3FVape - New products & Deals Update

[GinaVape]

Original HCigar VT75 75W TC VW Variable Wattage Box Mod $76.99
The hcigar VT75 TC Mod is the next iteration of the hcigar dna series which borrows the same ergonomic 'C-Frame' design for perfect comfort from the HCigar VT40. It can offer max 75 watts and supports Ni / Ti / SS wires and also utilizes a well-defined TCR mode. The HCigar VT75 can be powered by either 1 x 18650 or 1 x 26650 battery (not included)


Nuke Hybrid Mechanical Box Mod Clone $18.79
The Nuke Hybrid Mechanical Box Mod Clone is constructed from resin and brass. It is powered by 1 x 18650 battery (not included) and features 510 hybrid threading connection.
Please note: this mod will be shipped in random color.


Goon 1.5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $7.99
The Goon 1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.This RDA comes with bottom feeder pin for Sqounk Mod.Many colors for you to choose.


Original GeekVape Ammit 25 RTA Rebuildable Tank Atomizer $22.99 after add to cart
The Ammit 25 is a larger version of the original Ammit RTA, with several distinct improvements. Compatible with higher wattage of up to 70w and a performance boost in both vapor and flavor production.


VGOD Elite Hybrid Mechanical Mod + VGOD Pro Drip RDA Kit Clone $22.99
Mod:The VGOD Elite Mechanical Mod Clone features a "flare grip" chassis with hard hitting copper construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch.
RDA: The VGOD Pro RDA Clone features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up.It features a durable stainless steel construction,dual bottom airflow, A low profile e-juice well.

 

[GinaVape]

Goon 1.5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.99

Monster V3 RTA Rebuildable Tank Atomizer Clone $4.99

Original Wotofo Serpent BF RDA Rebuildable Dripping Atomizer $25.99

Original GeekVape Tsunami Pro RDA Rebuildable Dripping Atomizer $27.50

Original Limitless Reactor Sub Ohm Tank Atomizer $25.99

SXK Billet Box Rev4 70W All-in-One Box Mod Kit Clone $85.00

Apocalypse GEN 2 Mechanical Mod + RDA Kit Clone $14.99

Original GeekVape Tsunami Mechanical Mod + Tsunami Pro RDA Kit $56.80

Original VapeThink Ten-in-One Kanthal A1 Pre-coiled Heating Wire Kit - (100 PCS) $20.99

Original VapeThink Ten-in-One Kanthal A1 Pre-coiled heating wire Trial Kit - (10 PCS) $1.99

Replacement Glass Tank Sleeve for Vandy Vape Kylin RTA - Transparent, 6ml $1.69

Replacement Firing Button for Broadside Style Mechanical Mod $0.99

Replacement Drip Tip for SMOK TFV8 / TFV8 Big Baby / TFV12 $3.59

 

[GinaVape]

Original YiLoong Gorilla 3D Printed Squonk Mechanical Box Mod $35.99
3D Printed Squonk Machine box,It features Sandblasting process Body and Embossing process printing,Side firing button & 510 threaded,Copper high connectivity,Powered by 1 x 18650 battery (not included);Removable juice bottle (13mL capacity bottle);Dimensions: 80mm x 45mm x 25mm


Original YiLoong SQ XBOX MOD-02 3D Printed Squonk Mechanical Box Mod $35.99
3D Printed Squonk Machine box, it features Sandblasting process Body and Hollow Design, Side firing button & 510 threaded, Copper high connectivity, Powered by 1 x 18650 battery (not included), Removable juice bottle (13mL capacity bottle).


Original YiLoong SQ XBOX MOD-03 3D Printed Squonk Mechanical Box Mod $35.99



Oringinal YiLoong SQ XBOX MOD-01 3D Printed Squonk Mechanical Box Mod $35.99



Oringinal YiLoong SQ XBOX MOD-01 3D Printed Squonk Mechanical Box Mod $35.99



AV Series Fast Twist Hybrid Mechanical Mod Clone $24.99
5 colors available, Amazing twisted shape, 510 hybrid threading connection, Aluminum construction, Hybrid Connection, Adjustable Magnetic Brass Bottom Firing Button, Powered by 1 x 18650 battery (not included)


SXK Replacement PC Tank for Doggy RTA Clone $1.99
PC Tank, Suitable for SXK Doggy RTA Clone


Kindbright Reload RTA Rebuildable Tank Atomizer Clone $11.99
The Kindbright Reload RTA clone is constructed from stainless steel in 24mm diameter. It features post-less deck design for single or dual coil build and gold-plated 510 positive pin. Comes with bottom side adjustable air slots for airflow control, you can enjoy better flavor and cloud. The RDA comes with a wide bore ULTEM drip tip.


YFTK Speed Revolution EXO RDA Rebuildable Dripping Atomizer clone w/ BF Pin $13.99
The ShenRay Speed Revolution RDA clone is constructed from 316 stainless steel and in 14mm diameter. It supports bottom feeder and features dual-pole design. Airflow controls via the sleeve.


Vapebreed RDTA Rebuildable Dripping Tank Atomizer Clone $10.99
The Vapebreed RDTA Clone is constructed from stainless steel (deck + top cap) and PEI (drip tip + tank sleeve) in 24mm diameter. It features dual-pole deck for single or dual coil build; and side adjustable air slots for airflow control.


Vapebreed RDTA Rebuildable Dripping Tank Atomizer Clone $10.99

 

[GinaVape]

Original Joyetech CuBox 3000mAh Built-in Battery Box Mod $19.99
The compact CuBox features one of the most elegant mod with visually stunning designs available. It is powered by an integrated 3000mAh battery and 2A quick charge. Cubox is applied with 510 stainless steel thread and wide border fitting for large capacity atomizers. The ventilation holes are placed on the bottom which can greatly help the device for better heat dissipation. 6 colors available.


Goon 1.5 RDA POM Rebuildable Dripping Atomizer Clone w/ Silver Deck $6.99
The Goon 1.5 RDA Clone is constructed from stainless steel (deck) and POM (drip tip + tank sleeve) in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip. PEI version also available.


Original Joyetech CuBox 3000mAh Built-in Battery Box Mod + CUBIS 2 Atomizer Kit $26.99
Battery capacity: 3000mAh; E-liquid capacity: 3.5ml / 2.0ml; Max output: 50W; Max charging current: 2A; Atomizer head: ProC-BF (0.6ohm) head / ProC-BFL (0.6ohm) head; Convenient e-liquid filling system, Adjustable top airflow control, 2ml TPD version included, Exquisite 510 stainless steel connector, Compatible with normal 510 mouthpiece. 6 colors available.


Original Joyetech CuAIO D22 1500mAh Built-in Battery Mod + CUBIS 2 Atomizer Starter Kit $19.99
Being all-in-one style, the Joyetech CuAIO D22 starter kit skillfully integrates a 1500mAh built-in battery and a 3.5ml / 2.0ml atomizer into one solid vape pen. It has a flip to open filling system and precision top airflow control. Being child-proof, close the airflow first then you're able to open the top cap to refill the e-liquid. Having the new ProC-BF series atomizer head, it provides a more restricted draw for mouth-to- lung vapers and pretty soft flavorful vaping clouds.6 colors available.


Original GeekVape Tsunami Mechanical Mod + Tsunami Pro RDA Kit $99.90
Mod: Diameter: 25mm; Resistance: 0.1~3 ohm; Voltage: 3.6~4.2V; Battery: 1 x 18650 battery (not included); Quick switch between 510 mode to hybrid mode; RDA: Diameter: 25mm; 25mm Large build deck allows convenient build with big coils; Adjustable airflow in both single coil and dual coil setup; Comes with wide heatproof drip tip & 510 drip tip adapter. Copper version also available.


FDX Rainbow Fast Flash LED Light Illuminator w/ Heat Sink for Electronic Cigarettes $7.59
The FDX Illuminator of Electronic Cigarette fits with RDA / RTA atomizer with 510 threading connector. This illuminator comes with rainbow fast flash LED light (colors do not light up at the same time, but change one by one). The light is powered by the mod, the LED will light up as fired.


510 whistle Flat Mouthpiece Drip Tip for RDA / RTA / Clearomizer - Green, Acrylic $1.49
This 510 Drip Tip is made from acrylic, and features a flat mouthpiece. PEI version also available.


Replacement Resin Firing Button + Silver Plated Cupronickel Contact for Broadside Mechanical Mod Clone $2.69
This replacement firing button is made from resin. The electrical contact is made from silver plated copper-nickel alloy (cupronickel). Both of them are suitable for Broadside Style Mechanical Mod.

