scott, is your order shipped, if not, email them right now, to hold your order for ceramics.
2nd Edition Cartomizers - Won't sell to US now !!!
- Thread starter Craymar
- Start date
- th_trl_thread_readers 0
- Status
scott, is your order shipped, if not, email them right now, to hold your order for ceramics.
The word that I have right now is that anyone who has an order in that has not shipped will be getting the ceramic cup version. This is only for the US orders. They are also fixing the connectors so they're more universal. So you're orders that are processing, will be processing for a bit longer, but you should be getting the latest revisions with the new connectors and ceramic cup.
wow, freaking amazing, thank god, well now some folks can rest a little easier. there you go guys.
It's crazy. nobody ever knows what they are getting when they order.
I hope they don't mean that literally. If they make them exactly for a Joye 510, then it will be universal.
well actually the last word was that everyone who ordered form the 21st on would recieve the revision with the looser coil and the wider slits and thicker plastic.
Since then it was advised to them to use ceramic cups like in regular atomizers and they agreed, also during this period after the 21st we asked for higher ohm version in the 510 and 808 and we asked for XL version of both with higher ohms so we can use them on 3.7 devices for a tad cooler vape(some like the warm).
So after asking for all those things a few days later we where told by them that they made them in XL with higher ohms and all the fixes with the coil and ceramic cups. SO they actually did alot in the last week and a half.
If you ordered in the last few days or if your order hasnt shipped then it will be held back so you can receive the latest and greatest.
Last edited:
Apparently not because they did make them for the Joye 510. They worked with joyetech on the connectors.
China's like a box of chocolates, you never know what you're gonna get.
(but as long as they work I don't care)
(but as long as they work I don't care)
Fixing the connectors is currently my biggest hope. These are the only 510 parts that haven't worked with all the different 510 parts that I have. Comparing a Joye 510 atty connector to these, there is a very big difference.
I just a box of these from VaporJunction. Dated June 16 on the box. After filling with RY4 and screwing it on my Riva, I have to say it's pretty good. Huge vapor production and taste seems right on. I'm new to vaping, but I'm very much liking these. If anything, it seems more flavorful than even dripping.
it says he has 10 packs left. and yes im sure they will all be getting the newest revision with ceramics soon.
The carts I received today are also dated 6/16 the 3 holer cart. These are right on the money so far. I was amazed at the vapor, HUGE, taste was great, and I can hit it hard and often without any drop-off. They have worked on the GG, SB, BB and Super 6, without any problems. I did pop a couple at 6 volts, but I think they were dry I don't have a syringe, so on the 3rd one I popped out all the plastic and made sure of my fill, haven't had a problem since.
I received my order of the older version Saturday and have worked on 3 Cartomizer from the first of 4 packs. Had some sucess but just not right so I did not try them at work today. When I got home I wanted to try some ECOpure juice I had and opened the second pack. When I got the juice loaded up the threads were boogered up and it would nor screw onto my EGO Battery. I had a standard 510 charged up and the threads were worn enough to allow the cartomizer to seat up properly so all is good.
Now I know what all the hype is about, when these things get the minor issues fixed they will take over the industry as the standard vaping device. Even with the ECOpure which I don't care for the vapor is so much better I can not put it down. Just my
In my opinion it just proves we needed all the heavy flavoring to make up for the poor quality of vapor produced by the old style attamizers which was wet and high voltage made it hot and I believed that to be normal. The CE2 give me a moist warm vapor that just just rolls out like a big cloud and will blocks your monitor at times..pardon mis-spelling..lol
I had place my order of the new version yesterday and thought they were going to be OK. But if they work as well as this one has I will be a sold customer for life.
Thanks to all the guys in this thread that keep on pushing to make this product better.
Now I know what all the hype is about, when these things get the minor issues fixed they will take over the industry as the standard vaping device. Even with the ECOpure which I don't care for the vapor is so much better I can not put it down. Just my
In my opinion it just proves we needed all the heavy flavoring to make up for the poor quality of vapor produced by the old style attamizers which was wet and high voltage made it hot and I believed that to be normal. The CE2 give me a moist warm vapor that just just rolls out like a big cloud and will blocks your monitor at times..pardon mis-spelling..lol
I had place my order of the new version yesterday and thought they were going to be OK. But if they work as well as this one has I will be a sold customer for life.
Thanks to all the guys in this thread that keep on pushing to make this product better.
wow, nice to hear you guys are happy and its not even the latest and greatest version. I agree like I have said many times, once they iron out the issues then they will change the industry forever. the design is innovative and the initial issues are NOT design related persay, they just needed to loosen the coil, open the slits more and higher the ohms(for some people), and change the glue they use.
I think once people start to receive the newest versions with higher ohms plus all the fixes and ceramics then we will see the true excitement over these e2 cartos.
I think once people start to receive the newest versions with higher ohms plus all the fixes and ceramics then we will see the true excitement over these e2 cartos.
One thing I don't like.....these things have stickers around the carto to make it matte black colored. The ends of them peel off a little bit and are annoying. Solved by using my drip tip on it, but still......
Several of mine have done that too... usually around the end of the carto. I just take the mouthpiece out and trim around the edge with scissors.
yeah i know, thats why im only ordering stainles steel form now on, i got blue and SS and i hate the stickers but the stainless steal is shiny and nice and its not like when you remove the sticker, these are much brighter and shiny.
they make painted versions with no stickers but you have to buy from royal smokers and thats a special order.
Alas, poor CE2 510 #1 I knew ye well. *sniff*
Took cleaning #3 a bit too far I guess. Carto #1 went out in a blaze of glory during an extended dry-burn. He is survived by 119 brothers and 30 sisters.
In lieu of flowers the family requests that mourners become supporting members of ECF to promote the future development of safe and effective vaping accessories.
Took cleaning #3 a bit too far I guess. Carto #1 went out in a blaze of glory during an extended dry-burn. He is survived by 119 brothers and 30 sisters.
In lieu of flowers the family requests that mourners become supporting members of ECF to promote the future development of safe and effective vaping accessories.
Such a sad sad day, how old was he when he passed, my best wishes the family.
my eldest son is at 9 days.
- Status
Similar threads
- Locked
- Locked
