75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil

[100%VG]

vaporesso told me SS coils are in the works not sure about Ti coils
Anyone know when the Kit will be available in the USA? Everywhere I look they are still on Pre-Order
& also is the Target Firmware up-gradable?

I have heard no mention of the Target being upgradable. But that doesn't mean that the Final Release Full Production version won't be. However, when my Sample is connected to a computer, the battery will be charged, but the Mod is not found as a USB Device.

 

[tiburonfirst]

that is a much bigger span than previously reported

 

[markfm]

Ok, i temp probed the ti wire using 26 gauge, and it regulates around 90-100 degrees celsius higher then displayed...my good results using Ti were because i was using 20 gauge, so heat up times are much slower

Sent with one hand, the other is busy vaping.

Dumb question, could this perhaps be it using a nickel tcr?

 

[Katya]

@100%VG

VG, is this the Melo coil that worked in your Target tank? Just wanna make sure before I pull the trigger.

Eleaf iJust 2 & Melo EC Dual Coil

I wonder if the Triton coil would work. I may grab one. Thoughts?

Aspire Triton Kanthal Coils

Thanks.

 

[USMCotaku]

Dumb question, could this perhaps be it using a nickel tcr?

Yes and no....yes, its why its off (it is a Ni only mod) but it was off more then the ni tcr shoukd have been....Ti on an Ni mod should be off by about 100 degrees F......not 100 degrees C

Sent with one hand, the other is busy vaping.

 

[tiburonfirst]

not 100 degrees C

exactly have you checked the accuracy on a nickel coil?

 

[cooladdict]

Vaporesso told me SS coils are in the works not sure about Ti coils
Anyone know when the Kit will be available in the USA? Everywhere I look they are still on Pre-Order
& also is the Target Firmware up-gradable?

That's great they are working on stainless coils! I was hoping that would be the case.

I don't know when they will be available here. I think they are still working out some bugs but they must be pretty darn close to release by now. I was wondering the same thing about firmware. I haven't heard anything at all about whether it is or not. Sorry I am not more help!

 

[cooladdict]

Funny, to me flavor is its biggest selling point[emoji14]

Sent with one hand, the other is busy vaping.

Me too! The kanthal coil has the purest flavor I have ever had from vaping.

 

[100%VG]

@100%VG VG, is this the Melo coil that worked in your Target tank? Just wanna make sure before I pull the trigger.
Eleaf iJust 2 & Melo EC Dual Coil

I wonder if the Triton coil would work. I may grab one. Thoughts?
Aspire Triton Kanthal Coils

Thanks.

Hi y'all. I've been out most of the afternoon.

Yes Sweet, The Melo EC Heads are supposed to fit the Melo 2, from what I read on Eleaf about them. Mine was the 0.5Ω Ti. I didn't realize it was Dual Coil, but even if mine isn't, I don't think that should matter.

I can't speak for the Triton Heads. The Target cCells will fit into the Atlantis, Triton, and others, because they are shorter. VapnFagan appeared to have a problem with his Atlantis Head in the Target Tank because it was too long/tall. I don't have an Atlantis or Triton Tank, so I cannot say. They could be too wide.
.

 

[100%VG]

Yes and no....yes, its why its off (it is a Ni only mod) but it was off more then the ni tcr shoukd have been....Ti on an Ni mod should be off by about 100 degrees F......not 100 degrees C.

Thanks for the clarification!

But would Ti be hotter or cooler? I think you've said hotter.
.

 

[cooladdict]

Hi y'all. I've been out most of the afternoon.

Yes Sweet, The Melo EC Heads are supposed to fit the Melo 2, from what I read on Eleaf about them. Mine was the 0.5Ω Ti. I didn't realize it was Dual Coil, but even if mine isn't, I don't think that should matter.

I can't speak for the Triton Heads. The Target cCells will fit into the Atlantis, Triton, and others, because they are shorter. VapnFagan appeared to have a problem with his Atlantis Head in the Target Tank because it was too long/tall. I don't have an Atlantis or Triton Tank, so I cannot say. They could be too wide.
.

I will take the kanthal one out of my tank (don't like the juice in there anyway, lol) and see if I can see any difference in size between the Atlantis coil and the cCell. I will also try and load an Atlantis coil into the Target tank and see what happens. I just so happen to have one lying around, lol.

 

[cooladdict]

Whelp, that's a big fat NO on the Atlantis coil. It might be that ring around the Atlantis coil, but I couldn't get it to screw into the tank. It certainly LOOKS like it will fit but it didn't.

 

[100%VG]

Whelp, that's a big fat NO on the Atlantis coil. It might be that ring around the Atlantis coil, but I couldn't get it to screw into the tank. It certainly LOOKS like it will fit but it didn't.

Thank you so much for that!

I didn't think to measure the diameter of the Ti Melo 2 Head, but it was shorter, it fit inside, and I used it with all the juice I had put in the Target Tank with no leaks or other problems, which was about 3/4 Tank.

I'd love to see this same thing tried with Triton Heads and other Heads from Tanks that the cCell is said to fit.
.

 

[cooladdict]

Thank you so much for that!

I didn't think to measure the diameter of the Ti Melo 2 Head, but it was shorter, it fit inside, and I used it with all the juice I had put in the Target Tank with no leaks or other problems, which was about 3/4 Tank.

I'd love to see this same thing tried with Triton Heads and other Heads from Tanks that the cCell is said to fit.
.

Hmm, I do have some Eleaf .25 ohm TC coils. I could try one of those and see if it fits, but I will have to wait until I get through at least part of this tank I just filled. I am using the kanthal cCell and I am trying to see if cleaning it brought back any flavor or not. It seems to have, even though the ceramic remained black. Pretty cool, huh?

 

[100%VG]

Hmm, I do have some Eleaf .25 ohm TC coils. I could try one of those and see if it fits, but I will have to wait until I get through at least part of this tank I just filled. I am using the kanthal cCell and I am trying to see if cleaning it brought back any flavor or not. It seems to have, even though the ceramic remained black. Pretty cool, huh?

Yes, that's cool. Congratulations!

I don't remember if I've said already or not, but my "revived" Ni200 Ceramic has been pretty much Black since the first Tank, but it continues to perform, so I keep using it. I want to see how long I find it acceptable. And I'm using the same DIY Cinnamon Red Hots that ruined it before, but I'm also using it on a different TC Mod. This is another reason I'd like to have more cCells of both types... to try them on other Mods.

Good Luck with your Eleaf Heads.
.

 

[USMCotaku]

exactly have you checked the accuracy on a nickel coil?

Not yet....i meant to pick up some nickel today....and completely forgot till it was too late
I'll get some tomorrow [emoji14]

Sent with one hand, the other is busy vaping.

 

[USMCotaku]

Thanks for the clarification!

But would Ti be hotter or cooler? I think you've said hotter.
.

Yes...Ti will be hotter then displayed temp

Sent with one hand, the other is busy vaping.

 

[100%VG]

Hello .. Hello .. Hello .. Hello .. Hello .. Hello




.

 

[cooladdict]

Hello .. Hello .. Hello .. Hello .. Hello .. Hello




.

Well hello, VG! You bored?

 

[100%VG]

Well hello, VG! You bored?

Not bored. Just wondering what everyone was up to today.
.