 

[GinaVape]

Original Kanger Five 6 Sub Ohm Tank Atomizer $24.99
Kanger Five 6 Sub Ohm Tank, one of the best atomizers by Kangertech, features twist kangerTech patented design, humanized design top filling system, and selectable coils switch tank LED indicators. Kanger Five 6 utilizes Kanger Stainless Steel Tiger Coil (3 x 0.6 ohm in Parallel) Atomizer Heads for Variable Wattage or SS TC Mode.

Goon V1.5 RDA Rebuildable Dripping Atomizer Clone $7.59
The Goon V1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.

Goon 1.5 RDA Rebuildable Dripping Atomizer Clone w/ BF Pin $7.99
The Goon 1.5 RDA Clone is constructed from PEI (drip tip + top cap) + stainless steel (base) in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip. This RDA comes with bottom feeder pin.

Original Wotofo VAPOROUS RDA Rebuildable Dripping Atomizer $25.99
After the success of Serpent BF RDA, Wotofo presents us a new arrival Vaporous RDA. This 24mm RDA supports single or dual coils building with dual independent posts as well as a four wire holes build deck. The leak-proof embedded deck design makes Vaporous RDA a perfect choice for DIY. Vapors can enjoy wonderful vaping experience with the intense flavor and massive cloud production.

MMK Mechanical Mod Clone + Mini Comp Lyfe Battle RDA Clone Kit $21.99
Mod: The MMK Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). RDA: The Mini Comp Lyfe Battle RDA Clone is constructed from Brass with beautiful looks in 24mm diameter. It features comes with triple-post deck design, large build deck.

Original Tesla Terminator 90W Mechanical Box Mod + Antman 22 RDA Kit $25.99
Mod: Tesla's Terminator is a unique device that is simple to use and quite capable with its unregulated design. It utilizes a single 18650 battery and has a maximum wattage output of 90 watts. It supports atomizers as low as 0.10 ohm and has a maximum current of 30A. RDA: The Tesla Antman 22 RDA Atomizer features an easy no screw structure. It also has two large direct air slots to ensure smooth airflow. With the huge airflow on the bottom and top, it will bring you the best vaping experience.


YFTK Rap Fatty Wide Bore Drip Tip Clone for 528 Goon / Apocalypse GEN 2 / Druga / Skill RDA $4.29
Material: stainless steel; Height: 15mm; Outer diameter:24mm; Suitable for Goon / Apocalypse GEN 2 / Druga / Skill RDA; POM version alos available.

 

[GinaVape]

Original COV Callisto 80W TC VW Variable Wattage Mod $25.99
The Callisto Box Mod is constructed from zinc alloy and textured paint material, giving it fashion and delicate appearance. With ergonomic design of the battery, the max wattage reaches up to 80W. It has 3 kinds of TC modes (NI, TI, SS). It is very convenient to replace battery. This Callisto 80W will bring you stable, huge, durable vaping experience.


Original Asvape Lucifer 240W Mechanical Box Mod $124.99
Asvape Lucifer Mechanical Box Mod, powered by dual 18650 batteries, can reach up to a maximum output power of 240W. The box mod is constructed from stabilized wood, which looks amazing and is comfortable for holding in hand. Its top gold plating plates can assist the box to cool down. The top metal plate will become warm but not hot.


Mongrel Mechanical Mod Clone $20.99
The Mongrel Mechanical Mod Clone is made from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It comes with 510 copper conncetor.


Original Kanger DRIPEZ 80W TC VW Variable Wattage Mod Kit w/ E-juice Bump $49.99
The Kanger DRIPEZ Kit innovates e-liquid delivery system, which inherits the concept of squonker. It features unique top juice pump delivery system and two post RBA deck design. It adopts variable TC with wattage from 5W to 80W and requires 1 x 18650 battery. It uses push RBA design by pressing down on the posts to release and change coils


Original Yiloong Squonk Predator 80W 3D Printed VW Variable Wattage Box Mod $56.99
This is the first regulated 3D printed box mod in China by Yiloong Vape, the 80w Predator squonk mod. The 3D printed Predator mod is an regulated device with copper 510 connect to support a high efficiency and performance with a higher power 80w chip. Besides, the decent panel design with a real predator on its surface makes it different with stylish, fashion and classic high end.


Mulciber RDA Rebuildable Dripping Atomizer Clone $9.49
The Mulciber RDA Clone is constructed from 316 stainless steel in 22mm diameter. It comes with two posts design for single or dual coil build. The RDA has two airflow rings. Each airflow ring has two stacked slots for vertical or dual coil build and a single slot for more restricted airflow or single coil build. The RDA supports both bottom feeder dripping and normal dripping.


Goon 1.5 RDA Rebuildable Dripping Atomizer Clone $7.59
The Goon 1.5 RDA Clone is constructed from aluminum (top cap + tank sleeve) + stainless steel (base) in 22mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.


Original KAEES Solomon RTA Rebuildable Tank Atomizer $29.8
Original KAEES Vane Solomon RTA is constructed from stainless steel in 24mm diameter. It features top filling system and two posts deck for single or dual coil build. The RTA can hold 4ml e-juice. All part can be easily disassembled for cleaning.


Original Wismec Amor Mini Sub Ohm Tank Atomizer $9.99
The Wismec Amor Mini Tank was built especially for the Wismec RX75 MOD. The Amor Mini tank features a top fill design and bottom airflow for optimal sub ohm vaping. By rotating the airflow control valve of the atomizer base, one can easily adjust the airflow of the Amor. The more the slot is exposed, the larger the airflow. The Amor Mini has a 2ml tank capacity.


YFTK Rap Fatty Wide Bore Drip Tip Clone for 528 Goon / Apocalypse GEN 2 / Druga / Skill RDA $5.59
Material: brass; Height: 15mm; Outer diameter: 24mm; Suitable for Goon / Apocalypse GEN 2 / Druga / Skill RDA

 

[GinaVape]

AV Lyfe Dimple Hybrid Mechanical Mod Clone $23.99
The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from aluminum. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this mod will bring an amazing vaping experience to your vaping life! 4 colors available.


Original YiLoong Gorilla Box 3D Printed Squonk Mechanical Box Mod $35.99
The 3D printed Gorilla Box mod is an unregulated device that's copper 510 connect to support a high efficiency and performance. Besides, the hollow panel design makes it different with stylish, fashion and heat spread.


Original VAPJOY HITMAN RDA Rebuildable Dripping Atomizer $22.49
The HITMAN RDA 22 is designed for Pursuit of Flavor. It featured with 22mm diameter, 304 stainless steel material, and PEI inner cap. 810 connector offers wide option to try various drip tips for your own style. With top airflow control design, there is absolutely no e-juice leaking. The HITMAN RDA features an innovative build deck that supports single coil building, which is perfect for the vapers who chase clouds and pure favors. 2 colors available.


Nova RDA Rebuildable Dripping Atomizer Clone $7.99
The Nova RDA Clone is constructed from 304 stainless steel and in 24mm diameter. It features post-less design with a deep juice well and adjustable airflow control system. This RDA comes with a wide bore drip tip. 4 colors available.


Original Iwodevape Dropper Bottle for E-Juice Liquid $0.99
The original Iwodevape transparent dropper bottle is made of PET and can hold 60ml e-juice. 100ml version available.

 

[GinaVape]

YFTK Little Bang RDA Rebuildable Dripping Atomizer Clone with BF Pin $18.99
The YFTK Little Bang RDA Clone is constructed from 316 stainless steel in 18mm diameter. It features a two-post build deck design and adjustable airflow. The RDA comes with bottom feeder pin.


Original Digiflavor Bucho Sub Ohm Tank $28.00
Bucho is a flavor focused sub ohm tank designed by George Batareykin, carefully designed and engineered to produce the ultimate flavor with outstanding vapor production. Compatible with other easily accessible BVC coils of similar size. 25-35w for best flavor.


Original ADVKEN Gorge RDA Rebuildable Dripping Atomizer w/ BF Pin $24.99
The Original ADVKEN Gorge RDA Rebuildable Dripping Atomizer comes with stainless steel and PEI sleeve. It is a short flavor single coil RDA with simple coil building design and dual-bevel air holes. The bottom feeder pin design is more convenient for your bottom feeder mod.


SXK Billet Box Rev4 60W All-in-One Box Mod Kit Clone $129.00
The SXK BB Box Style mod is constructed from aluminum with an all-in-one design. It is powered by 1 x 18650 battery (not included) and maximum power output is 60W.The box mod is powered Evolv DNA 60 chip.


