Search results

  1. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    I can now report that the Brunhilde is perfectly pocket-friendly. I do think having enough density of cotton is critical for this though. Originally when I had a 2.5mm coil, I would get some pooling after holding it sideways for a while. Since swapping to a 3mm, the extra cotton has prevented...
  2. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    Figured you're the best person to ask: how pocket friendly is the Brunhilde? I get pooling in the deck just from laying it on its side for 10 minutes. I feel like this would not work well in my front jeans pocket when sitting. Is there some magic wicking method to avoid this?
  3. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    Today I finally received the Brunhilde MTL RTA and Alberich. So far the Brunhilde has been awesome, making it clear competition for my favorite of the bunch! I've been back and forth between the Brunhilde and Dvarw all day. These two RTAs were both incredibly easy to build, wick, offered great...
  4. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    Small update in my quest for a new RTA. I've been vaping the Dvarw for a week now and really enjoying it. Having a 6ml tank is awesome! Minor annoyance is how many times I made a mess because I forgot to replace the metal cap after a rewick. After going back and forth between 2mm x 1 and 1.2mm...
  5. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    After the replies, spending some time going over reviews, and seeing that Sourcemore has my top picks on sale, I caved and went on a bit of a shopping spree. In addition to a Dwarw MTL FL 24 clone, I now have a Brunhilde MTL, Alberich, and Pioneer 1.5 on the way. I'll be sure to post my...
  6. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    I guess considering how cheaply they can be purchased it doesn't hurt to try, though I still feel like I will never want to leave the house with a Brunhilde MTL. But if we're on the subject of Kayfuns, I haven't considered using them as a benchmark for a while despite owning the v1, 4, and...
  7. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    Found this one in my drawer of old vape stuff I haven't used in years. So you're telling me I don't need to worry about it looking like this? :lol: Just in case you were wondering, no it never left the house in that configuration.
  8. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    Thanks for the reply. I don't know how I feel about that height and the coil being so close to the drip tip. Does it vape hot? But mainly the height! I'm so used to short tanks with bubble glass. I feel spoiled by the Galaxies and MD. My MD is 40mm tall including the drip tip. Also added some...
  9. ChaoticKinesis

    Looking for MTL/RDL RTA recommendations coming from Hellvape MD

    I've been using the Hellvape MD for a couple years and am generally happy with it but looking for something new that's best used right on the border of MTL and RDL. For reference, I use the MD with the airflow set to 5 (1.8mm diameter) and with the wide-bore drip tip. Usual build is a 28g/40g...
    • ChaoticKinesis
    • Thread
    • mtl rta recommendations restricted dtl
    • Replies: 23
    • Forum: RTA
  10. ChaoticKinesis

    Ended Prizes! 15 millionth ECF post...

    Awesome, thanks for the reply and for all your work!
  11. ChaoticKinesis

    Ended Prizes! 15 millionth ECF post...

    So how is it that the current link to the last post right now contains "post-15851218" in the URL? Does the system skip ids when posts are generated or did they not start from 1?
  12. ChaoticKinesis

    SvoёMesto KAYFUN 4

    I had this happen when I first got my K4 but it went away on its own after a week or two.
  13. ChaoticKinesis

    SvoёMesto KAYFUN 4

    Thanks everyone for the replies! The main thing I took away from these is to make sure the cotton is fluffy, filling the chamber with minimal density, and that the wicks are just long enough to reach the deck. After making my wick thicker than before, peeling away the top layer for the first...
  14. ChaoticKinesis

    SvoёMesto KAYFUN 4

    I recently switched to Koh Gen Do for my K4 wicks and can't seem to get the wicking right no matter what I do. When I was using normal organic cotton it was fine but this one I can't get right. I've experimented with different thicknesses and lengths. I recently moved up from 5/64" to 3/32" to...
  15. ChaoticKinesis

    Kayfun SOV V2 glass kit issue

    Just wanted to follow up on this. I have received a replacement glass tube from SOV and it works perfectly now. The glass was in fact about 1/16" too short. Thanks so much for your help!
  16. ChaoticKinesis

    Kayfun SOV V2 glass kit issue

    Thanks Doug for writing about your experience. Incidentally, I received confirmation from someone else that the glass height should be 15/16" while mine is only 13/16" so I think in this case it is in fact the glass. I purchased it from Vapetribe, who claimed there was nothing wrong with it and...
  17. ChaoticKinesis

    Kayfun SOV V2 glass kit issue

    Can't believe I didn't think to ask this sooner but can anyone confirm for me what the height on the glass is supposed to be?
  18. ChaoticKinesis

    Kayfun SOV V2 glass kit issue

    Sure, everything can potentially be put together correctly if I remove pieces. The problem is that when fully assembled the tank isn't long enough to accommodate the chimney. What bothers me most about this is that SOV doesn't reply to emails or messages on Facebook. :(
  19. ChaoticKinesis

    Kayfun SOV V2 glass kit issue

    I have one genuine Kayfun and one Russian 91% but the issue has nothing to do with the base. The only original part that has anything to do with height of the constructed kit is the bottom part of the chimney, which is the same on both atomizers. The issue is that the fully assembled kit (bottom...
  20. ChaoticKinesis

    Kayfun SOV V2 glass kit issue

    The first picture is a real Kayfun Lite+. I just happened to have juice in my Kayfun at the time the second fitting took place but I previously confirmed the heights of all parts to both atomizers to be the same. I have previously considered whether it was a machining issue. I'm not sure how...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu