thought this might be a good alternative to the 2ml tanks in the UK. I'd say the flavour is reasonable, but not noticeably better than the cleito exo tank I've been using. The main problem though is that it leaks from...
  6. Angus337

    Bandy vape maze "RDA"

    Picked one of these up a couple of days along with the rigmod RSQ squonk mod. Thought this might be a good alternative to the 2ml tanks in the UK. I'd say the flavour is reasonable, but not noticeably better than the cleito exo tank I've been using. The main problem though is that it leaks from...
  7. Angus337

    Aspire Nautilus X tank

    I've given up on the nautilus X, even with the 1.8ohm coils I'm getting next to no flavour. Just got the new Smok Brit mini flavour tank which is excellent. Similar form factor, better airflow and amazing flavour for such a small tank.
  8. Angus337

    Thoughts about TFV8 baby beast

    Just picked up the osub plus kit with the Brit beast tank which takes the same coils as the baby beast. The 0.4 ohm Q2 coils are a bit too airy for me, any thoughts on the other coil options?
  9. Angus337

    Brit beast tank

    just picked up the osub plus kit that comes with the Brit beast tank. The tank takes the tfv8 baby coils and comes with the 0.4 ohm coil installed. Really enjoying the tank, great flavour and clouds, however I get some leakage after each fill. This is frustrating as I chose this tank...
  10. Angus337

    Koopor Mini 2 - 80w TC device ( SMOK / Smoktech )

    I did manage to get it to fire, so looks like a screen issue. Now returned to the vendor. It's a pity as I really like the tank with the 1 ohm coils.
  11. Angus337

    Koopor Mini 2 - 80w TC device ( SMOK / Smoktech )

    Just received my knight kit this morning. Tried 3 different batteries and all I'm getting is a blank screen. The mod seems to be completely dead on arrival. Just wanted to check I'm not missing something.
  12. Angus337

    Smok Helmet coil choice

    I’ve just order the Smok Knight kit (Koopor Mini 2 + Smok Helmet Tank) I was also going to order a couple of packs of coils but then realised there are already 4 different coils available (0.4, 0.6, 0.85 and 1.0 ohm) so not sure which to order. Anyone have any experience with this set up and...
  13. Angus337

    Aspire Nautilus X tank

    When I first tried the Nautilus X, I felt it performed very well apart from the flavour, which compared to my normal Cleito tanks, was almost non-existent. So I’ve barely used the tank. Unfortunately over recent weeks I’ve been struggling to keep of the cigs, largely due to working away from...
  14. Angus337

    Aspire Has just released the new Plato Mod!

    Ive been enjoying the Plato with the sub ohm coil. Also usin the cleito with the air flow about half open and find the Plato almost as good. There are a couple of minor issues Filling can be a pain with some dripped bottles You have to fill up before the tank is empty, otherwise you will get...
  15. Angus337

    Egrip II

    Well just removed the coil, removed excess juice, cleaned everything and refilled. Straight away had the spitting again. When you remove the drip tip you can actually see the eliquid bubbling up from the coil. Not been able to clear the spitting after trying all the suggestions I've seen on...
  16. Angus337

    Egrip II

    Really wanted to get The egrip, but have been waiting to try the notch coils in my cubis tank first, as I wasn't impressed with the original coil options in the cubis due to the small juice flow holes and dry hits. Today I picked up one of the new notch coils, and was initially very happy with...
  17. Angus337

    Aspire Nautilus X tank

    Picked mine up earlier today. Awful flavour to start with buT have noticed a slight improvement after about half a tank. No spitting or gurgling after the initial fill, but after leaving it sitting for a couple of hours, it Started spitting and gurgling badly, to the point that's was almost...
  18. Angus337

    Aspire Cleito

    I've just bought 2nd one too in black. Tfv4 mini, crown, triton 2, subtank mini, and aromamiser tanks all consigned to bottom draw. Love the .4 ohm coil, but would like to know if they intend bringing out any TC coils. SS Clapton coil please!
  19. Angus337

    Vape Forward Stout thread

    Picked up a black stout yesterday. Came with a effest purple 3500mah battery. Looking for something better but there seems to be limited options in the uk. Any recommendations? Best I can find online is the effest green 4200mah. But all the suppliers appear to be out of stock.
  20. Angus337

    Aspire Cleito Issues?

    I think the original problem was that the coil wasn't screwed in tight enough, so it had come a bit loose when unscrewing the top to fill. Haven't had the same issue again. I did change the coil today after almost a week, I pulled the old coil apart to have a look, and it still looked n great...