Search results

Recurve is a spitting monster with a too-thick cap imo, try the Tauren instead, and nudge has a good deck but that alu cap is garbage sorry. Drop it once and goodbye. Recurve is a bit better with ribbon wire but a deemods solo stomps it really hard with the same coil flavour wise. Not convinced.

Dead rabbit was a no-no for me. Threw it away, which is something I don't usually do. Dead rabbit SQ is an ok squonk mod with decent, albeit muted flavor. 0 top notes. But, you can squeeze as hard as you want without worrying which is convenient. Drop is a fine rda with a single alien for me. I...

Back from 1 week holiday using the Reo and hobo in dual coil (had not much time to vape so I swapped quickly the O-16 for it to get quick nic fixes) I was a bit suprised when coming back home, that I now find it has better flavour than the SMM. It's just preference and habit after all. I was...

I don't know, the hadaly is good, and no question it has set a mark, but I find my mouth too close to the coil on all those short attys. I have tried like 20-25 attys now and I just can't reproduce the flavour I get from the serpent SMM on anything else. It bothers me because I prefer drippers...

Well you could just cut it short and fold it to the sides like if there were 2 coils, you would just have to squonk more often and the vape would be colder. Anyway, today I had a day off and tried like 20 builds on the hadaly, hobo, o-16, duals, single, every possible configuration. I'm in sort...

Alright I got this ! 6 wraps of 28g 316L on 2.5mm drill, cotton folded under it, .6 ohms cold but gets higher when vaping. It has throat hit, warmth, everything I like with a good dyi RY4/cuban cigar. The airhole it a tad restrictive tho but not adjustable on the speed revolution, not sure I...

I had a hobo V3.1 sitting on the shelf eying me since weeks but that I never bothered trying as it came without a squonk pin. Was a bit bored yesterday and started to play around, found the narda BF pin fits, throwed a quick dual 26g 7 wraps 316L at .3 ohms and wow... I guess it's the narda that...

And another (airy DL) success today with 5 wraps of staggered fused clapton (316L, 28x28/32) @.35 ohms, packed with cotton to reduce chamber size Airflow 3/4 open, has the same vape quality on the Reo and VT Inbox @240°C, only slightly longer ramp up. Still need a good MTL setup, will try...

How's the spitback? I have the feeling the mouth is really too close to the coil on the wasp by seeing it, never pulled the trigger because of that.

Alright I dialed restricted DL perfection on the O-16 for me today, 7 wraps of 316l on 2.5mm id for .45 ohms and the second biggest air holes. I'll leave that there and wait for the 2 others coming my way to build 1 for mtl and the other 1 with dual coil. .45 is not too bad on battery tho, so...

I keep an eye on everything for the Reo. Coil mass, wire length, heat flux, watts @3.7V (that's accounting for voltage drop + sag on a fresh battery). It seems I favor around 30-35W and 250-300mW/mm2 for DL on 22mm attys, inside that window I adjust airflow to make it hotter or cooler so I try...

parallel Kanthal A1 28g on 2.5mm gives exactly 4 wraps and .4 ohms but 370mW/mm2 at 3.7V that's quite "insane" (no offense meant;)) I MTL around 220-240

I'd say you can't go wrong with a Narda, Hadaly or O-16, but you can also make them perform badly :) Been there, done that, ordered like 12 different clones and now I'm down to perfecting the build on those 3 only and leave the rest on the shelf. That's the key here, lots of trial and error...

I put that in steam engine and it's a very, very high heat flux, don't know how you MTL that without burning everything :scratches head:

I get it to work pretty good because the cotton and post funnel the air to the coil, but I agree coil height makes a lot of difference. Top air RBAs... yeah gave up (but didn't throw away... yet) the pulse 22, I don't "get it". It's just cold no matter what. I love the airflow of the serpent...

Got some more time to play today. I understand what I've been doing wrong all this time : thinking "it's not for .05 ohms / 1 wrap" but actually .45 is night and day with .4 ohms on a mech (or one wrap difference), it's not the same mass, heat flux, 5W difference, granted on a big clapton...

Thanks layzee. Yes it's what I like what counts, just polling for experience as I don't have much time those days, friday is off tho will spend time on it. One build a day in the quest for Nirvana : 6 wraps of 28 ga 316L @.65 ohms cold. I'm not too comfortable building the coil on one side as...

I really have no time for that... maybe when I'll be retired in 30 years haha I just buy them prebuilt

Yeah well I'm already thinking about the future... the more I use the O-little the more I love it, it has this "condensed wet" vape quality I love, I'd love to have 3 reos each with an O-little on it, one with dual coil for "those days" or when I feel like a power vape, one with single .5 for...

Tried 1 ohm 30g 316L today on the speed revolution, and while getting there it's not quite like it still. I suspect that as resistance of 316L increases with heat, while a good thing for DL it's bad for MTL. Will go back to kanthal A1 28g for that atty and see what it gives. It's such a...