75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil

[100%VG]

Found my Disrupter with the eleaf tank! I put the eleaf with a nickle coil on the Target mod at 560 degrees. The wattage is varying mostly between 11 and 14, which is much higher than the cCell did, and the vapor is a little bit warmer. It's stable, though, and I can run through the temperature range without getting those super-heated hits. Thanks, @100%VG, for suggesting this. I don't know why it didn't occur to me to try a different nickle head on the Target, but it didn't!

You're welcome, and I'm glad it helped.

Actually if a tank can't handle 100% VG I have no use for it.

All my RTA's work great with 100% VG and besides the Vaporesso right now I use no blister pack coil tanks.

I'm just playing with it as I won it, I would not have bought one.

I'll try the kanthal coil later on a Mech, the NI200 coil still has a funky side taste to it after 1.5 tanks.

Not impressed, tho TC works on my Mini+ as it should work.

Compared to SS430 coils with organic cotton wicks the Ceramic NI200 is almost foul tasting.

Eric

I've never tasted Nickel from anything, and I've used quite a few Ni200 Heads. I also build RDAs and RBA Sections with 30g and 28g Ni200. But I do know that some people can taste it. Sorry that's the case with you. I'm hoping that Vaporesso will make these cCells in versions with Titanium and Stainless Steel for TC Mods that can use them.
.

 

[100%VG]

I still haven't tried stainless, but I wanna! I keep hearing how great it is, and I love that it can be used on anything. I can build coils but I still like to buy the premade ones. I seriously need to start rebuilding those...

In my experience with SS, it runs cooler than Kanthal does, with the same Ohms and Watts. It's great for Parallel Wire Single Coils. I've used Parallel SS Heads and run them over 100 Watts with ease, because they are cooler, and the Watts per wire is half of the total being applied.
.

 

[markfm]

Try other drip tips if you don't like the one the tank comes with. I changed to one I ordered from FastTech for a Subtank Mini, it snapped right in.

 

[USMCotaku]

Ok, i temp probed the ti wire using 26 gauge, and it regulates around 90-100 degrees celsius higher then displayed...my good results using Ti were because i was using 20 gauge, so heat up times are much slower

Sent with one hand, the other is busy vaping.

 

[cooladdict]

In my experience with SS, it runs cooler than Kanthal does, with the same Ohms and Watts. It's great for Parallel Wire Single Coils. I've used Parallel SS Heads and run them over 100 Watts with ease, because they are cooler, and the Watts per wire is half of the total being applied.
.

That's good to know! I am really interested in SS but I like a warmer vape. I'm glad I have one 200 watt mod!

 

[cooladdict]

Ok, i temp probed the ti wire using 26 gauge, and it regulates around 90-100 degrees celsius higher then displayed...my good results using Ti were because i was using 20 gauge, so heat up times are much slower

Sent with one hand, the other is busy vaping.

So does that mean it's safe or no?

 

[USMCotaku]

So does that mean it's safe or no?

Safe, but if using reasonable gauge wire ([emoji14]) you will need to set your temp lower then what you are shooting for

Sent with one hand, the other is busy vaping.

 

[cooladdict]

Safe, but if using reasonable gauge wire ([emoji14]) you will need to set your temp lower then what you are shooting for

Sent with one hand, the other is busy vaping.

I have 26 gauge. Is that reasonable?

 

[USMCotaku]

Yes....that gauge will put you at around 100 degrees off....so if you want to vape around 400 degrees, you will set the mod to 300

Sent with one hand, the other is busy vaping.

 

[USMCotaku]

Technically all guages of Ti will be off the same amount....mine just isnt heating up as fast as a smaller gauge would

Sent with one hand, the other is busy vaping.

 

[USMCotaku]

I'll try and pick up a small section of Ni tomorrow to see what this mod is really doing

Sent with one hand, the other is busy vaping.

 

[100%VG]

Sorry I've been away so long. I was making some DIY and doing this...

I have edited the cCell Dissection Video with YouTube Annotations to address my statement about the Cotton around the Ceramic, and to update it with some things I have learned about cCells. I'm going to tell Heaven Gifts and ask that they tell Vaporesso about the corrections I have made. I felt bad about having left it as it was for so long, now that more is known about them.
.

 

[Gfdeputy2]

I am happy to hear that this one is performing well at higher temps. It seems like no one is really a fan of nickle coils, so maybe Vaporesso will take this info and build us some Ti ceramic cCells!

Vaporesso told me SS coils are in the works not sure about Ti coils
Anyone know when the Kit will be available in the USA? Everywhere I look they are still on Pre-Order
& also is the Target Firmware up-gradable?

 

[tiburonfirst]

around 90-100 degrees celsius

are you sure you meant celsius?

 

[Eric Auer]

The 0.9 Kanthal coil works ok on the MVP20W. Running it at full 20W.

Not sure I like the taste of the kanthal either tho. Could be the ceramic too.

With the current coils available I won't be using this tank much, If at all.

I like the size of the tank, very portable. But I think I'll just get a Goblin Mini as my small tank option.

If they ever come out with a SS option I might re-visit it.

Eric

 

[USMCotaku]

are you sure you meant celsius?

Yes

Sent with one hand, the other is busy vaping.

 

[USMCotaku]

The 0.9 Kanthal coil works ok on the MVP20W. Running it at full 20W.

Not sure I like the taste of the kanthal either tho. Could be the ceramic too.

With the current coils available I won't be using this tank much, If at all.

I like the size of the tank, very portable. But I think I'll just get a Goblin Mini as my small tank option.

If they ever come out with a SS option I might re-visit it.

Eric

Funny, to me flavor is its biggest selling point[emoji14]

Sent with one hand, the other is busy vaping.

 

[tiburonfirst]

Yes

Sent with one hand, the other is busy vaping.

that would translate to an adjustment of 212 F

 

[USMCotaku]

Temp regulation has been all over the board on this one.....as off as kanthal mode has been good.....I'm hoping there will be an update for it [emoji14]

Sent with one hand, the other is busy vaping.

 

[USMCotaku]

that would translate to an adjustment of 212 F

Set to 200 degrees C, my probe measured up to 300....(I use celcius settings on the mod because thats what my probe measures in)....it spent most of the time in the 280-290 range, but because it did hit 300 I had to report such findings

Sent with one hand, the other is busy vaping.