Original SMOKTech SMOK Vape Pen Plus 3000mAh Starter Kit $20.99
With 24.5mm diameter and 3000mAh capacity, pen style Vape Pen Plus on the basis of VAPE PEN, features with improved e-juice refilling system, bigger refilling slot and larger capacity, better taste is waiting for you. Innovation keeps changing the vaping experience!This product has two colors（Silver/Black) to choose.


Original Eleaf iStick Pico 75W TC VW Variable Wattage Mod + MELO III Tank Kit $38.99
The original Eleaf iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). With a compact size can fit perfect in your palm, much more convenient for usage and portability.This product has a variety of colors to choose.


510 Display Base Stand for RDA / RTA Atomizers $3.99
This base stand is made of epoxy resin. It is used to display or place RDA / RTA atomizers. It features 510 threading connection, which fits most standard atomizers.
This stand will be shipped in random color.


810 Wide Bore Drip Tip for RDA / RTA / Sub Ohm Tank Atomizers $4.59
This is an 810 wide bore drip tip made from acrylic. It is suitable for most atomizers like Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA. The connector is 12.5mm in outer diameter.This product has a variety of colors to choose.


510 Small Bore Drip Tip for RDA / RTA Sub Ohm Tank Atomizers $4.59
This is an 510 small bore drip tip made from acrylic. The connector is 8.5mm in outer diameter. The mouthpiece is 12mm in outer diameter. With the hollow center, this 510 drip tip will bring you good vaping experience!This product has two colors（Gold/Red) to choose.


Replacement Wide Bore Drip Tip for Aspire Cleito EXO Sub Ohm Tank Atomizer $2.45
This drip tip is made of resin. It is 15mm in outer diameter and 12mm in height. It is suitable for Cleito EXO sub ohm tank;
This drip tip will be shipped in random color.


Original Iwodevape Multi-functional Carrying Storage Bag for DIY $12.99
The Original Iwodevape Multi-functional Hang bag is a bag for you to carry vaping devices or DIY tools on the go. This durable, practical, portable bag is a good choice for all vapors.


Original Digiflavor Coil Head for Bucho Sub Ohm Tank $10.20
The Original Digiflavor Coil Head is designed for Bucho sub ohm tank. It has two resistance of 0.25 ohm (35~65W) or 0.55 ohm (30~40W) for you to choose.
This product comes with 5 PCS in 1 pack.


Display Base Stand for Mechanical Mod $2.99
This base stand is made of aluminum. It is used to display or place mechanical mod. The inner diameter is 28mm.


Original IJOY Torando TSS Coils Heating Wires for RDA / RTA Atomizers $4.99
The IJOY TSS coil is a pre-made stainless steel coil with spot welded nickel legs. It was introduced with the IJOY Tornado RTA, but it can work with many other devices

 

[GinaVape]

Avid Lyfe Fast Twist Gyre Series Mechanical Box Mod Clone with Copper Contact $34.99
The Avid Lyfe Gyre Box Mod Clone is a hard hitting mod powered by dual 18650 batteries (not included). The Gyre Box Mod is precision machined with state-of-the-art CNC machines out of aluminum. The Gyre Box Mod includes two fast twist gyre tubes. Each Gyre Box Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality.
This box mod is with copper negative battery contact.This profuct has many color to choose.
Please Note: Mod only, The RDA on the mod is not included.


AV Series Fast Twist Hybrid Mechanical Mod Clone + Avid Lyfe Captain Cap II RDA Clone $32.99
Mod:
The AV Series Fast Twist Hybrid Mechanical Mod Clone is constructed from aluminum. The Fast Twist style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This profuct has many color to choose.
RDA:
This RDA is combined with Avid Lyfe Wide Bore Captain Cap II top cap Clone and dual-pole stainless steel deck.
The Captain II Cap Clone is a precision machined top cap that is the perfect addition to your setup. The Captain Cap II features brass construction, 24mm diameter, dual chamfered air holes, and fits on the Battle deck, Torpedo deck, Tugboat Deck, and Mutation V2 and V3 decks.
The battle deck is made from stainless steel and in dual-pole design with 20mm diameter.


Coppervape Skyline RTA Rebuildable Tank Atomizer Clone $22.99
Please Note: This product will be shipped around June 22, 2017 (ETA, not guaranteed). The final shipping date depends on the manufacturer. We will try to get it delivered as soon as we can.
The new Skyline RTA, unites the preceded models of the same premium rebuildable atomizer. When it was necessary to make M2L or D2L decisions in older Versions of this Device, the new Skyline RTA combines both functions in an excellent way. So, ESG mods gives a selection of 10 different so-called "AirDisks" in order to satisfy the air supply for every taste for M2L as well as directly to the lungs in full. This allows the single-coil-atomizer to produce any desired vape experience depending on the daytime and mood. In the Skyline RTA you can also find the refill opening under the unscrewable top cap. A special feature is immediately apparent. The drip tip has a hexagonal connection at the bottom, which fits into the corresponding counterpart of the chimney. This controls the liquid flow. In the Skyline RTA, attention was paid to reliably replenishable refills.
Write a review
Earn up to $50 through our Product Review Program.



810 Wide Bore Drip Tip for 528 Goon / Goon LP / Kennedy / Battle RDA $3.99
The 810 Drip Tip is made from Azure Stone in 12mm height. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
This drip tip will be shipped in random color (1 piece).


Original GeekVape Cotton Balls for Electronic Cigarettes $1.99
The Original GeekVape Cotton Balls are made of 100% natural organic cotton, which are designed for DIY coil building.


Original Geekvape Kanthal A1 Heating Resistance Wire for RBA / RDA / RTA Atomizers $2.99
The Original GeekVape Kanthal A1 24GA Heating Resistance Wire is perfect for RBA / RTA / RDA atomizers. The wire is made from Kanthal A1. It features 24GA, 0.5mm diameter, which will be a good choice for DIY.


Original Geekvape SS316L Clapton Heating Resistance Wire for RBA / RDA / RTA Atomizers $4.59
The Original GeekVape SS316L Clapton Heating Resistance Wire is perfect for RBA / RTA / RDA atomizers. The wire is made from 316 stainless steel. It features 26GA + 30GA, which will be a good choice for DIY.


Original Geekvape Kanthal A1 Juggernaut Heating Wire for RDA / RTA $6.99
The Original GeekVape Kanthal A1 Juggernaut Heating Resistance Wire is perfect for RBA / RTA / RDA atomizers. The wire is made from Kanthal A1. It features (28GA + 38GA) x 2 + Ribbon (38GA x 24GA), which will be a good choice for DIY.


Original Geekvape N80 Clapton Wire Heating Wire for RDA / RTA $5.99
The Original GeekVape N80 Clapton Heating Resistance Wire is perfect for RBA / RTA / RDA atomizers. The wire is made from Nichrome 80. It features 24GA + 36GA, which will be a good choice for DIY.


Original Geekvape SS316L Clapton Heating Resistance Wire for RBA / RDA / RTA Atomizers $4.59
The Original GeekVape SS316L Clapton Heating Resistance Wire is perfect for RBA / RTA / RDA atomizers. The wire is made from 316 stainless steel. It features 26GA + 30GA, which will be a good choice for DIY.


Original GeekVape Fused Clapton 2 in 1 Pre-built Coil $4.99
The Original GeekVape Fused Clapton Pre-built Coil is made from Kanthal A1 and Nichrome 80 wires and features 0.25 ohm and 0.3 ohm. This pre-coiled heating wire comes with 24GA x 2 + 32GA, 26GA x 3 + 36GA coils. This heating wire will be a good vaping choice for DIY.
This product comes with 2 PCS in 1 pack.


Original GeekVape Framed Staple 2 in 1 Pre-built Coil $3.99
The Original GeekVape Framed Staple Pre-built Coil is made from Kanthal A1 and Nichrome 80 wires and features 0.2 ohm and 0.25 ohm. This pre-coiled heating wire comes with (26GA x 2 + 26GA x 2) + 32GA, (34GA x 5 + 32GA)+ 26GA x 2GA coils. This heating wire will be a good vaping choice for DIY.
This product comes with 2 PCS in 1 pack.


Original Smoke Kitchen Trix Alaska Bear E-juice Liquid $20.99
Smoke Kitchen TRIX "Alaska Bear" is an interesting mix of aromatic nutty taste with tart tobacco and sweet fruits with light freshness.This product also has different flavor for you to choose

 

[GinaVape]

Complyfe The Bolt Mechanical Mod Clone $14.99
The Bolt Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It comes with 4 vent holes on the top side and magnetic bottom firing button.


