300W Hyper Mods Roundtable Discussion and Contest
- Thread starter AlmightyEvan
- Start date
- th_trl_thread_readers 0
- Status
4. What kind of material are you using as your wick, cotton, rayon?
I always use cotton
I always use cotton
1. Do you think is there really necessary to have a 300w output power mod?
Necessary? No, not at all. Fun? Certainly... Kinda like having a car that will do more than 100 MPH. Almost never get to use it, but it's fun knowing it's there... The other part of the equation is the insane battery life that these mods provide.
Necessary? No, not at all. Fun? Certainly... Kinda like having a car that will do more than 100 MPH. Almost never get to use it, but it's fun knowing it's there... The other part of the equation is the insane battery life that these mods provide.
2. Let us know the highest output power mod you have/had
I have the Ijoy Maxo 315 and the Koopor Primus 300. In fact, the Koopor is currently in my pocket... been vaping on it this morning...
I have the Ijoy Maxo 315 and the Koopor Primus 300. In fact, the Koopor is currently in my pocket... been vaping on it this morning...
3. Among the 4 mods we listed above, which do you like? Why?
I like them all lol, but if I had to choose just one from the list, I think the Smok GX350. I've had good luck with Smok mods (since the disaster that was the XPro M80 Plus). Further, I think that the ability to run in 2 battery mode is nice... I'm all about versatility... I know that the Reuleaux doesn't allow that. I don't see anywhere that the Anyvape allows it (nice to see Anyvape still in the game, though), and I know that the Ijoy allows it, but the Smok tops out at 220 in 2 battery vs. (I think) 160 in the iJoy...
I like them all lol, but if I had to choose just one from the list, I think the Smok GX350. I've had good luck with Smok mods (since the disaster that was the XPro M80 Plus). Further, I think that the ability to run in 2 battery mode is nice... I'm all about versatility... I know that the Reuleaux doesn't allow that. I don't see anywhere that the Anyvape allows it (nice to see Anyvape still in the game, though), and I know that the Ijoy allows it, but the Smok tops out at 220 in 2 battery vs. (I think) 160 in the iJoy...
4. What kind of material are you using as your wick, cotton, rayon?
I have a desk drawer dedicated to wicking. In that drawer, you'll find Labo Puffs Japanese Organic Cotton pads, Walgreens Organic Cotton Balls, Cotton Bacon 2.0, Native Wicks Platinum, Silica (Ekowool), Rayon (Cellucotton), Stainless Steel mesh in about 4 grid sizes, Stainless Steel Cable, Organic Cotton yarn, and a small packet of degummed hemp that will never, ever, ever be touched again (blech!). I use all of the wicks for different purposes... sometimes, though, the choice is based entirely on laziness and I grab whatever is on top...
I have a desk drawer dedicated to wicking. In that drawer, you'll find Labo Puffs Japanese Organic Cotton pads, Walgreens Organic Cotton Balls, Cotton Bacon 2.0, Native Wicks Platinum, Silica (Ekowool), Rayon (Cellucotton), Stainless Steel mesh in about 4 grid sizes, Stainless Steel Cable, Organic Cotton yarn, and a small packet of degummed hemp that will never, ever, ever be touched again (blech!). I use all of the wicks for different purposes... sometimes, though, the choice is based entirely on laziness and I grab whatever is on top...
1. Do you think is there really necessary to have a 300w output power mod?
I don't think it's necessary, but I love the longer battery life from the higher-wattage devices.
I don't think it's necessary, but I love the longer battery life from the higher-wattage devices.
2. Let us know the highest output power mod you have/had
The highest output mod I have right now is my RX200.
The highest output mod I have right now is my RX200.
3. Among the 4 mods we listed above, which do you like? Why?
I think I like the SMOK GX350 best. It's a very nice looking device, and it seems to be the most versatile.
I think I like the SMOK GX350 best. It's a very nice looking device, and it seems to be the most versatile.
4. What kind of material are you using as your wick, cotton, rayon?
I am all about the ceramic coil! I love the hybrid cotton/ceramic coils for flavor and clouds, but I also love the pure ceramic coils because the flavor lasts for so much longer than cotton coils, and they are very easy to clean.
I am all about the ceramic coil! I love the hybrid cotton/ceramic coils for flavor and clouds, but I also love the pure ceramic coils because the flavor lasts for so much longer than cotton coils, and they are very easy to clean.
1. Do you think is there really necessary to have a 300w output power mod?
No. Although having a higher top end for power also typically means that using the mod at lower power levels will result in a longer battery life.
No. Although having a higher top end for power also typically means that using the mod at lower power levels will result in a longer battery life.
2. Let us know the highest output power mod you have/had
All of my mods are dual battery mods, so they are all in the 160-215 watt range, with the highest being 215 watts.
All of my mods are dual battery mods, so they are all in the 160-215 watt range, with the highest being 215 watts.
3. Among the 4 mods we listed above, which do you like? Why?
For me it would be a toss up between the iJoy and the Smok. I like the choice of colors and the tapered shape of the mod will make it fit in the hand better. The shape will also make the mod feel smaller than it really is. The square form factor of the Wismec and the VapeOnly will feel bigger in the hand.
For me it would be a toss up between the iJoy and the Smok. I like the choice of colors and the tapered shape of the mod will make it fit in the hand better. The shape will also make the mod feel smaller than it really is. The square form factor of the Wismec and the VapeOnly will feel bigger in the hand.
4. What kind of material are you using as your wick, cotton, rayon?
If I am rebuilding prebuilt coils, I will use cotton since cotton pads are formed better and makes it easier to work with. If I am wicking coils in a RDA or RTA, then I use rayon. Between cotton and rayon, I prefer using rayon since it has a cleaner taste and will last longer than cotton.
If I am rebuilding prebuilt coils, I will use cotton since cotton pads are formed better and makes it easier to work with. If I am wicking coils in a RDA or RTA, then I use rayon. Between cotton and rayon, I prefer using rayon since it has a cleaner taste and will last longer than cotton.
- Status
Similar threads
- Locked
