◙ Li’l PINCH (←thang) ◙ pdib (←maker) ◙ not sayin’ (←just sayin’) ◙ shuh-ZAM! (←hyperbole)

[CaptSteve]

It's called "pimp my atty" Aal

Dimitri sent some g@y pride pink one's to Busardo a while back

 

[penguiness]

And now... on a different station...

Finally got a little sun around here:

And the start of a li'll pinch family:

And the dibi family is growing:

I already knew how to set it up thanks to personal lessons from the BeeModMaster himself but when I received this latest one all I had to do was screw it in and go.

Thanks again Peter!

I love my li'll blue pinch, this one's got a hair trigger.

Wonderful variety you have there, X-Puppy. They are all perfect in every way

 

[X-Puppy]

That's just mean puppy boy. Nice collection you got there.

By the way, what's the purpose of those elastic bands you guys put on atomizers?

Those are silicone Vape bands. I slide it down to block my air holes before I put it in my pocket. Keeps it from leaking in my pocket.

People use them for dress up too.

 

[MFarley]

They say you can tell a lot about a person by what they buy.
When I look at this photo it looks like a progression from conservative to a bit more adventurous to really unusual.
Is there something going on that we don't know about X-Man?

 

[pdib]

Hi Keith!

(pssst . .. . unanswered question in 4 day old PM)

 

[X-Puppy]

They say you can tell a lot about a person by what they buy.
When I look at this photo it looks like a progression from conservative to a bit more adventurous to really unusual.
Is there something going on that we don't know about X-Man?

I'm hunting for another block of wood!

Haven't found one that peaks my interest yet. Still looking...

 

[Gigdujour]

Those are silicone Vape bands. I slide it down to block my air holes before I put it in my pocket. Keeps it from leaking in my pocket.

People use them for dress up too.

I thought they were little isometric exercise bands for the mods so they could hit harder over time [emoji6]


Master of Bassets...and not much else

 

[RattlerX]

And now... on a different station...

Finally got a little sun around here:

And the start of a li'll pinch family:

And the dibi family is growing:

I already knew how to set it up thanks to personal lessons from the BeeModMaster himself but when I received this latest one all I had to do was screw it in and go.

Thanks again Peter!

I love my li'll blue pinch, this one's got a hair trigger.

DAYUM!!!! .....thats all I got to say about that

 

[B2L]

And now... on a different station...

Finally got a little sun around here:

And the start of a li'll pinch family:

And the dibi family is growing:

I already knew how to set it up thanks to personal lessons from the BeeModMaster himself but when I received this latest one all I had to do was screw it in and go.

Thanks again Peter!

I love my li'll blue pinch, this one's got a hair trigger.

Exquisite, every last one of 'em

 

[keithu2]

Hi Keith!

(pssst . .. . unanswered question in 4 day old PM)

I see'd it.
My only excuse is the root canal I had on Saturday . . . .

I gots my 'pinch yesterday, but only had time to watch the video and read the instructions again. However, I did reassemble the dna squonker and look at a Holiday Inn. . . . .

 

[pdib]

I see'd it.
My only excuse is the root canal I had on Saturday . . . .

I gots my 'pinch yesterday, but only had time to watch the video and read the instructions again. However, I did reassemble the dna squonker and look at a Holiday Inn. . . . .

great! now I'll never tease anyone again for fear that they were having a root canal!


. . . . or nothing on under their kilt.

OK, sorry, didn't mean to rush you there, Keith. Hope you weren't in too much pain before the drillin'.

 

[Alexander Mundy]

I see'd it.
My only excuse is the root canal I had on Saturday . . . .

I gots my 'pinch yesterday, but only had time to watch the video and read the instructions again. However, I did reassemble the dna squonker and look at a Holiday Inn. . . . .

Hope all went well with the root canal. At least that pain (before the dentist relieves the pressure) is something I'll not have to worry about again......although I did have loose sliver of bone work it's way to the surface of my palate removed by the dentist this afternoon. Amazing how such a small thing can cause such pain.

 

[keithu2]

Hope all went well with the root canal. At least that pain (before the dentist relieves the pressure) is something I'll not have to worry about again......although I did have loose sliver of bone work it's way to the surface of my palate removed by the dentist this afternoon. Amazing how such a small thing can cause such pain.

Thanks, it went better than I thought it would. A little disconcerting to have a wedge, drape, and all kinds of tools in your mouth though . . .

and I'm going to need a crown and an implant/bridge also.

 

[CaptSteve]

I had an interesting thing happen today. As I was changing coil on one of my Nuppin's I went to tighten the negative grub screw on the side of the Nuppin with my 0.35 Hudy allen wrench and the tip or the allen wrench broke off and got stuck in the grub screw. It was probably cracked because I didn't tighten it excessively.

I've tried getting the tip of the wrench that broke into the grub screw out but it's not giving. I have lots more grub screws (Peter sent 2 with each Nuppin) but I'm kinda stuck as to how to get the little critter out from the side of the Nuppin. I thought of drilling it out but it's so dayum small I'm kinda worried it will either brake the drill bit or worse still damage the threads in the Nuppin.

Anyone have any fine ideas as to how to handle this little conundrum ?????

May just try freezing it to see if it will help it come out due to metal contraction

 

[TamiPac]

I had an interesting thing happen today. As I was changing coil on one of my Nuppin's I went to tighten the negative grub screw on the side of the Nuppin with my 0.35 Hudy allen wrench and the tip or the allen wrench broke off and got stuck in the grub screw. It was probably cracked because I didn't tighten it excessively.

I've tried getting the tip of the wrench that broke into the grub screw out but it's not giving. I have lots more grub screws (Peter sent 2 with each Nuppin) but I'm kinda stuck as to how to get the little critter out from the side of the Nuppin. I thought of drilling it out but it's so dayum small I'm kinda worried it will either brake the drill bit or worse still damage the threads in the Nuppin.

Anyone have any fine ideas as to how to handle this little conundrum ?????

May just try freezing it to see if it will help it come out due to metal contraction

That makes me cringe, every Nuppin owners worst nightmare! Sorry that happened.

 

[CaptSteve]

Thanks Tami, it's no biggie (just a PITA), I'll get that grub screw out one way or another even if I have to perform micro surgery

 

[TamiPac]

Thanks Tami, it's no biggie (just a PITA), I'll get that grub screw out one way or another even if I have to perform micro surgery

Whilst you tend to that Dr. Steve, I'll be in the air on my way to Seattle.

 

[CaptSteve]

Whilst you tend to that Dr. Steve, I'll be in the air on my way to Seattle.

Ahh good you finally decided to storm the Bee's workshop

Blue skies to ya

 

[TamiPac]

Ahh good you finally decided to storm the Bee's workshop

Blue skies to ya

Thank you, I'll be happy if the person next to me doesn't stink and doesn't want to tell me their life story!

 

[CaptSteve]

Yeah well you never know what you'll get