Boxer BF Squonk Mechanical Mod Clone $14.99
The Boxer BF Squonk Mechanical Mod Clone is a mechanical squonker without any voltage drop. Powered by 1 x 18650 (not included), the squonk bottle holds 7ml of e-liquid. The Boxer Style BF Squonk Mechanical Mod will not disappoint you if you want a hard hitting squonker for sub ohm builds.This product has many color to choose.


Original Sigelei Duo-3 2-Cover Version 235W TC VW Variable Wattage Box Mod $49.99 after add to cart
The original Sigelei Fuchai Duo-3 235W TC Box Mod dual battery cover version supports 2 / 3 x 18650 batteries (not included), deploying a fully upgradeable, advanced chipset with a maximum of 235W and comprehensive temperature control suite within a beautifully-crafted chassis.


Original SMOKTech SMOK TFV8 Baby Sub Ohm Tank Atomizer $19.99
TFV8 Baby, which size is 1/3 smaller than the Cloud Beast, TFV8. Meanwhile, its airflow system: the bottom pair air-slots, the air chamber, the drip tip, are re-designed after precise calculations and optimizations.


Mad Dog Mechanical Mod Clone + Mad Dog RDTA Atomizer Kit Clone $21.99
Mod:
The Mad Dog Mechanical Mod Clone is 24mm in diameter. Powered by single 18650 battery, it also features 510 adaptor, which enables it to work well with most of the atomizers in the market.

Atomizer:
The Mad Dog RDTA Clone is a 7ml huge juice capacity RDTA tank with 24mm diameter. It features side airflow system and easy building deck which supports both single coil and dual coils building for your different needs. Mad Dog RDTA can match almost any mod with the base. Perfectly compatible with Mad Dog RDTA Kit, it will bring you a long and excellent vaping experience.This product has many color to choose.


Original Xuan Feng Lou Desire Hybrid Mechanical Mod + Xuan Feng Lou 24mm RDA Kit $38.99
Mod:
The Original Desire Xuan Feng Lou Mechanical Mod is constructed from brass. It comes with 510 hybrid connection, 3 vent holes on the side, spring-loaded bottom firing button. Xuan Feng Lou mod has a unique design body for easy grib. Powered by 1 x 18650 battery (not included).
RDA:
The Original Desire Xuan Feng Lou RDA is constructed from brass in 24mm diameter. It features two posts design deck for easy coil building. It comes with flexible airflow control design with 6 air holes on the sleeve and 9-hole design on the top cap.This product has many color to choose.


810 Whistle Flat Mouthpiece Drip Tip for RDA / RTA / Clearomizer $1.49
This 810 Drip Tip is made from Acrylic, and features a flat mouthpiece. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.


SXK Replacement Tank for Billet Box Exocet Mod $7.99
The SXK Billet Box Exocet Replacement Tank Clone is constructed from PC and glass. It is designed for SXK Billet Box Exocet Mod.


Promoted 18650 Battery Extension Tube Clone for Mechanical Mod $11.99
The Promoted Battery Extension Tube Clone is made from brass and with copper contact. This tube holds one 18650 battery. It is a perfect 18650 stacked battery tube for Mechanical Mod.


Boxer BF Squonk Mechanical Mod Clone + Boxer RDA Kit Clone $20.99
Mod:
The Boxer BF Squonk Mechanical Mod Clone is a mechanical squonker without any voltage drop. Powered by 1 x 18650 (not included), the squonk bottle holds 7ml of e-liquid. The Boxer Style BF Squonk Mechanical Mod will not disappoint you if you want a hard hitting squonker for sub ohm builds.
RDA:
The Boxer RDA Clone is constructed from stainless steel in 24mm diameter. It features velocity style deck for single or dual coil build and side adjustable airflow design. The bottom feeder pin design is more convenient for your bottom feeder mod.This product has many color to choose.

 

[GinaVape]

Original Wismec Sinuous P80 80W TC VW Variable Wattage Box Mod $25.50
Please Note: This product will be shipped around July 15, 2017 (ETA, not guaranteed). The final shipping date depends on the manufacturer. We will try to get it delivered as soon as we can.
SINUOUS P80, a new flagship e-cig mod designed by sinuous designs, impresses us with its centered 510 connector and side OLED display. Powered by single 18650 cell, it reaches a mighty 80W output along with a sequence of other unique features including 2A quick charge, preheat and LED light with changeable colors.


Original GeekVape Tsunami Pro 25 RDA Rebuildable Dripping Atomizer original price $27.50,now only $20.59
The 25mm Velocity style large build deck allows convenient build with thick coils. Tsunami Pro RDA adopts adjustable airflow in both single coil and dual coil setup, optimized airflow hole position and staggered inner chamber to eliminate damage to the silicone ring. Comes with wide heatproof drip tip and 510 drip tip adapter.


Original Vapjoy Notch Sub Ohm Tank Clearomizer $12.48
The Notch Sub Ohm Tank is designed and manufactured by VAPJOY. It is assembled with a notch SS 0.3 ohm coil head that will produce great flavor. All the metal parts are carefully machined for high quality demand. It features 22mm diameter, 4ml juice capacity, top filling system and bottom airflow control system.


Taifun BT RTA Rebuildable Tank Atomizer Clone $17.99
The Taifun BT RTA Clone is made from 316 stainless steel and glass in 23mm diameter and holds 5ml capacity. The Taifun BT style RTA does not use traditional coils with wires but unbelievable durable stainless steel mesh with an extra-large surface for a brand new vaping experience, massive vapor clouds and flavor beyond words. This product has several other colors.


YFTK Spider RDA Rebuildable Dripping Atomizer Clone $20.29
The YFTK Spider RDA Clone is constructed from 316 stainless steel in 22mm diameter. It features 510 threading connection with adjustable center pin. Comes with dual posts deck and two middle air holes for airflow control.This product has several other colors.


Reload RTA Rebuildable Tank Atomizer Clone $10.99
The Reload RTA Clone is constructed from stainless steel in 24mm diameter. It features post-less deck design for single or dual coil build and gold-plated 510 positive pin. Comes with bottom side adjustable air slots for airflow control, you can enjoy better flavor and cloud. The RDA comes with an 810 wide bore ULTEM drip tip.This product has many color to choose.


SXK Taifun BT RTA Rebuildable Tank Atomizer Clone $21.90
The SXK Taifun BT RTA Clone is made from 316 stainless steel and glass in 23mm diameter and holds 5ml capacity. The Taifun BT style RTA does not use traditional coils with wires but unbelievable durable stainless steel mesh with an extra-large surface for a brand new vaping experience, massive vapor clouds and flavor beyond words.This item have several other colors.


Original Kanger Subtank Nano Sub Ohm Tank Clearomizer $18.99
The original Kanger Subtank Nano Clearomizer is made from stainless steel and glass in 18.6mm diameter. It features 3ml capacity and enhanced adjustable airflow system. Kanger Subtank Nano comes with two Organic Cotton Coil heads (OCC), one at 0.5 ohm and the other at 1.2 ohm.


AV Series Fast Twist Hybrid Mechanical Mod Clone + Battle RDA Kit Clone $30.99
Mod:
The AV Series Fast Twist Style Hybrid Mechanical Mod is constructed from aluminum. The Fast Twist style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!
RDA:
The Battle Style RDA is constructed from stainless steel in24mm diameter. It comes with dual-post deck, aluminum top cap and drip tip.This item has several colors to choose.


Original Wismec Sinuous P80 80W TC VW Variable Wattage Box Mod + Elabo Mini Tank Kit $39.90
SINUOUS P80, a new flagship e-cig mod designed by sinuous designs, impresses us with its centered 510 connector and side OLED display. Powered by single 18650 cell, it reaches a mighty 80W output along with a sequence of other unique features including 2A quick charge, preheat and LED light with changeable colors. Featuring the intuitive slide-top fill solution and creative childproof lock system, the Elabo mini atomizer with powerful WS coil can perfectly pairs with SINUOUS P80.


Replacement Front + Back Cover Plates for Icarus Style BF Squonk Mechanical Box Mod $7.99
These Replacement Black Front + Back Cover Plates are made from aluminum and suitable for Icarus Style BF Squonk Mechanical Box Mod.
This product comes with 2 cover panels (1 x front cover panel, 1 x back cover panel).This product also have several color to choose.


