Search results

I have a Gear RTA clone, Juggerknot Mini (plus a couple well made clones too) and more recently Juggerknot MR. The gear clone was trashily built, but enough to try the format and I wasn't terribly impressed; I like the more recent Druga RTA much better which is similar in size but produced...

I've not had this issue myself. I'd suspect 510 press fit might contribute more to this than firmware, or possibly the mod jumping the gun and reading resistance while still attaching the atomizer.

There have been a pile of gen issues - misreading coil resistance, STC being off, TC doing odd... pulsy... things... so far 1.4 and Gen S 1.0 have both been usable for me, I didn't run into issues with 1.5 but I only had it on there briefly, and I've been using the Gen S 1.0 since it was...

It was determined somewhere along the way that 1.4 (which wasn't initially publicly released) was doing it's job better than 1.5 so they pulled 1.5 and put up 1.4. Not long after they released "1.5" again, but it is actually the Gen S 1.0 firmware. Meanwhile, the PC (and mac?) software that was...

I posted a link to a mega folder I made of the copies I archived as Vaporesso released them back at post 242 in this thread. If you dig through this thread, around the same time I posted someone put the original link to 1.5...

PC: VaporessoV2.1.1_pc.zip Mac: VaporessoV2.1.1_mac.zip or if you really want the original 1.3 zip here is a folder with all the ones they've put up so far, minus the version of 1.2 with the non-english 1.5 PC installer.

I see 1.5 was pulled from the official site and 1.4 put in it's stead, though still packed with the 1.5 soft using a non-english installer. Not sure why they scrapped the 1.3 installer/software (2.1.1 app), as it's the only one that actually worked to customize the logos and whatnot (and still...

@CroVaper I did, I'm no longer getting a weak hit on first use after letting it sit for a random amount of time, but now I'm getting 'pulsy' TC like if I were to hold the button for half second bursts instead of just holding it like I actually am. Managed to get ahold of 1.4 and it doesn't seem...

@muth They just released 1.5 and it's a little better than 1.3 for DIY->VT, though I'm hearing there was supposedly a 1.4 via either support or some facebook fan group that had it mostly right... they never released it publicly.

@leocaldarelli there is no specific driver for the mod, Gen uses the HID driver framework which services many things including keyboards and mice. You'll need to look in device manager, as well as pay attention to whether windows is even noticing USB device arrival (typically it does so by...

@Zoro5 GEN_Ver1.2_v2.zip This is "_v2" (my add, their zip) because V1.2 was originally packed with V1.5 PC software with installer that was not in english, this has the 1.2 mod software and V1.6 PC software. That said, customization didn't work until v1.3, and only with the PC software that...

I can only say for sure that in my experience it's a symptom of an weak or incomplete contact somewhere which could also easily explain unstable TC performance. I don't see why it would be any less safe because of the buzz, unless the buzz is literally being caused by arcing somewhere it...

@Daovape yeah it's very quiet for me too, I have to put my ear near the mod to hear it with the PC fans going. Very little info I can find on those aside from the listing at namaste, and while they mention temp control they don't mention the wire material - but it looks to me like they are...

@Daovape the only time my Gen has buzzed was when I had it turned on and was taking the tank off, when the 510 center pin is barely making contact with the atomizer it gives off a rapid buzz when not firing. The same atomizer screwed on just slightly more doesn't produce this sound without...

You all do realize between the new years festival starting on jan 20 and going two weeks or so and the further stop work order issues due to wuhan coronavirus it's quite likely nothing is getting done in any immediate future... right? If anyone from Vaporesso is reading this: I hope you all are...

@AZ_Jeep if you go to the ingredients, then select the ingredient from the dropdown you can manually change the current available to the right of "inventory amount (ml)" or you can adjust the cost/volume mid right and click 'add to inventory' to add the new amount to the inventory amount.

@ej2_sir mine worked great in DIY TC from the time I got it to a couple days after updating to 1.03 and started doing the same, weak first TC hit then normal after that. I even flashed it back to 1.01 to see if that made a difference, and it did not - now contemplating tracing the ground path to...

If you go into tools->options it tells you where it's storing the data. In my case that is C:\Users\{username}\Documents\JuiceCalculator The title bar at the top will say the database name like (IIRC this was part of the first start questions) Recipe Calculator (file = somefile.xml) So that...

No problems here, have had mine apart many times while retaining the juice so long as the juice was below the juice ports when tipped upside down. I could see it being an issue if one were to put the staggered seal at the bottom instead of an o-ring maybe? I know the glass on mine "sticks" to...

Thanks to @Letitia I had my eye on a jk mini, missed a great sale (53CAD shipped) but stumbled onto an Ulton knockoff in a flash sale (17USD), was satisfied with my ammit 25, loved the intake despite losing a little flavor but this clone outdoes them both. I wish I hadn't missed that sale, QP...