Search results

I believe the original ones fit, the airflow adapters can also be picked up elsewhere maybe 3f or 2f I'm not sure if in stock. But worth a look. The only problem with that tank kit, is I would say it might be better to use the metal chamber just so you can see if JFC is open or not being PEI...

Vape is great, I have been trying various airflow settings, since I vape more restricted style usually. I Will try moving coil on My next rewick over just the single posative side MTL hole, Currently have the coil more middle at moment Just to get it up and running. Sent from my HD1903...

It fits the posative MTL post It's also wicked fine first time, MTL post has just 1 central small hole but your still left with the 3 on the negative post. Fluffed out tail then cut off ends, then placed in wells Not tried Ultem chamber reducer yet but fits both GT 4s and GT v4 RTAs, The MTL...

@Fstop You just build it like a normal Dvarw it has Ultem or PEI chamber no metal chimney cap for this, As the Ultem chimney has its own inbuilt, this can turn on off over wick holes like a jfc that's what that disc coin thing is for, so you can top fill with this method,

Have all the FL clones got a different colour SS deck than rest of the tanks, I have noticed this on a few pics I have seem that there seems to be a ring of different coloured steel between tank and base, I only have one FL but its authentic, which is same colour throughout. Sent from my...

I will have an authenticate GT V4s on route to me next week from Spain, From what I have read the IV MTL post fits in the 4s So will have a try once it's here. Wasn't a big fan of the IV. But love the GTv3 with the peak airflow reducer and steam tuners Ultem tank. Sent from my HD1903 using...

That tank kit is just an add on for the Orginal Dvarw 22mm MTL, it's been out a while. It's (Across vape) wormhole tank kit, which is a China manufacturer. To Basically to compete with G2 or steam tuners tanks for the Dvarw, everything from Across vape is already made in China, Where as G2...

Threads are totally different on the Dvarw MTL and the FL MTL 22mm decks, FL has less threading so it takes about ¾s of a turn to remove the tank section for quicker bottom fill compared to several rotations on original Dvarw MTL. I only own one KHW FL 22mm & 3 older KHW Dvarws one of the...

Best Taifun depending on what draw you like if a MTL then the older V2 was perfect, if R-DTL -DTL the GTv3 was perfect, v4 is more cloudy and open high power juice guzzler, Would like to try the GTv4s with MTL post see if it compares to GTv3 which has been my fav , the v2 flavour was top notch...

I've seen a build where they use mesh inside the coil in GTv4 and then just put small cuts of cotton on either side to keep the flow to coil they said it's easier to maintain less gunk build up and so own but I guess that's trial and error too. If you pack with cotton use thinner juice if...

Got one just be never tried it, I like my fevs have a Vs and V4.5 would like 4.5s , but I have been using the YDDZ v1 RTA a lot more for RDTL, something different, When I get my Feb out to try again or pick up the S I will see if that disk works to reduce chamber and increase flavour which is...

No bought them separately But there is much more room under them than in the Fev so you can fit larger coils more exotic coils and it wicks like a champ with them Sent from my HD1903 using Tapatalk

Here's what I found Taifun GX - Le top coil 2020 par Smokerstore - Oneshot Media Looks to be RDTA with the steel rope wicks we all know works dam well in the Corona RTAs, BYKA has one The old Taifun mesh used them and the Brunhilde, What we don't know is if it's single coil dual coil or...

Have a look on YouTube, where they wick GT V4, Sent from my ONEPLUS A3003 using Tapatalk

Hello Yes you could use mesh. But you do have a JFC that could possibly catch on mesh if the cotton wick pushes it up slightly, I found just cutting wick tails to just slightly over the sides of the deck and usual fluff and tuck under, The DLC steel wicks sit perfectly on top to feed juice...

Yes you can, Although the Airflow inserts do not pertrude into the chamber like the Fev if that is a plus or minus for you for direct to coil, so you can mount the coil in center or close to the front airflow it is easy to build than Fev but I'm used to the 2 post wrap around builds, You can...

So I bought one of YDDZ V1 RTAs to try, I have looked as far I can see I could be wrong but there isn't another RTA like this it seems to be an authentic not a clone, unless someone can point out where. Now it does have borrowed aspects from others Which everything with a 2 posts or postless...

Yeah dam auto correct at its finest, Sent from my ONEPLUS A3003 using Tapatalk

Being postless you would raise the coil up and still use the same Fev dlc feed tubes so wicking and feeding juice would be the same Sent from my ONEPLUS A3003 using Tapatalk

Has anyone seen the YDDZ V1 RTA it's a kind of hybrid of the Flash E vapor RTA the very same side airflow tubes reducers with Juice flow over the top of the feed wicks apparently fits the Fev dlc feed tubes 4ml glass tank with postless deck so can fit different coils compared to the flash e...