Original IJOY Replacement Sleeve for Limitless Lux 215W TC VW Mod $14.99
Original IJOY replacement sleeve is suitable for Limitless Lux 215W TC VW variable wattage box Mod. Get one to made your mod different.

 

[GinaVape]

Rogue Engraved Mechanical Mod Clone $21.99
The Rogue mechanical mod clone is constructed from stainless steel in 24mm diameter. It features artistic engraved pattern on the surface of the mod. It is powered by 1 x 18650 battery (not included). It comes with spring firing button for convenient use.This product have serveral colors to choose.


Original Laisimo F4 360W TC VW Variable Wattage Box Mod $64.99
Laisimo F4, max to 360W, gives you enough power with 4 x 18650 batteries, or use 2 x 18650 to reach 220W, supporting resistance as low as 0.05 ohm under TC mode. It features HD 1.3inch screen to display detailed vaping information, customizable colorful LED light, multiple protection, including low voltage protection, high temp protection, working overtime protection, output short-circuit protection, low and high resistance protection.This product have serveral colors to choose.


Negus Hybrid Mechanical Mod Clone $25.99
The Negus Mechanical Mod Clone is constructed from brass and in 24mm diameter. It features 510 hybrid connection and magnetic fire button. This mod is powered by one 18650 battery (not included).This product have serveral colors to choose.


Negus Hybrid Mechanical Mod Clone + Negus RDA Kit Clone $36.99
Mod:
The Negus Mechanical Mod Clone is constructed from brass and in 24mm diameter. It features 510 hybrid connection and magnetic fire button. This mod is powered by one 18650 battery (not included).
RDA
This RDA is constructed from brass and in 24mm diameter. It features middle adjustable air slots for airflow control.Please Note: This mod is in Gradient, so there may be a little color difference.This product have serveral colors to choose.


Original Wotofo Serpent SMM RTA Rebuildable Tank Atomizer $21.99
The Wotofo Serpent SMM 24mm RTA is designed by Wotofo and Suck My Mod. The Serpent SMM features a unique redirected airflow system which brings air in from a dual adjustable bottom airflow control ring, and redirects the air up into the posts of the build deck where it exits parallel with the coil.


Kennedy 25 RDA Rebuildable Dripping Atomizer Clone $7.99
The Kennedy 25 RDA Clone is constructed from aluminum in 25mm diameter. It feature two posts large build deck for easy coil building, deep juice well, and comes with bottom airflow control for better flavor.This product have serveral colors to choose.


Original Oumier Maximus Max RDTA Rebuildable Dripping Tank Atomizer $20.99
The 24mm Maximus Max RDTA features an innovative square liquid guiding hole pairing with top central hole filling, a precise airflow design for three different adjusting modes, a large post deck for single or dual coil building, a 3ml Juice capacity with wide wicking area and deep saturation. All parts are detachable and with the maximum convenient in coil building.This item also has a black panting version to choose.


Gorgon RDCA Rebuildable Dripping Customizable Atomizer Clone $17.99
The Gorgon RDCA Clone is constructed from stainless steel in 25mm diameter. It features two posts design large build deck for easy coil building. The innovative airflows degisn features a top airflow ring and a bottom airflow ring, and both of them have 6 air holes, totally 12 holes for efficient airflow control.


810 Drip Tip for 528 Goon / Goon LP RDA / Kennedy 24 / 25 RDA / Battle RDA $2.99
The 810 drip tip is made from FRP (Fiber-reinforced Plastic) with 810 connector. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Reload RTA.This item have both 12mm and 16 mm version.

 

[GinaVape]

Broadside Mechanical Mod Clone $17.99
The Broadside Mechanical Mod Clone is constructed from brass and powered by 1 x 18650 / 20700 battery (not included). Mechanical button is with 3 points of contact, no springs or magnets needed to help to reduce hot buttons and misfires.This product also have many colors to choose


Deathwish Death Wish RDA Clone Rebuildable Dripping Atomizer with BF Pin $8.99
The Deathwish RDA Clone is constructed from stainless steel in 24mm diameter. The build deck offers a large build area with clamp style terminals that utilize top mounted screws for fixing the clamps. The RDA is designed for large coils and single coil building. The RDA also features adjustable back airflow through the posts as well as adjustable side airflow.
The RDA comes with bottom feeder pin.


SXK Hussar Clone RDTA Rebuildable Dripping Tank Atomizer $13.90
he SXK Hussar RDTA Clone Rebuildable Dripping Tank Atomizer is constructed from 316 stainless steel in 22mm diameter. It comes with heat dissipation design on the top cap. The RDA features a beautiful and functional deck, with one injection hole and two holes for cotton on it. E-juice injection can be quite easy without taking off any lid. It is designed for single coil building. The RDA also has air holes on the middle side for airflow control.
Please Note: This RDTA is without bottom feeder pin.


510 Small Bore Drip Tip for RDA / RTA / Clearomizer $1.99
This is an 510 small bore drip tip made from resin. The connector is 8.5mm in outer diameter. The mouthpiece is 10mm in outer diameter. With the hollow center, this 510 drip tip will bring you good vaping experience!
This drip tip will be shipped in random color (1 piece).


510 Wide Bore Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $4.99
This is an 510 wide bore drip tip made from resin. The connector is 8.5mm in outer diameter. The mouthpiece is 13.6mm in outer diameter. With the hollow center, this 510 drip tip will bring you good vaping experience!
This drip tip will be shipped in random color (1 piece).


510 Wide Bore Drip Tip for RDA / RTA / Clearomizer $1.99
This is an 510 wide bore drip tip made from resin. The connector is 8.5mm in outer diameter. The mouthpiece is 15mm in outer diameter. With the hollow center, this 510 drip tip will bring you good vaping experience!
This drip tip will be shipped in random color (1 piece).


810 Wide Bore Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $4.99
This is an 810 wide bore drip tip made from resin. The connector is 12.5mm in outer diameter. The mouthpiece is 16mm in outer diameter. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Reload RTA.!
This drip tip will be shipped in random color (1 piece).


Original Tesiyi T2 Smart Digital Charger for 18650 Battery $18.99
The Original Tesiyi T2 Smart Digital Charger is used to charge 18650 batteries for e-cigarettes. Its features maximum capacity of 25.3W, DC 5V / 2.1A output, DC5V / 2A input, 0.3mAh self-discharge (per day). The charger is applicable to 3.7V 18650 lithium battery.
This charger has two slots for 2 x 18650 batteries (not included).This product also have another color to choose.


Original Tesiyi T4 Smart Digital Charger for 18650 Battery $24.99
The Original Tesiyi T4 Smart Digital Charger is used to charge 18650 batteries for e-cigarettes. Its features maximum capacity of 53.3W, DC 5V / 2.1A output, DC5V / 2A input, 2.4mAh self-discharge (per day). The charger is applicable to 3.7V 18650 lithium battery.
This charger has four slots for 4 x 18650 batteries (not included).This product also have another color to choose.


Coppervape Replacement 510 Drip Tip for Skyline RDA Clone $1.49
The replacement 510 drip tip is suitable for Coppervape Skyline RDA Clone. It is made from PEI with 510 connector. The mouthpiece is 11mm diameter and the connector is 8.5mm diameter. With the hollow center, this 510 drip tip will bring you good vaping experience!


Coppervape Spare Tank Sleeve for Skyline RDA Clone $1.45
The spare tank sleeve is suitable for Coppervape Skyline RDA Clone. It is made from glass.


Coppervape Spare Airdisk Set for Skyline RDA Clone $5.29
The airdisk, with special design and high precision, is a machined part for the Skyline deck, which regulates the airflow to your resistance and defines how tight or open for your draw. Airdisks are made from high quality food grade thermoplastic peek which has excellent high temperature resistance and fits perfectly in the slot of the Skyline deck.
This product comes with 8 PCS in 1 set.

 

[GinaVape]

FrankenSkull Mechanical Box Mod Clone $14.99
The FrankenSkull Mechanical Box Mod Clone is constructed from PC. It comes with a built-in dropper bottle to support bottom feed. It is powered by 1 x 18650 battery (not included).
Atomizer is not included in this product.This product also has several colors to choose.


Azathoth RDA Clone Rebuildable Dripping Atomizer $8.59
The Azathoth RDA Clone is constructed from stainless steel in 24mm diameter. It features two-post design, coming with four large terminals for locking wires very easily. It also features bottom and side airflow system to achieve adjustable airflow control. The RDA comes with an 810 drip tip.This product also has another color to choose.


Deathwish Death Wish RDA Clone Rebuildable Dripping Atomizer with BF Pin $8.99
The Deathwish RDA Clone is constructed from stainless steel in 24mm diameter. The build deck offers a large build area with clamp style terminals that utilize top mounted screws for fixing the clamps. The RDA is designed for large coils and single coil building. The RDA also features adjustable back airflow through the posts as well as adjustable side airflow.
The RDA comes with bottom feeder pin.This product also has another color to choose.


Original Sense Blazer Sub-R RDA + Sub Ohm Tank Atomizer $31.99
The Sense Blazer Sub-R RDA and Sub Ohm Tank is one of the most unique atomizers that combine both a RDA and Sub Ohm Tank into a single system. It has been carefully crafted to combine an RDA and Sub Ohm tank into one unit that can be used separately or together. This product also has another color to choose.


Original Cola Man E-juice Liquid for E-cigarettes $19.99
Imagine an ice cold cola, fresh out of the refrigerator on a hot summer day. Refreshing crisp cola, made to perfection for every inhale you take! This e-juice comes with 60ml capacity, 3mg/ml nicotine level, 70% VG and 30% PG content.


Original Mouse Chef Jerryberry E-juice Liquid $25.99
Jerryberry E-juice Liquid by Mouse Chef is a juicy apple and sweet raspberries blended together into a delicious cupcake dessert. Jerryberry comes with 100ml capacity, 3mg/ml nicotine level, 70% VG and 30% PG content.


Original Mouse Chef Pinky The Brain E-juice Liquid $25.99
Pinky The Brain E-juice Liquid by Mouse Chef is a tasty sweet candy apple blended to perfection with a crisp, juicy, sweet ripe pear. Pinky The Brain comes with 100ml capacity, 3mg/ml nicotine level, 70% VG and 30% PG content.


810 Drip Tip for SMOK TFV12 / TFV8 / TFV8 Big Baby $1.99
The 810 drip tip is made from acrylic in 18mm overall diameter and 15mm height. The connector is 12.5mm in diameter. It is suitable for SMOK TFV12 tank, TFV8 tank, TFV8 Big Baby Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.This product also has several color to choose.


SXK Replacement Tank Sleeve for Taifun BT RTA Clone $2.09
The SXK Replacement Tank Sleeve is made from glass. It is suitable for Taifun BT Style RTA.
This product comes with 2 PCS in 1 pack.


SXK Spare Heating Wires for Taifun BT RTA Clone $1.69
The SXK Spare Steel Heating Wires is made from steel. It is suitable for Taifun BT RTA Clone.
This product comes with 3 PCS in 1 pack.


SXK Spare Net for Taifun BT Style RTA $2.99
The SXK Replacement Net is made from nickel. It is suitable for Taifun BT Style RTA.
This product comes with 5 PCS in 1 pack.

 

[GinaVape]

Original Tigertek Springer X RDA Rebuildable Dripping Atomizer $21.99
Please Note: This product will be shipped around June 30, 2017 (ETA, not guaranteed). The final shipping date depends on the manufacturer. We will try to get it delivered as soon as we can.
The Original Tigertek Springer X RDA Rebuildable Dripping Atomizer is constructed from stainless steel in 24mm diameter. It features two gold plated posts and supports both single and dual coils. It is easy to build coils by two built-in springs. Springer X comes with progressive adjustable airflow system to control airflow by adjustable top cap.This product also has a different color to choose.


Original Cthulhu MOD Azathoth RDA Rebuildable Dripping Atomizer with BF Pin $36.00
The Azathoth RDA by Cthulhu MOD follows the success of the GAIA RDTA, presenting one of the smoothest dual airflow systems. The Azathoth RDA is constructed from food grade stainless steel with a gold plated base in 24mm diameter. The internal chamber integrates a horizontal two-post, dual terminal per post design to accommodate a plethora of complex configurations and large coil structures. Similar to the GAIA RDTA, the Azathoth RDA has a dual airflow system with dual side air slots entering horizontally and dual bottom air slots that are redirected up and into the chamber.This product also has a different color to choose.


YFTK Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin $21.99
The YFTK Soul S RDA Clone is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control.
This RDA comes with bottom feeder pin.


810 Drip Tip for SMOK TFV12 / TFV8 / TFV8 Big Baby $1.99
The 810 drip tip is made from acrylic in 18mm overall diameter and 15mm height. The connector is 12.5mm in diameter. It is suitable for SMOK TFV12 tank, TFV8 tank, TFV8 Big Baby Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.


Heat Insulation Ring for E-cigarette Mod and Atomizer $0.99
This Heat Insulation Ring is made from PC material. It is installed between mod and atomizer to prevent leaking and being screwed tightly. It is also used to insulate heat between mod and atomizer, and it can be a decorative ring for your device.


YFTK Dripping Dropper Bottle for Squonk Bottom Feeder Mod $4.49
This YFTK dripping dropper bottle is made from silicone and has 30ml e-juice capacity. It is used for squonk bottom feeder mods which have built-in bottles. It can feed the built-in bottle with e-juice.
Only for bottom feeder mods that come with built-in bottle.


Original Xanic Blanc Lusso E-juice Liquid for E-cigarettes $11.99
Lusso by Xanic Blanc, the luscious honeydew melon milk flavor comes with a splash of milk and a hint of menthol to mimic ice pop. Lusso comes with 30ml capacity, 3mg/ml nicotine content, 70% VG and 30% PG.


Original Mad Hatter 120 Cream Pop E-juice Liquid for E-cigarettes $29.99
Another fantastic flavor brought to you by Mad Hatter. Enjoy a classic summer treat all year round with 120 Cream Pop. A creamy vanilla bean ice cream and orange sherbet flavored popsicle in e-liquid form! 120 Cream Pop comes with 120ml capacity, 3mg/ml nicotine content, 70% VG and 30% PG.


Original MOB Luciano E-juice Liquid for E-cigarettes $14.99
Blueberries all smothered into a warm and buttery muffin! On the inhale it will be smooth and subtle, then on the exhale you will get the taste all at once of a warm and delicious Blueberry Muffin. Luciano comes with 30ml capacity, 3mg/ml nicotine content.This item also has different flavor and capcity to choose.

 

[GinaVape]

Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod $79.90
The Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod is constructed from zinc alloy and stainless steel, coming with mechanical shape. Powered by 2 x High drain 18650 batteries, Snowwolf Vfeng can reach maximum output up to 230W. It has a 1.3 inch TFT color screen, while on the back side there is changeable LED Snowwolf logo.This item also has another color to choose.


AV Series Fast Twist Hybrid Mechanical Mod Clone $24.99
The AV Series Fast Twist Style Hybrid Mechanical Mod is constructed from brass. The Fast Twist style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!
Please note: this mod is in gradient, so there may be a little color difference.This item also has another material to choose.


AV Lyfe Dimple Hybrid Mechanical Mod Clone $24.99
The AV Lyfe Dimple Style Hybrid Mechanical Mod is constructed from brass. The Fast Twist style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!
Please note: this mod is in gradient, so there may be a little color difference.This item also has another material to choose.


YFTK Soul S RDA Rebuildable Dripping Atomizer with BF Pin Clone $21.99
The YFTK Soul S Style RDA is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control.
This RDA comes with bottom feeder pin.


Original Joyetech ProCore Remix 1 Equals 4 RDA / RTA / Sub Ohm Tank Atomizer $30.89
Designed as an all-round atomizer with its handy flip-to-open top cap, the ProCore Remix was meant to be used as an RTA, RDA or sub-ohm atomizer as you prefer. Featuring an rebuildable tank system, the ProCore Remix atomizer has a wide open space to rebuild coils, no matter single or dual. Being simple and convenient, the huge airflow slot is meant for large vapor production and optimal flavor. Paired with the patented flip system, the ProCore Remix is sure to please any builders' desire.


Original VAPJOY HITMAN RDA Rebuildable Dripping Atomizer $29.99
The HITMAN RDA 24 is designed for Pursuit of Flavor. It featured with 24mm diameter, 304 stainless steel material, and PEI inner cap. 810 connector offers wide option to try various drip tips for your own style. With middle airflow control design, there is absolutely no e-juice leaking. The HITMAN RDA features an innovative build deck that supports single coil building, which is perfect for the vapers who chase clouds and pure favors.


Taifun BT RTA Rebuildable Tank Atomizer Clone $18.99
The Taifun BT style RTA is made from 316 stainless steel and glass in 23mm diameter and holds 5ml capacity. The Taifun BT style RTA does not use traditional coils with wires but unbelievable durable stainless steel mesh with an extra-large surface for a brand new vaping experience, massive vapor clouds and flavor beyond words.


Negus RDA Rebuildable Dripping Atomizer Clone $13.99
This RDA is constructed from brass in 24mm diameter. It features dual-post deck for both single and dual coil and middle adjustable air slots for airflow control. It matches perfectly with Negus Style Hybrid Mechanical Mod. It comes with 810 removeable drip tip.This item also has several other colors to choose.


YFTK Little Bang RDA Rebuildable Dripping Atomizer Clone with BF Pin $20.59
The YFTK Little Bang Style RDA is constructed from 316 stainless steel in 18mm diameter. It features a two-post build deck design and adjustable airflow. It comes with 510 removeable drip tip.
The RDA comes with bottom feeder pin.This item also has another color to choose.


Original Innokin Oceanus iSub 110W VW Variable Wattage Mod + iSub VE Tank Kit $45.99
Oceanus iSub is the latest sub ohm mod kit from Innokin. It is a single battery mod that holds a large capacity 20700 battery and can reach maximum power output up to 110W. Its sleek design is stylish, durability, and powerful. This compact device comes with the iSub VE tank atomizer, which operates 0.5 ohm BVC coil heads for powerful sub ohm vaping.This item also has another color to choose.


Original Hellvape Trishul Mechanical Mod + Trishul RDA Kit $50.00
Mod:
The Trishul Mechanical Mod is constructed from hard hit naval brass in 24mm diameter. It features hybrid contact and engraved button for hit confidence. It is powered by 1 x 18650 battery (not included).This item also has another color to choose.
RDA:
Trishul RDA is constructed from navel brass with 24k gold plated deck. It is 24mm in diameter. It features Fused Clapton and Alien coils friendly post, and top airflow for clean flavor taste. This RDA comes with bottom feeder pin.


Original VapeThink S-Alien Kanthal A1 Pre-Coiled Heating Wires $7.99
The Original VapeThink S-Alien Pre-Coiled Heating Wire is made from Kanthal A1 wires and features 0.2 ohm. This pre-coiled heating wire comes with 32GA coils. This heating wire will be a good vaping choice for DIY.
This product comes with 10 PCS in 1 pack.


Original VapeThink Satan V1 Multicolor SS316 Pre-Coiled Heating Wires $4.99
The Original VapeThink Satan V1 Multicolor Pre-Coiled Heating Wire is made from SS316 wires and features 0.2 ohm. This pre-coiled heating wire comes with (32GA x 26GA) x 2 coils. This heating wire will be a good vaping choice for DIY.
This product comes with 10 PCS in 1 pack.


YFTK Replacement Bottom Feeder Pin for Speed Revolution RDA $1.89
This bottom feeder pin is made from 316 stainless steel. It is suitable for Speed Revolution RDA.

 

[GinaVape]

Original Envii Loch Ness 150W TC VW Variable Wattage Box Mod $87.99
The Loch Ness originally was a handmade, high end mod, highly desired by mod collectors around the world because of its design, form factor, exclusivity and overall quality. The large firing button is placed on an angle that allows for use in either orientation, while the adjustment buttons are also positioned above the screen to allow for one handed usage.


Hidra BF Mechanical Box Mod Clone $22.99
The Hidra BF Mechanical Box Mod Clone is made from PC and powered by 1 x 18650 battery (not included). It is convenient to take off the cover by an inner stripe. The mod has a built-in 8ml dropper bottle for bottom feeder.
The Negative contract is spring to protect your battery.


YFTK SVA Punto Zero BF Squonk Mechanical Box Mod Clone $39.99
The YFTK SVA.0 Punto Zero Mechanical Box Mod Clone is a simple and practical mechanical squonk box mod. It features a magnetic door and a wide opening on it for easily taking off the door. Inside there is a built-in bottle for bottom feeder. The mod is powered by 1 x 18650 battery (not included). 510 connector matches most stardard atomizers.This product also have another different color to choose.


Original Sigelei Meteor RDTA Rebuildable Dripping Tank Atomizer $33.99
The Sigelei Meteor RDTA Tank perfectly matches the Kaos Spectrum mod, but this RDTA is also compatible with other mods. Meteor RDTA features two posts deck for both single or dual coil, 4ml capacity tank, adjustable top cap and middle air slots for airflow control.
The RDTA comes with blue silicone ring for decoration. The light on the tank is powered by the mod and the wattage setting should be above 20W.


Original IJOY RDTA 5S Rebuildable Dripping Tank Atomizer $32.99
The IJOY RDTA 5S is the sixth generation model in the RDTA line and implements an innovative central fill design, two post gold-plated build deck, dual adjustable airflow system, and a push and lock body section which protects the glass and makes wicking easier.This product also have several different color to choose.


Sith B2 RDA Rebuildable Dripping Atomizer with BF Pin Clone $7.99
The Sith B2 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts build deck for both single and dual coil. With 2 middle side air slots and 2 air holes, the dual airflow system is more flexible and great for vapor production. Each part of Sith B2 is easy to disassemble, making it convenient to maintain and clean.This product also have several different color to choose.


Original Envii Yeti RDA Rebuildable Dripping Atomizer $41.99
The Yeti is a very simple atomizer, but brings a new meaning to "hot vape". The thick outer sleeve absorbs a lot of the heat from your coils so it will never get hot no matter how much you vape it. The simple two post design makes this extremely easy to build on whether you are using fancy or normal wire.This product also have several different color to choose.


Replacment Wide Bore Drip Tip for IJOY RDTA 5 Atomizer $1.85
The replacement drip tip is a wide bore drip tip made from resin. It measures 18.7mm in outer diameter and 6.8mm in height. It is suitable for IJOY RDTA 5 atomizer.
This drip tip will be shipped in random color (1 piece).

 

[GinaVape]

Original VGOD Elite Hybrid Mechanical Mod $99.99
VGOD Elite, this elegantly designed mechanical mod features a "flare grip" chassis with hard hitting copper construction, prominently featuring its emboldened VGOD flag crest design. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.


Original Tigertek Springer X RDA Rebuildable Dripping Atomizer $22.99 after add to cart
The Original Tigertek Springer X RDA Rebuildable Dripping Atomizer is constructed from stainless steel in 24mm diameter. It features two gold plated posts and supports both single and dual coils. It is easy to build coils by two built-in springs. Springer X comes with progressive adjustable airflow system to control airflow by adjustable top cap.This item also have several color to choose.


Original Augvape Druga RDA Rebuildable Dripping Atomizer $28.79 after add to cart
Original Augvape DRUGA RDA Rebuildable Dripping Atomizer is a design that we have not seen before in RDA and probably in most atomizers engineering. DRUGA RDA is the 1st atomizer which use CSS (Clamp Snag System) for its dual posts to make your coils installation easy peasy and it allows for a wider variety of coil structure compatibility.


SXK V Power Sub Ohm Tank Atomizer Clone $13.99
The SXK V Power Style Sub Ohm Tank is constructed from stainless steel in 22mm diameter. The pre-installed V Power coil head has a resistance of 0.5 ohm. SXK V Power tank is also compatible with Aspire Triton and Atlantis coil heads. This tank feature top filling system and bottom adjustable airflow.


RDTA Rebuildable Dripping Tank Atomizer $9.99
This RDTA is constructed from stainless steel in 22mm diameter. It features a two post deck for both single and dual coil building. The adjustable top cap and dual middle side air slots work together to control the airflow. The RDTA comes with a removable POM drip tip. All the parts can be easily disassembled for maintenance and cleaning.


Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.99
The Kennedy V5 Style RDA is constructed from stainless steel in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough place for building coils more easily.
This RDA comes with bottom feeder pin.This item also have several color to choose.


Goon 1.5 RDA Rebuildable Dripping Atomizer Clone $6.99
The Goon 1.5 Style RDA is constructed from aluminum (top cap + tank sleeve) with a stainless steel base. It measures 24mm in diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.This item also have several color to choose.


SXK The Flave RDA Rebuildable Dripping Atomizer Clone with BF Pin $12.59 after add to cart
The SXK Flave RDA is constructed from 316 stainless steel in 24mm diameter. It features two post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. Insulation material helps this RDA to avoid any leaking of e-juice. The RDA comes with wide bore drip tip.
This RDA comes with bottom feeder pin.


