Search results

  1. Rvagemcutter

    Need help with the new kangertech pro rba

    There are things you can do to adjust the vape to your liking if for some reason a 1.2 smooths it out too much. I get where your coming from. Pm me and I will make you a few different sets of coils to try.
  2. Rvagemcutter

    Need help with the new kangertech pro rba

    Well if you can somehow get the coil into your base and heat it u can put the shape back together, if it completely unravels to the point of no return then maybe, not sure but worth a try: cut the length you plan on wrapping, get it really hot, with a torch or something or maybe running some...
  3. Rvagemcutter

    Need help with the new kangertech pro rba

    If you pm me your address I will mail you some coils to use as an example.
  4. Rvagemcutter

    Need help with the new kangertech pro rba

    It's possible change the diameter to 2.5 and with a 32ga wire it's 6.7 wraps and with the bigger 30ga wire it's around 10 wrap (a piece for dual coils). So recap 1.5 final resistance use kanthal wire 30 or 32 gauge, wrap around a 2.5mm mandrel (3 would require less wraps but idk how it would be...
  5. Rvagemcutter

    Clapton Build for KBOX Mini with Griffin 25 RTA on low wattage

    I have a similar setup, I'm using temp control ti wires 24g with a 34g kanthal wrap (Clapton) in running dual coils with 9/10 wraps each. It's .15 ohms and I run it at 440 degrees. I use it at 50w max sometimes it takes a second to ramp but at 70w it Ramps no problem. Maybe you can pull some...
  6. Rvagemcutter

    Crown w temp con. clapton!

    Haha gave me a laugh, I read s post some whew saying that if you want to rebuild buy an rta if you want premades by one for premades , makes sense, got a griffin and it's awesome!!
  7. Rvagemcutter

    Juice swaps - USA - Please read first post for rules and guidelines

    Here we go all are 3mg and pretty much full unless listed otherwise. Naked100 Lavaflow, starwberry pineapple coconut smoothie60ml Essence/Dipped e liquid -pockie(now called dipped) strawberry yogurt dipped cookie30ml Cuttwood- Boss reserve- graham cracker honey blend more than half full 15ml...
  8. Rvagemcutter

    Trouble Finding A New Coffee Vape To Replace Njoy's Double Expresso

    Try "dunked" it's supposed to be coffee and I guess donut but it really taste like black coffee with a little sweetener.
  9. Rvagemcutter

    What kind of coil does the rx75 use?

    I believe it comes with the armor tank, so I guess that means armor coils. Idk I use an rta in all my kids usually the stock tanks aren't the best, didn't like the toptank/ or the one that comes on the evic mini. Favorites are griffin and for premade coils tfv4 by smok
  10. Rvagemcutter

    Prices and supporting local business

    And that's hows I feel . $50 dollars for a crown tank. I had to laugh when he said he was going to start carrying them.. I even told him I bough one down the street for $26. Even suggested retail is 39.99
  11. Rvagemcutter

    Prices and supporting local business

    Sounds like the avail chain near me. I do agree it is a good setup being able to try each flavor first, if it is the same chain I too have bough a mod there .. A tad more than online but like above what's 10/20 bucks when you get it now! :)
  12. Rvagemcutter

    Prices and supporting local business

    i do the same as most of you guys.. Once your educated it's hard to make those buys. Me, I'd rather sell some things reasonably just to bring people in. I doubt they sell many mods but juice and coils seem to move. I know it's been asked buy any favorite online stores that stand behind the...
  13. Rvagemcutter

    Prices and supporting local business

    One of my favorite places to get liquids in my city is actually a glass store. I love supporting local business but I just can't get over the prices on there equipment. For example: Crown tank- $49.99 Kanger topbox kit- $115 Cuboid mod 99.99 15m of misc wire -12.99 Is this normal for a local...
  14. Rvagemcutter

    General newb question

    Also one guess was that the cotton has to be broken in and perhaps the cotton taste was masking the juice flavor, but I must say there wasn't much cotton taste. Just tasted bland wig liquid state Apple Butter
  15. Rvagemcutter

    General newb question

    i have been dabbling into rta systems and some come out good some others ehh not so great, got a kind thing going on and maybe someone experienced can answer this for me, sometimes when I build I have no flavor, it is wicking correctly because I'm getting no dry burn, I've tried it at different...
  16. Rvagemcutter

    Cleito rba maxxed out

    i do believe I got the best performance out of my cleito to date. Been messing around with hybrid claptons on my crown but I like the airflow on my cleito better/ and the dual rba. It took me forever to fit two 26/32 ti/k-A1 wrapped at 2.5, without shorting on the cap or touching the posts...
  17. Rvagemcutter

    Smokin like a chimney.

    Smokin like a chimney.
  18. Rvagemcutter

    Crown w temp con. clapton!

    Any better ideas on increased airflow, that was a lot of coil to jam in the rba so it's not as airy as usually, what you think should I try verticle or just build the coil smaller with s 34g kanthal wrap as well?
  19. Rvagemcutter

    Crown w temp con. clapton!

    finally made an rba build that taste better than a prebuilt. First off I think my main issue was the cotton that comes with the crown rba, totally sucks, I ran and grabbed the pad that came with my kanger kit and the cotton was fluffier and tasted like nothing. This is my first Clapton build and...
  20. Rvagemcutter

    ? For mouth 2 lungers

    My bad I meant some is 70% and some is 80% like 70ish 80ish
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu