510 atties wick issues

[The Big Chief]

I'm curious if anyone out there has had issues with 510 atty wicks not being properly placed...touching coils and whatnot, just being a pain.

 

[LowThudd]

I'm curious if anyone out there has had issues with 510 atty wicks not being properly placed...touching coils and whatnot, just being a pain.

The wick is supposed to go through the coils and touch the bridge.

 

[basilray]

Beats me...since I only drip, I take my wicks out before I start using an atty anyways!

 

[The Big Chief]

The wick is supposed to go through the coils and touch the bridge.

Not on a 510 bro. The wicks are supposed to be kind of a bowtie, sandwiched between a piece of flattened steel and the bridge, and not supposed to touch the coil. Any wick touching the coil on a 510 would burn pretty quickly.

 

[LowThudd]

Not on a 510 bro. The wicks are supposed to be kind of a bowtie, sandwiched between a piece of flattened steel and the bridge, and not supposed to touch the coil. Any wick touching the coil on a 510 would burn pretty quickly.

I suggest you read these two threads(again if you have already). You will find that the wick is supposed to go through the coils on the atty, and touch the bridge.

http://www.e-cigarette-forum.com/fo...your-510-atomizer-step-step-801-901s-too.html

http://www.e-cigarette-forum.com/fo...zer-coil-101-actual-working-methods-only.html

 

[thephoenix]

Hey, man.

I've found there can be draw issues if the steel mesh ontop of the bridge is too thick...some 510 atomizers ship this way...

i stick a pair of tweezers into the atty and squeeze the steel mesh till it's about the size of the metal bridge beneath...this generally will increase air flow and get it kicking again!