Bane Venom Hybrid Mechanical Mod + Sith B2 RDA Kit Clone $24.99
Mod:
The Bane Venom Style Mechanical Mod is constructed from brass. It measures from 28 to 30mm in diameter. The half split structure gives users great security and convenience. You only need to twist the two parts of the mod counter-clockwise, to separate the anode from the atomizer completely. It also allows you to replace the batteries more quickly and safely.
RDA:
The Sith B2 Style RDA is constructed from stainless steel in 24mm diameter. It features two posts build deck for both single and dual coil. With 2 middle side air slots and 2 air holes, the dual airflow system is more flexible and great for vapor production. Each part of Sith B2 is easy to disassemble, making it convenient to maintain and clean. This RDA comes with bottom feeder pin to match squonk mods.


510 Drip Tip + 810 Drip Tip Kit for TFV8 / TFV12 / Goon /Kennedy $5.99
The 4 in 1 drip tip kit comes with 2 x 510 drip tips and 2 x 810 drip tips. The dimensions of 510 drip tips are 10mm (D) x 18mm (H) and 14mm (D) x 19.5mm (H). The dimensions of 810 drip tips are 16mm (D) x 12mm (H) and 16mm (D) x 18mm (H). The 4 in 1 drip tip kit will surely meet different needs and help you enjoy vaping. These drip tips will be shipped in random color (4 PCS).


Tri-spinner Fidget Toy Focus EDC Toy $12.99
The Tri-Spinner Hand Spinner Focus Fidget Toy EDC Toy is constructed from Stainless Steel. It has perfect balanced weights and smooth surface. The Hand Fidget Tri-Spinner Focus Toy is a perfect fidget toy to keep your hands busy or to just play with.

 

[GinaVape]

Original VGOD Elite Hybrid Mechanical Mod $99.99
VGOD Elite, this elegantly designed mechanical mod features a "flare grip" chassis with hard hitting copper construction, prominently featuring its emboldened VGOD flag crest design. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.


Original Tigertek Springer X RDA Rebuildable Dripping Atomizer $22.99 after add to cart
The Original Tigertek Springer X RDA Rebuildable Dripping Atomizer is constructed from stainless steel in 24mm diameter. It features two gold plated posts and supports both single and dual coils. It is easy to build coils by two built-in springs. Springer X comes with progressive adjustable airflow system to control airflow by adjustable top cap.This item also have several color to choose.


Original Augvape Druga RDA Rebuildable Dripping Atomizer $28.79 after add to cart
Original Augvape DRUGA RDA Rebuildable Dripping Atomizer is a design that we have not seen before in RDA and probably in most atomizers engineering. DRUGA RDA is the 1st atomizer which use CSS (Clamp Snag System) for its dual posts to make your coils installation easy peasy and it allows for a wider variety of coil structure compatibility.


SXK V Power Sub Ohm Tank Atomizer Clone $13.99
The SXK V Power Style Sub Ohm Tank is constructed from stainless steel in 22mm diameter. The pre-installed V Power coil head has a resistance of 0.5 ohm. SXK V Power tank is also compatible with Aspire Triton and Atlantis coil heads. This tank feature top filling system and bottom adjustable airflow.


RDTA Rebuildable Dripping Tank Atomizer $9.99
This RDTA is constructed from stainless steel in 22mm diameter. It features a two post deck for both single and dual coil building. The adjustable top cap and dual middle side air slots work together to control the airflow. The RDTA comes with a removable POM drip tip. All the parts can be easily disassembled for maintenance and cleaning.


Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.99
The Kennedy V5 Style RDA is constructed from stainless steel in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough place for building coils more easily.
This RDA comes with bottom feeder pin.This item also have several color to choose.


Goon 1.5 RDA Rebuildable Dripping Atomizer Clone $6.99
The Goon 1.5 Style RDA is constructed from aluminum (top cap + tank sleeve) with a stainless steel base. It measures 24mm in diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.This item also have several color to choose.


SXK The Flave RDA Rebuildable Dripping Atomizer Clone with BF Pin $12.59 after add to cart
The SXK Flave RDA is constructed from 316 stainless steel in 24mm diameter. It features two post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. Insulation material helps this RDA to avoid any leaking of e-juice. The RDA comes with wide bore drip tip.
This RDA comes with bottom feeder pin.


Bane Venom Hybrid Mechanical Mod + Sith B2 RDA Kit Clone $24.99
Mod:
The Bane Venom Style Mechanical Mod is constructed from brass. It measures from 28 to 30mm in diameter. The half split structure gives users great security and convenience. You only need to twist the two parts of the mod counter-clockwise, to separate the anode from the atomizer completely. It also allows you to replace the batteries more quickly and safely.
RDA:
The Sith B2 Style RDA is constructed from stainless steel in 24mm diameter. It features two posts build deck for both single and dual coil. With 2 middle side air slots and 2 air holes, the dual airflow system is more flexible and great for vapor production. Each part of Sith B2 is easy to disassemble, making it convenient to maintain and clean. This RDA comes with bottom feeder pin to match squonk mods.


510 Drip Tip + 810 Drip Tip Kit for TFV8 / TFV12 / Goon /Kennedy $5.99
The 4 in 1 drip tip kit comes with 2 x 510 drip tips and 2 x 810 drip tips. The dimensions of 510 drip tips are 10mm (D) x 18mm (H) and 14mm (D) x 19.5mm (H). The dimensions of 810 drip tips are 16mm (D) x 12mm (H) and 16mm (D) x 18mm (H). The 4 in 1 drip tip kit will surely meet different needs and help you enjoy vaping. These drip tips will be shipped in random color (4 PCS).

 

[GinaVape]

Original Sense Blazer Nano Sub Ohm Tank Atomizer $14.99
The Sense Blazer Nano Sub Ohm Tank is the follow up to the phenomenal Blazer Mini Sub Ohm Tank, coming with a smaller size and higher resistance replacement atomizers. Measuring at 22.8mm in diameter, the Sense Blazer Nano twists to fill with top fill design and can hold 2ml of E-juice. Each set includes the 1.2 ohm coil and the 1.8 ohm coil, both rated for up to 40W of output. Dual 14mm by 1.5mm air slots at the base provide more than ample maximum airflow.This product also has several color to choose.


Original Envii Terra RTA Rebuildable Tank Atomizer $39.99 after add to cart
Enjoy promotion price ($39.99) by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
The Artisan RTA was designed from the ground up to bring out the slightest notes in whatever liquid you are vaping on. Although the Artisan works best paired with single clapton or alien coils, you'll be pleasantly surprised with almost anything you build.This product also has several color to choose.


Original Envii Artisan RTA Rebuildable Tank Atomizer $35.99 after add to cart
Enjoy promotion price ($35.99) by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
The Artisan RTA was designed from the ground up to bring out the slightest notes in whatever liquid you are vaping on. Although the Artisan works best paired with single clapton or alien coils, you'll be pleasantly surprised with almost anything you build.This product also has several color to choose.


Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.99
The Kennedy V5 Style RDA is constructed from stainless steel in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough place for building coils more easily.
This RDA comes with bottom feeder pin.This product also has several color to choose.


Original Armageddon MFG Apocalypse GEN 2 RDA Rebuildable Dripping Atomizer $59.99
Limited quantity. We are offering a flash sales, so it is a chance to get the RDAs at such a low price now.
The Apocalypse Gen 2 RDA by Armageddon MFG is the first generation of the Apocolypse RDA. The clamp design has a massive space in each clamp which provides space for mounting the most complex and insane coil builds. Coupled with the deep juice well, large build deck, durable post clamps and extended post screws, the Apocalypse is a builder's dream. The unique teardrop shape airflow control provides extra customization and the sleeve has the "APOCALYPSE" logo engraved into one side and the Gas Mask Logo etched on the opposite side.This product also has several color to choose.


Original Sense Blazer Nano Replacement Coil Heads $10.99
The Original Sense replacement coil head is designed for Sense Blazer Nano Tank. It features triple parallel wire with a resistance of 1.2 ohm and the recommended wattage range is 15~40W.
This product comes with 5 PCS in 1 pack.This item also have a 1.8 ohm version to choose.


Original Youde UD Screwdrivers Set for E-cigarettes $7.99
The Original Youde UD Screwdrivers Set comes with six screwdrivers in one set, including size of PH0, PH1, T0.8mm, 2.0mm, 2.5mm, 3.0mm. This screwdrivers set is a great choice for DIY builders.
This product comes with 6 PCS in 1 set.


Original Youde UD All in One Coil Jig for E-cigarettes $11.99
The Original Youde UD All in One Coil Jig comes with one coil jig with multi-diameter heads, four hexagonal shape sticks with different diameter screw heads. The coil jig and the handle of screwdrivers are made from stainless steel, and the screw heads are stainless iron. This coil jig set is used to adjust coils. It is a good choice for DIY vaping.