• What's your favorite mod?

    Interested in seeing what everyone has owned/tried!

    View thread

◙ Li’l PINCH (←thang) ◙ pdib (←maker) ◙ not sayin’ (←just sayin’) ◙ shuh-ZAM! (←hyperbole)

Status
Not open for further replies.

B2L

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Jan 14, 2012
7,844
44,419
Jacksonville, FL
i didn't make the list :cry:

although adding DLS to brisbane 6 months of the year isn't hard [funny state, they think dairy cows will need therapists if they start it]

It was the closest I could find on the available Australian cities Doff so... Brisbane is actually you :thumb:
 

X-Puppy

Cloud Hound!
ECF Veteran
Verified Member
Sep 13, 2013
2,262
12,481
Marysville, Washington, USA
Doffy is closer to the Bee Hive than I thought once you wrap the map round the planet. :)

Still a few hours difference and a bit of weather change. I know its a 3hr difference from here to Hawaii. (And a bit of a weather change) :D
 

Doffy

Vaping Master
ECF Veteran
Verified Member
Mar 15, 2014
8,220
40,855
Australia
Doffy is closer to the Bee Hive than I thought once you wrap the map round the planet. :)

Still a few hours difference and a bit of weather change. I know its a 3hr difference from here to Hawaii. (And a bit of a weather change) :D

like a Mad Fold-in?
 

Gigdujour

Ultra Member
ECF Veteran
Verified Member
Jun 9, 2013
1,919
12,133
Michigan
All your talk of Mulcibers inspired me to snag one for myself.
e09ce7bdc30c3ab91d3752711b3e4480.jpg

I'm quite impressed so far. Really good flavor and it wasn't too tough to build ( once I tracked down my teeny tiny flathead screwdriver). I discovered after the fact that the nice man I bought it from had also included some of the better screws. It'll give me something to do if I decide to change up the coil I have in there.
978b0886278c9803208851ed3102764d.jpg


I'm running 7/8 wraps of 24ga SS316 on a 3/32" bit. I'm pretty sure it's around .4ish ohms although it does seem a tad warmer than the same coils in my Nuppins [emoji848] Overall though, well worth the $50 [emoji3]


Master of Bassetts
 

67Tele

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2014
2,868
8,786
Austin
All your talk of Mulcibers inspired me to snag one for myself.
e09ce7bdc30c3ab91d3752711b3e4480.jpg

I'm quite impressed so far. Really good flavor and it wasn't too tough to build ( once I tracked down my teeny tiny flathead screwdriver). I discovered after the fact that the nice man I bought it from had also included some of the better screws. It'll give me something to do if I decide to change up the coil I have in there.
978b0886278c9803208851ed3102764d.jpg


I'm running 7/8 wraps of 24ga SS316 on a 3/32" bit. I'm pretty sure it's around .4ish ohms although it does seem a tad warmer than the same coils in my Nuppins [emoji848] Overall though, well worth the $50 [emoji3]


Master of Bassetts

I agree. Went through a little Goldilocks thing with it at first. I had the single slotted AFC on and my regular matchy-matchy 3/8" tall driptip in. The flavor was muted. Tried it without the tip and it was too warm. Changed to the dual AFC and dug around in my tip tin and found an ittybitty tip with a little wider bore. This setup works.

@CaptSteve With the dual airflow wide open it's fairly airy. More than a Narda. Comparable to a Hadaly. Flavor density is similar to the Nuppin/Narda/Hadaly.

1-20170623_112056_8_bestshot.jpg
2-20170623_112210_7_bestshot.jpg


Mine's also 24ga 2.5mm around .5-ish
 
Status
Not open for further replies.

Users who are viewing this thread